Author Topic: metal faceplate?? (psp slim) (Read 27473 times)

lookkool3 · « **on:** February 14, 2008, 06:14:15 PM »

i need some one to make me a metal face plate and back plate for a psp slim cause every time i get a new system and play it too much my mom breaks it she broke my xboxs i got two xboxs for x-mas and she broke both i only had them for 4 months my dad broke my computer just cuz he was mad at me and my last slim got smashed by my mom...so if some one can get me a metal faceplate ill pay you watever it cost you to make it just be reasonable with the price

i22foosh · « **Reply #1 on:** February 14, 2008, 07:11:03 PM »

NEMESIS HERE TAKING UP ON WHAT TDX DONE:
the amount of spam posts you make in NON-SPAM areas are unbelievable seriously. there is no need for posts such as these so either cut the act or dont post at all simple as. any further spam posts on psp slim board i will make sure to delete

TDX Supporting Bretheren:

To let you know administrators have been informed of your actions and you will face a ban soon enough.

I22 Foosh here:

Ive stopped spamming, so guys just calm the

down... Sorry. I have a semi-foul mouth. I was warned by mod by message already, so i know now.

Canadajames · « **Reply #2 on:** February 15, 2008, 09:01:06 AM »

you want an actual milled metal faceplate and backplate?

lookkool3 · « **Reply #3 on:** February 18, 2008, 04:48:27 PM »

yea thats what i need a metal face and back plate that wont bend or crack if you hit it with a hammer

4dP · « **Reply #4 on:** February 18, 2008, 10:57:24 PM »

as far as i know there is no metal faceplate and i dont think anyone will waste the time developing one

ryan0 · « **Reply #5 on:** February 19, 2008, 07:05:05 AM »

you could get one cnc machined,just get a 3d model file of a psp faceplate and BAM you can make ya'llself a faceplate.....well u cant but u can have it machined...which costs good money

Canadajames · « **Reply #6 on:** February 19, 2008, 12:45:07 PM »

actually besides that not being a ton of money you could make a mold out of an existing psp case then fill it with liquid hot metal. and crack it out. But then theres the money.

. I would just but a nice case made of metal with a lock and bubble rap.

lookkool3 · « **Reply #7 on:** February 20, 2008, 09:11:56 AM »

ok i kinda get it its hard and expensive

so wat about a reinforced face plate like maybe put little sheet metal plates on the inside of the face plate, sort of like triming and patching the weak parts of face plate wait it doesnt have to be molten metal wat about a sheet metal plate the size of the face plate and bend it into shape then weld all the little parts like the holes for the screws and stuff

if some one knows how to make the mold to put the molten metal in tell me maybe i can do it myself i just need to know how

edit:

Quote from: edhel on February 20, 2008, 08:58:43 AM

yeh im sure that will happen, steel is essentially the same as plastic

steel aint one bit like plastic but dosent plastic burn when its hot i dont get how the make the plastic face plates even if some company does make the plates their going to sell them for more then the psp are worth alone

seikene · « **Reply #8 on:** February 21, 2008, 10:43:47 AM »

I lol'ed at that for a minute. Anyway it's like Ryan said. Unless you can get a Cnc'ed faceplate, or else get a program like Rhino 3D and make one, then get a millimachine ( forgot how to spell it, dont sue me :P) and make it, then you're pretty boned, mate. If anything I suggest hiding the stuff or try to make a case for your psp, like one made outta nerf, I know there's one for the DS and that thing can seriously hold a beating.

lookkool3 · « **Reply #9 on:** February 21, 2008, 05:12:33 PM »

Quote from: seikene on February 21, 2008, 10:43:47 AM

I lol'ed at that for a minute. Anyway it's like Ryan said. Unless you can get a Cnc'ed faceplate, or else get a program like Rhino 3D and make one, then get a millimachine ( forgot how to spell it, dont sue me :P) and make it, then you're pretty boned, mate. If anything I suggest hiding the stuff or try to make a case for your psp, like one made outta nerf, I know there's one for the DS and that thing can seriously hold a beating.

nerf!!?? sounds good enuff but isn't that more like a case then a face plate?

is that stuff about makeing money for visiting sites true??

