Author Topic: analogue wont return to center  (Read 2020 times)

Offline Nemesis

  • Millennium Poster
  • *
  • Posts: 1186
  • Post quality +0/-0
  • Gender: Male
analogue wont return to center
« on: February 09, 2008, 09:10:10 AM »
ive dis-assembled my analogue stick and put everything back together and now it wont return to the center. i move it to one side and it stays there. i have dis-assembled and re-assembled many times but it still does the same thing.

help would be appreciated

EDIT: i found out that when the circut board is not placed, it works but as soon as the pressure is applied from the circuit board it gets stuck.
what could b wrong?  :confused:
« Last Edit: February 09, 2008, 09:25:42 AM by Nemesis »

Offline prettierwendead

  • E = MC²
  • *
  • Posts: 327
  • Post quality +0/-0
  • Gender: Male
  • You Are My Living Legend
Re: analogue wont return to center
« Reply #1 on: February 09, 2008, 10:59:45 AM »
Make ure the spring is in place if it is in there just fiddle with it till it starts to self center

Offline FaT3oYCG

  • Registered BST
  • Granny Spanker
  • *
  • Posts: 444
  • Post quality +0/-0
  • Gender: Male
  • (Modder for hire) Live in your world, Mod in ours.
    • Modern-Gamer.co.uk
Re: analogue wont return to center
« Reply #2 on: February 09, 2008, 11:05:16 AM »
i was told that if you stick the spring in a central position with a tiny amount of super glue, when i say tiny, one knock will make the super glue come off, then put it together and move the stick in a circular motion it will break the super glue and self center much quicker
----- F@T3oYCG -----

Offline Nemesis

  • Millennium Poster
  • *
  • Posts: 1186
  • Post quality +0/-0
  • Gender: Male
Re: analogue wont return to center
« Reply #3 on: February 09, 2008, 11:07:24 AM »
i have centered it and stuff but my problem is when i move it to one side its doesnt move back when its all assembled together, but when its only the top bit without the sliders it works perfectly..

Offline Thorax

  • Acid Modder
  • *
  • Posts: 809
  • Post quality +1/-0
  • Gender: Male
Re: analogue wont return to center
« Reply #4 on: February 09, 2008, 12:15:42 PM »
I had the same problem. Watch this video. It helped me get fix mine when I took mine apart.

Offline Nemesis

  • Millennium Poster
  • *
  • Posts: 1186
  • Post quality +0/-0
  • Gender: Male
Re: analogue wont return to center
« Reply #5 on: February 09, 2008, 12:26:58 PM »
I had the same problem. Watch this video. It helped me get fix mine when I took mine apart.

it aint working but is it one of sum guy taking it apart and puttin it back together, only one i do see on google vids and youtube

Offline Thorax

  • Acid Modder
  • *
  • Posts: 809
  • Post quality +1/-0
  • Gender: Male
Re: analogue wont return to center
« Reply #6 on: February 09, 2008, 05:03:08 PM »
I think I know what the problem is. Make sure your spring didn't unhook from the loop.

Offline Nemesis

  • Millennium Poster
  • *
  • Posts: 1186
  • Post quality +0/-0
  • Gender: Male
Re: analogue wont return to center
« Reply #7 on: February 09, 2008, 05:07:21 PM »
I think I know what the problem is. Make sure your spring didn't unhook from the loop.

well it does unhook sometimes when i try to assemble it but i hook it back and assemble the top half and it works until i assemble it completely, maybe it unhooks den?  :confused:

 

SMF spam blocked by CleanTalk
SimplePortal 2.3.5 © 2008-2012, SimplePortal