cool psp

[cwn723]

hello, im a complete noob, and i really want a cool psp.

here is wat i want my psp to have:
-clear faceplate and back(umd, battery, panels)
-sound activated LEDS on the triger, dpad, and buttons(anywhere esle if possible)
-internal memory.

thats about it. i dont know how to put any of this stuff on, and i would love sugestions. i dont know how to soder, and i no that i probably need to to do this stuff. if sumone can help me, please write guides and notify me, because i want to learn how to do this, not want sumone to do it for me.

i got a psp v3.90m33 Phat 1001

[whitetop]

well i was going to give you links to the stuff you wanted doing but you dont know how to solder so you need someone to do it for you so this should have been put in mod for hire

[ProperBritish]

He can learn how, look in the wiki and/or tutorials section.

[GhoSt]

get used to some basic soldering and stuff then ask once you have a soldering iron and know how to solder 

[Luke]

you should do some soldering practice before you do  this dome this stuff is complicated for a noob once you've done that just look at tutuuriols they should help you

[cwn723]

any ideas on what to start soldering with?

[prettierwendead]

old electrical equipment that doesnt work is the best place to start just practise soldering to circuit boards and have peace of mind u wont break wot eva u solder 2

[cwn723]

ok, thanks guys, i got a 15W pointy tip solder iron at radio shack. im just practicing on regular wires now, but will soon move up to used circuitboards
 

[josh_moto x]

for my soldering practice i made a torch pretty sympol and great for practice just got a small can some soldering springing thingos and a switch wires and a hige 15mm Strobe led and just wired it all toghter and tried it got my self A homemade strobe light for under $5 =]

[cwn723]

sweet... im getting better, i took apart a radio/alarm clock and unsoldered some stuff, then soldered it back together and... it works!!

EDIT: sweeeeet!!! i just was outside soldering an old hard drive, im getting alot better.

im going to buy the stuff for the sound mod, and see if i can solder the stuff to the ic and the leds before i start soldering onto my mobo. thanks for everyone who helped!

[dennisrr]

Didn't even practice for my trigger mod.
Failed a few times but after a while I got it workin.
But if you wanna get it on the first try or somn then yeah, guess someone would need some practice.

[cwn723]

yeah.... i think ive had enough practice.... im going to put either 6 or 8 leds in my psp, or is that toooo much? im going to tape everything off for no shortcurcuit, also.