kow777 · « **Reply #10 on:** February 22, 2008, 03:25:26 PM »

carry your psp with you so your mom doesn't get it
do your parents buy you your consoles?
if they do i think your parents need to think before they do stuff

lookkool3 · « **Reply #11 on:** February 24, 2008, 04:56:44 PM »

i do carry it with me everywhere i go

.... the xbox and the computer my parents bought and broke my first slim i bought with my own money, and my mom broke it

this is my second one and im trying to make sure that dosent happen again...

i22foosh · « **Reply #12 on:** February 24, 2008, 06:05:26 PM »

Dude just keep it away from her i think thats your best choice

Tri-edge · « **Reply #13 on:** February 24, 2008, 09:38:39 PM »

Ok I know that this is not a metal faceplate but its a good alternative
http://cgi.ebay.com/SILVER-Premium-Metal-Case-Skin-Cover-for-Sony-PSP-SLIM_W0QQitemZ310024635630QQihZ021QQcategoryZ122516QQssPageNameZWDVWQQrdZ1QQcmdZViewItem
I found a couple of them on ebay, so it may not be the cheapest one.

Sil3ntP3nguin · « **Reply #14 on:** February 25, 2008, 02:06:05 AM »

the faceplate wont cost much to make. the only thing thats ahrd to do is the rivets of the underside of the faceplate. like where the screws go in. that is pretty much the only problem with making a custom faceplate. it would only cost you about $500 for stainless steel...

Nemesis · « **Reply #15 on:** February 25, 2008, 05:00:08 AM »

all spam posts removed, luckily this was not but members please keep away from spamming out of the spam & chat section

thanks

lookkool3 · « **Reply #16 on:** February 25, 2008, 12:36:37 PM »

Quote from: dslitemodder on February 24, 2008, 09:38:39 PM

Ok I know that this is not a metal faceplate but its a good alternative
http://cgi.ebay.com/SILVER-Premium-Metal-Case-Skin-Cover-for-Sony-PSP-SLIM_W0QQitemZ310024635630QQihZ021QQcategoryZ122516QQssPageNameZWDVWQQrdZ1QQcmdZViewItem
I found a couple of them on ebay, so it may not be the cheapest one.

this is pretty good but i think it'll still break if she hits it with a hammer

EDIT:

Quote from: Sil3ntP3nguin on February 25, 2008, 02:06:05 AM

the faceplate wont cost much to make. the only thing thats ahrd to do is the rivets of the underside of the faceplate. like where the screws go in. that is pretty much the only problem with making a custom faceplate. it would only cost you about $500 for stainless steel...

thats alot $500

i might as well just buy a new psp if she breaks it

but what if u make the holes for the screws bigger wont that be easiesr to make and wont it make it cheaper

XXXXXX · « **Reply #17 on:** February 28, 2008, 08:29:24 PM »

What kinda hammer does your mom use???

i'm guessing if you have steel case on the screen you won't be able to play on it anymore. The screen is the most vulnerable spot so u have three choices to make
1. have a metal case that opens to play
2. have a metal faceplate covering the screen too (will work only if you mom uses a small hammer not a 20 lb. hammer)
3. get rid of your mom

lookkool3 · « **Reply #18 on:** February 29, 2008, 09:13:21 AM »

it depends how mad she is when she broke my xboxs she thru them down the stairscase then she took them out side and used the hammer

it was carpenter hammer those basic metal hammer you know? the first psp slim i had she smashed it against the fridge and then she took it to the garage and smashed wat was left with a hammer and my dad he stomped the viruises out of my computer he was mad at me

for no reason and he took out his anger on my computer he kicked it thru it around it was pretty crazy i bet i could have fixed it but he took the mobo and the screen so i couldn't even try now im at his work useing his company computers he cant smash these

you know for the screen it would be nice to have like a thick glass like bullet proof glass

from cars so if she did hit it and smash it around only stuff that could break is the mobo and the chips and inside

so this psp would be bullet proof but not bomb proff only way she so could break it would be to blow it up but that would cost hella money to make a bullet proof psp

cobain93 · « **Reply #19 on:** February 29, 2008, 01:24:27 PM »

yo no offence but you're mom is a crazy biatch..... and if i waz you i'd just hide it in a metal chest with a pad lock when its not in use. then when it is in use id make sure she was no where near me... but ya ur parents got issues...

