Transparent UMD ring mod by Everett

[4dP]

[youtube=425,350]3fsh7DdoELo[/youtube]

Transparent UMD ring mod by Everett

I used hot glue because its temporarily and can be removed easily, but you can use super glue for a more permanent solution. I may have used an excess amount of hot glue so a small amount can do

[DubbleDutch]

uh that is not the ring of light

this is

http://www.youtube.com/watch?v=D3Usz0rMN-M

the ring of light is the silver ring replaced with a plastic one with leds behind it
you can't see through the umd door

[ryan0]

he said transparent umd ring not umd ring of light.....duuuuuuuuuuh 

[zbblanton]

no lol he said ring of light in the video

[ryan0]

technically its still a ring of light...nobody can define it as this or that,cos they're both rings and they both have well..light!

[Timmy]

DD: Read the description, its the mod done by everett, dont know if you were here when he was

but you still didn't do it the same way 4dP, he actually dremelled out 2mm perspex to the same size as the steel ring on the psp in a torus shape so he could INSERT it in the center, im sorry but the way you did it was very inaccurite just randomly sticking the circle anywhere, also the material looks very flimsy, like im surprised hotglue didn't melt a hole through it 

You dont have to change the video if you dont want to but....yeah.....the above points were pretty obvious to me

POST DISCLAIMER

This is not an act of arrogance, it is constructive criticism

[4dP]

well i'm sure if had the time to do it exactly i would but this is a simpler way and alot of people do it this way

[whitetop]

thats what i did but i used strong plastic

[ryan0]

it looks like u used plastic from a cd case,that stuff can be awesome if you cut it to the exact shape and fit it in,like what i did to my xbox

[King Wolf 15]

Is the ring of light hard to make/install?

[4dP]

Is the ring of light hard to make/install?

well if you want to what i did it'll be easy but you want to do what the others complained about it'll be kinda difficult

[Ninja Dood]

I have a few questions about this mod

1.Did you use an Xacto knife to cut the PSP ring out of the door?
2.What kind of plastic did you use in the video?
3.Where can I get that plastic?

[4dP]

I have a few questions about this mod

1.Did you use an Xacto knife to cut the PSP ring out of the door?
2.What kind of plastic did you use in the video?
3.Where can I get that plastic?

1 dremel
2 you could use a cd case

[Newbi-Modder]

can tha same steps apply to tha slim psp