XXXXXX · « **Reply #20 on:** February 29, 2008, 03:06:56 PM »

you should get yourself one of these small safes and somehow weld/glue the safe to the floor so your mom wouldn't throw the whole thing in the garbage.

lookkool3 · « **Reply #21 on:** February 29, 2008, 05:10:47 PM »

Quote from: XXXXXX on February 29, 2008, 03:06:56 PM

you should get yourself one of these small safes and somehow weld/glue the safe to the floor so your mom wouldn't throw the whole thing in the garbage.

i thought about getting a safe before but thats kinda expensive

im not so worried anymore about her breaking it cause she's kinda calming down she's not as crazy as before

EDIT:

Quote from: cobain93 on February 29, 2008, 01:24:27 PM

yo no offence but you're mom is a crazy biatch.....

ya she is sometimes, but who cares, im still alvie!

Nemesis: don't double post, use the button

Luke · « **Reply #22 on:** March 08, 2008, 02:45:33 AM »

safes arnt that expennsive i can get one that could at least fit 50 psp's for $50 at my local hardware shop

feeble-psp · « **Reply #23 on:** March 13, 2008, 12:58:20 PM »

your not serious that your mom and dad really do that i find it hard to belive they must have money to burn if they do i cant bevise that an adult could have so little respect for things that are so expensive how many £1000's have they wasted smashing your consules and that bit about throwing your xbox down the stairs and then smashing it with a hammer dosunt seem real seems like somthing of smashmystuff.com

lookkool3 · « **Reply #24 on:** March 19, 2008, 02:34:47 PM »

idk what you mean

Quote from: feeble-psp on March 13, 2008, 12:58:20 PM

that bit about throwing your xbox down the stairs and then smashing it with a hammer dosunt seem real seems like somthing of smashmystuff.com

but it's true she really did throw it down the stairs...she thought it would crack open like an egg or sumthing but all i remember is that the little thing that sticks out when you eject a cd from the xbox it came out somehow and snaped off and the rest of the stuff was fine thats why she got...well she didnt get a hammer first she got a stool from the kitchen and smashed it with that a few times then i was crying my eyes out

and she left to get the other one and did the same thing i didn't know wheather to save the smashed one or to try and get the other one away from her so i just grabed the smashed up one ran to the garage she ran after me and took from me and that where she got the hammer and used the part of the hammer you pull out nails with and destroyed the rest of it from there there was a few parts that where still good so i took that one to my friends house he lived a few houses down the street and when i came back i found the other one in the garbage already smashed up the green circle on top was smashed in other then that it looked ok so i took that one to his house too then i was just picking up other stuff that came off the xbox like the whole entire front section where the buttons are that came off from the first one it look ok but the wire part that connects it to the xbox was ripped off and that kinda made that part useless they both had something really important broken off there was the xbox that didn't have the plate with the buttons cuz it got riped off and the other xbox got the top smashed in to the hard drive something like that i dont really remember this happened like when i was in 8th grade im 11th now so that was like two or three years ago well anyway a few days later i went to my friends house to see if we could save one if we could use parts from both of them to rebuild one but we didnt know

about moding or electronics so i tryed to sell them to this short fat kid that lived a block over from where we lived he only knew where i lived so i took the xboxs back to my house and he meet me over at my house to pick them up i was trying to get him to give me 40 dollars for the both of em but when i was giving him the xboxs my mom saw that i still had them so she got her hammer again and smashed them up right in front of us i told that stupid fat kid to take them and run but what do you expect he lives a block away and he cant run for crap he got scared when he saw my mom smashing them up so he just kinda took off empty handed and there i was again watching my mom finish off the xboxs this was the first console my mom broke well first two actually then she broke my psp and after that my dad broke my computer the psp i bought with my money the computer was a birthday present from my mom but i think my dad bought it the xboxs where both christamas presents one from my mom and the other from my cousin now all i got is a psp

this is the longest i ever had a videogame console that i bought with my own money and hasn't goten smashed

pspcracker · « **Reply #25 on:** March 19, 2008, 06:22:52 PM »

dude get a small safe and bubble rape it in the inside and pad it up in the in side and put all of your stuff that u do not want to get SMASH

lookkool3 · « **Reply #26 on:** March 20, 2008, 09:23:01 PM »

i would get a safe but it's cheaper to hide stuff in the air vents and in my jeans in the closet nobody looks there

cobain93 · « **Reply #27 on:** March 22, 2008, 02:04:14 PM »

a metal faceplate, i'd call the damn cops, if thats what they'er doing to your consoles i can only imagine what their doing to you..... dude your parents have serious issues... wtf did you do to get them soo enraged that they thought the only fair punishment was to destroy your consoles and cpu????

ra1n · « **Reply #28 on:** March 22, 2008, 06:31:01 PM »

What did you do to make them that mad? I guess it wasn't that mad i had a friend in 6th grade his mom got so mad she threw his ps2 though a window from the 2nd floor because he didn't want to be the alter boy at church, I did that smart thing by backing away slowly and went home.

lookkool3 · « **Reply #29 on:** March 22, 2008, 10:30:42 PM »

Quote from: cobain93 on March 22, 2008, 02:04:14 PM

a metal faceplate, i'd call the damn cops, if thats what they'er doing to your consoles i can only imagine what their doing to you..... dude your parents have serious issues... wtf did you do to get them soo enraged that they thought the only fair punishment was to destroy your consoles and cpu????

i never did anything to them it's cuz i always had bad grades and my mom blamed my video games

saying that i never did my homework and stuff like that which was kinda true but it wasn't the home work it was the test that they gave me at school if i

up the test my whole grade went down the drain but any way, that day my mom broke my xbox it was just cuz i didn't want to fold some towels and she was already kinda mad at my sisters for something so thats all it took for her to take her anger out on my xboxs when she broke my psp (the first slim i had) i was playing at the table in the kitchen and she was cooking something and when i put the psp down just to get something i forgot what i was going to get or why i put it down

but when i put it down she snatched it

and said i was only going to get it back on the weekends but i didn't want to wait so i was begging for her to give it back

... (BTW this happened like around january this year) ... well i was there begging and begging and a few minutes later she said if i didn't calm down she was going to break it and i said i dont care i'll just buy another one

and she said oh yeah we'll see about that... like i said we were in the kitchen and the fridge was right next to us so she banged it up on the side corner of fridge a few times i dont know

exactly what happened to the psp

but i do remember that the memory stick and the game inside poped out and i picked them up when they hit the floor

the rest of the psp broke in to some smaller pieces and i picked those up to idk know why

but i did

... the main chunk of the psp was still in my moms hand she didn't even smash it up that bad so she went to the garage and got the hammer this time it was more planned out i could tell she was already planning to break it cuz she new exactly where the hammer was... when she broke the xboxs she was asking me where the hammer was, like if i was going to tell her, well anyway... i followed her to the garage and i wanted to snatch the psp of the table where she was about to smash it

but she was like go ahead stick your hand in there see what happens so i held back and grabed watever flew off the psp every time the hammer hit it, after she was done i dont remember what happened to the rest of the psp

but i do remeber that i was picking up little parts that didnt look completely

up... the weirdest thing was that the umd door was still in the kitchen in one piece it was so perfect and shiny like a brand new psp

but it was just the little door... i saved the parts that i could in a little plastic bag i just that i forgot if i thru it away or if i hid it somewhere

that makes me hella mad

cuz i found this site and i could have used that umd door or the trigger that i had to have a back up if i mest up on something ... oh yeah when my dad broke my cpu it was the stupidest reason well actually i dont think he even had a reason he was just mad ... i was takeing a shower and everyone was waiting for me cuz we were going to a reasturant and my dad was just out side the bathroom rushing me he was like hurry the

up you take forever blah blah he was saying this in spanish ... i was already done takeing a shower, i was getting dressed and i was trying to tell him to just go and i would stay home and eat something but he was like no your not staying all you want to do is play your stupid computer and i think thats when the idea struck him

he threatened me by saying he was going to break the computer if i didn't get out i was telling him hang on i'll be out in second and he didn't wait he just went to my room while i was still in the bathroom getting dressed and all i heard was a bunch of crashing and smashing stuff it was kinda scarying

cuz i knew if i got out of the bathroom he would probably take off his belt and start whooping me with it so i just waited till he was done and when i got out there it was all smashed up my mom came up stairs and said what happened and was like what do you think theres a smashed up computer infront of us and an angry

guy down stairs she said just forget you can clean it up later so when we got to the resturant he didn't even have a

reservation and i felt like rubbing it in his face saying wtf!

all the rush and you aint even got a reservation!! but my mom kinda tryed to stop me she was like dont push him so i keept quiet and after like 15 minutes we got our food ate then went home but on our way to the car i dont remember what happened but my mom and dad got mad at me for something and they kicked me out the car and said walk home i was kool with dat cuz i was hella full but i didn't want to go home and i didn't have anywhere else to go (BTW my house was like 5 blocks from the resturant wasn't very far) so i went to the park walk thru this one trail that leads to another city then i was walking around some weird neighboorhood then thru this residential area and i got a little lost for a while but i was like what the hell nothing matters now so i kept walking then eventually i figured out where i was and i followed the train tracks north and i got home really fast it was faster then walker thru the streets when i got home my mom was asking me where i was and she said my dad went to go look for me and said i was just walking around ... when i got to my room i found the keyboard the mouse and a whole bunch of little plastic parts that didnt even look like they belong to the computer the plastic frame that goes on the lcd screen was broken the screen looked fine the monitor the box watever you call that thing it was all bent and stuff i got a pic of the computer

i think my dad was stomping on it cuz thats the only way it would have ended up like this...

EDIT:

Quote from: RA1N on March 22, 2008, 06:31:01 PM

What did you do to make them that mad? I guess it wasn't that mad i had a friend in 6th grade his mom got so mad she threw his ps2 though a window from the 2nd floor because he didn't want to be the alter boy at church, I did that smart thing by backing away slowly and went home.

at least that kids mom didn't go after the ps2 with a hammer

... you could have backed away out of the room and take the ps2 so his mom would go after it then give it to your friend later

but it's alittle late for that now..

Nemesis: Dude stop double posting, modify your first post by using the edit button.

cobain93 · « **Reply #30 on:** March 23, 2008, 04:35:15 PM »

wow.... your parents still have issues.... you should like wright a book when your older about all this crap and name it "a million little peices"

lol......

lookkool3 · « **Reply #31 on:** March 24, 2008, 10:31:20 PM »

Quote from: cobain93 on March 23, 2008, 04:35:15 PM

wow.... your parents still have issues.... you should like wright a book when your older about all this crap and name it "a million little peices" lol......

lol thats a good idea but i think it might be a really short book

cobain93 · « **Reply #32 on:** March 26, 2008, 04:37:43 PM »

lol you get the joke tho right??? the joke is that "a million little peices" is a real book that was a lie.... lol im not saying your lieing but imma lil skepticall....

lookkool3 · « **Reply #33 on:** March 29, 2008, 04:10:58 PM »

Quote from: cobain93 on March 26, 2008, 04:37:43 PM

lol you get the joke tho right??? the joke is that "a million little peices" is a real book that was a lie.... lol im not saying your lieing but imma lil skepticall....

i get it now

... i dont blame you for thinking that i was lieing it was just such a long time ago that the details are kinda sketching but watever the past is the past i rather just forget about it

btw i think this fourm is almost dead

MattZani · « **Reply #34 on:** March 29, 2008, 05:56:11 PM »

Seems you dont need a metal PSP, just a social services person for your parents.

nez · « **Reply #35 on:** March 29, 2008, 10:32:28 PM »

lol true.

Man i would just keep my mouth closed and do what they say. who knows what will be next to break.

.
and like with the shower issue i would have walked out how i was when your dad sayed lets go.

man you should make a cast your face plate using um that pudy stuff that hardens then get thin piece of metal or a pan and cut out the bottom or the side. believe me it is good to use. just use a pan your mom doesn't use.
i had to mold a cover for a chain for my goatcart so i used a pan my mom never used that thing held up with all the curb sliding bolder hitting abuse and was still in good shape. plus it was shinny. if it can hold up to hitting a bolder at 45 + mph then it can handle a hammer. it is also easy to bend with your fingers and a hammer and pliers. cut wood to the shape of the face plate curves or take the puddy mold and pore concrete over it to make a mold where you smash the hammer on the metal down to the inlayed mold in the concrete block. and you will get the face plate it works just heat up the metal with a burner to make it easier to mold and hit in rhythm it helps the metal shape faster and cleaner plus helps on the stress on your arms. Learn the rhythm of the metal don't hit on the back wave it is like hitting concrete.

If you do the wood make a cut of the angles and use the piece you cut out that is shaped like a wedge wrap it up in tape duck tape with paper towel on top then duck tape to stop the wood from splitting and hit the wedge on the metal to the shape you cut out and it should go right in place.

any way you do it you may have four corners with a little gap put solder had heat it up then file it to match.
done.

it is not hard just time consuming.

i have done a lot with metal and pans

lookkool3 · « **Reply #36 on:** April 01, 2008, 10:32:23 AM »

wow i think your the only person that actually knows how to do this

i kinda get what your saying but i got a few questions

- what kind of metal should i use to melt in the pan
- are you talking about the pudy that was on T.V. and when you squish it together it activates and later drys up and gets really hard
- what do you mean hit it with the hammer but dont hit on the back wave
- are you saying melt the pan or use the pan to hold the melting metal

other then those few things i dont get i think i can do this

nez · « **Reply #37 on:** April 01, 2008, 10:20:56 PM »

Well use the pan metal not melt the metal in the pan. cant be done. metal has to get so hot that i reqoirs you go have a huge burner or a special contraption that pump out 1000 or so degrees constantly.it is so hot you use soda ash.as the charcoal. but the pan is already heated chromed and is easily bendable by hand and hammer.
cut up the pan
cut wood to the shape of the angles
use the wed of the wood cuts put paper tolls on the top then wrap all in duck tap
use wedge to bend metal in to the wood you cut
heat wood as much as you can to make easier to bend
hit with hammer in a rythym, clan ..clank..clank.keep even beat pattern. (if you stray you can make your wrist hurt and not much effect to bending shaping mettle)
Think sound wave a solid wave is better then a mixed wave.

sheat metal will work too if you dont want to cut your moms pan up.

the mettle that you can melt is to brittle. so you need to work with sheat metal and do the old fashion way of beat and smash to shape. get newspaper to to hold the hot metal.

if you want to make the concrete mold then you just need puddly play do that is used for art. it needs to get hard to make the shape of the face plate .
bucket to port concrete in
place mold of face plate with hanger through the top so you can pull it out latter in concrete on bucket.
let dry then remove the plaster puddy mold.
place metal (pan or sheet metal) on top of concrete.
get a piece of wood or something taped to hit down on metal to fit in mold
then hit away you may have to do some cuts to make some bends corner's more likely.
and bent a little by hand and foot.
get a stack of news paper to hit down on when you are making some bends with out the mold or wood. it kinda shapes to how you are hitting.

I use metal working tools like a special hammers that have diff bends angls on the head to shape the metal and steel hand molds of angles to beat in to.(so the wood that you tape very tight and thick will do the same thing.)

They were used wen my grand father restored model T cars and classics..
great for metal fabrication.

so use force safety brains and determination.

it is not hard to do just get to it.

make the wood molds soke in water to swell it and strengthened it. If you do study you will find that soildrs that used wood shealds put them in water to give strength. then wrap in duck tape to hold it to gather very tighly and thick. cheaper then leather. you could do is make a leather pillow filled with paper lots of paper . used to shape.

note the top and bottom angles are the sam.indents were the trigers ans power are. one mold for all four indents one for the top and one for the botton curve then one for the left and rith side..

to get the metal to bend at the triger and power cut two cuts on both side wide because it will shrink or bend then cut the crease.or to make it stronger and to protect the trigers do the top trim sold across hidding the trigers and fold metal back to the back side. to finish it.

Oh a little not the top tabs will need to be longer then the botton to go the depth of the top and go don the back make very long you can cut to size after all bent.
it will not effect you playing your fingers push the back side of the trigers most of the time and donrt touch the front..
battery cover is the easy est to do umd dore harder tight curves. screw driver tip to shape the metal around .
well good luck have fun doing it need help just ask.

teepee · « **Reply #38 on:** May 05, 2008, 08:21:27 PM »

says it's a platinum replacement case. looks like it could be metal. hard to say though. http://damodfather.com/catalog.php?item=42

ApheX · « **Reply #39 on:** May 06, 2008, 05:21:19 AM »

i think thats a normal faceplate.

VoX · « **Reply #40 on:** May 06, 2008, 05:36:51 AM »

Dude, Get Social Services on their ass, If your mum went all the way to smashing both your Xbox's then I think she'll find some way to smash your new PSP too, even if it is in a bulletproof Safe. Or you could ask you Mum to have a talk about what she's doing

Cautionhead · « **Reply #41 on:** May 07, 2008, 09:17:01 PM »

I'm being serious, you need to call a Social Service officer or talk to your school consoler! This isn't just some thing you can brush off, your parents have sever anger issues. You're not going to however, because you just don't have the guts/scared. At least thats what I'm getting from your posts. Also, it's illegal for your parents to break things that you have bought with your own money or what has been given to you. I know from experience... seriously, if you're not going to tell your school counselor whats been happening, contemplate getting some help if this happens again.

nez · « **Reply #42 on:** May 07, 2008, 11:55:00 PM »

like everyone said we are not taking this litely this is very serious. There is one pet peav of mine and that is abuse taken lightly. their are many forms of it all just as equaly bad. go and get help dont stay in the situation it wiil only harm you. dont be afraid nothing will happen to you it will only help you. you dont deserve this type of treatment you are worthy of much better. get some balls, take your bullocks by the horns do something. i will say this again nothing will happen to you.

ApheX · « **Reply #43 on:** May 08, 2008, 12:35:14 AM »

Not to jump on the band wagon on nothink, but these guy are right. no one should put up with thast sort of

! how do you think it will affect you later if all you have to deal with is phsyco people like that. you need you get help, or at least speak to someone you trust about this.

tripsalot · « **Reply #44 on:** May 09, 2008, 08:12:10 AM »

wow dude you folks sound like winners.but anyway have you concidered makeing your own faceplate out of epoxy?

ApheX · « **Reply #45 on:** May 09, 2008, 11:43:53 AM »

Quote from: tripsalot on May 09, 2008, 08:12:10 AM

wow dude you folks sound like winners.but anyway have you concidered makeing your own faceplate out of epoxy?

Never tried it. not sure if i have the skill to pull that off, lol! end up with some frankinstine faceplate that no one loves and fears.

lookkool3 · « **Reply #46 on:** June 25, 2008, 10:13:36 PM »

wow i haven't look at this thread in a long time

hey gameking, i'm not so sure i can get a fire to burn at 1000 degrees

and tripsalot what's epoxy?

and you people that say i should do something about my parents do you got any better ideas that dont involve another person? cause laws wont stop them and "talking to someone i trust might not really change much either

bustinthejustin · « **Reply #47 on:** June 26, 2008, 10:00:27 AM »

Why the hell wouldn't u want the law to help you? It's not like you can pull an AK-47 out your ass and kill them. Either that or run away from home and never come back....

K4P741N KRUNCH · « **Reply #48 on:** June 27, 2008, 12:58:43 PM »

Yeah dood I moved from my parents in MA to live in CT with my boss from work when I was 16

Sgt Lovin · « **Reply #49 on:** June 27, 2008, 03:20:19 PM »

Hmm, i think my dad might be able to do this as he is very good at cutting things to size, heck he made a small trailer for our 3 ATV's just by using materials and welding and cutting, he has no machines that create shapes but he can use grinders and stuff as well as welding to do but it won't come out perfect, though he is very good at it and should be able to do a good job.

so what i was thinking, making a case for the psp, which will be quite easy as the slim doesn't have any lumps on the backplate, the only things that will be left open to keep use are the UMD door, triggers, buttons, analog, homebar buttons, ect...

if you think about it on how this will all come out, think of it like this, your adding armor to the PSP, to hold the damn thing in place would be a problem if the metal shaping isn't exactly the same as this can damage as well when its in there. Or you if you don't care much about the case anymore, you can just use the best glue out their to add this "armor" to your PSP, look for it at the home depot or any other places that you can think of that sells glue, it's called Gorilla Glue, this is more than likely stronger than crazy glue (has a warning and caution add on the bottle, trust me you don't wanna get this stuff on you as it makes your skin dry and makes it hard to peel of the skin as well), but that is the only way to keep your PSP intact without much $$$$

and about your parents, same thing for me, my parents aren't that bad but can get as agressive s yours, my dad threatened to shatter both my 2 PSP's and my Xbox 360 if i kept playing more than 5 or so hours a day, whatever your parents say u must do, but if it gets out of hand, ur best bet is to live with some of your other family members, or just put up with the sh*t they gave you like i do.

hope it gets better

the only thing left that would be damagable would be the screen, but if u weren't gonna open the PSP would be very easy, but i know u still wuld want that.

so we drill holes for all the

bustinthejustin · « **Reply #50 on:** June 27, 2008, 09:55:36 PM »

The worst punishment my parents have ever given me for playing to much video games in a suspension from them... Damn that sucks though, it's like withdrawl from drugs when you're that addicted.

lookkool3 · « **Reply #51 on:** June 30, 2008, 11:41:40 AM »

i guess the metal face plate is a little out there but it doesn't really matter because both my slim and phat PSPs are both broken i was trying the LED mod and mest up my slim and my friend droped it and yea well my phat needs new mobo
both are for sale

pm for details

i just bought a 360 and i was thinking of putting it inside the big screen TV cause it's not a flat screen i can open it up and stick the 360 in there and if my mom gets mad at me for playing she'll have to calm down take off the screws from the tv to get to the xbox or she could smash up the entire TV which im pretty sure she wont

jake the noob · « **Reply #52 on:** July 01, 2008, 08:57:00 AM »

wow..guys i have never been punished for playing too much video games i bought my psp slim (star wars package) the day it came out (didnt even go to school so i could get it before sold out)i bought it with my own money but my dad has never gotten mad at me for playing it too much or smtin like that.but seriously dude you got some crazy parents. no person in there right mind would smash smtin like that.not because its a glorious incredable peice of hardware but just cuz it cost like a easy $200.00-$250.00 and if they bought it for you i cant understand why they would break it.and with all you guys telling him to tell the school pysch that prolly wont work cuz they are not doing anything wrong.(in a leagal sence) all parents have the right to hit there kids with a open hand.(the right to maintain disiplain in the home)they can break all the stuff they want none of witch is illegal.if this even did go to court the judge prolly would not really think of this like you guys do because most adults dont like video games anyway let alone the whole concept of them....but yea i would appreaciate checking out my other post and adding any thoughts you might have.....search:plz help me give me a break..

lookkool3 · « **Reply #53 on:** July 04, 2008, 02:42:51 PM »

it's a miracle...i was playing the 360 and my mom saw me playing and she didn't get mad or anything she was just looking at me like hmm and then she walked away and my dads about to get me a ps3 and my sisters are geting ps3's too

it's like all of a sudden my life dosen't suck anymore

MidKnight · « **Reply #54 on:** July 05, 2008, 11:23:18 AM »

hmm... how about aircraft-grade aluminum?

psppunk · « **Reply #55 on:** July 09, 2008, 12:41:16 AM »

wow, they smash your stuff and you haven't beat the living

out of them?!
you a pacifist? cause it doesn't seem like thats working for you too well...

anyway, if you want to (legally) do something about it, set up hidden cameras(WITH AUDIO!) in your house all routed to a central computer that records everything, then when you have at least 3 incidents, call the authorities (apparently social services)

btw you need to have the computer constantly recording new video and deleting video thats over a week or so old and every time there is an incident, remember what time it happened, then save that clip of video elsewhere the next time you can (before it gets deleted by your comp)

its a pretty hard set up, but if you've got about an hour to yourself in the house, you should be able to do it
i did it and its come in quite handy (not for anything like you've gone through though)

lookkool3 · « **Reply #56 on:** July 15, 2008, 10:03:03 PM »

sounds good just tell where can i get some cameras like that i might need a big set i have a pretty big house

News:

Author Topic: metal faceplate?? (psp slim) (Read 27473 times)

VoX