Author Topic: Power sources/Resistors  (Read 1347 times)

Offline dennisrr

  • ½ Pint
  • *
  • Posts: 31
  • Post quality +0/-0
  • Gender: Male
  • Modder
Power sources/Resistors
« on: February 15, 2008, 02:46:18 AM »
I'm askin for a picture of all the power sources that can be used on the PSP for LED's.
And if possible any information on using resistors with LED's. It might be too much to ask but please help me out.
Trigger mod to hold switch.
Current status:ACHIEVED

Attempting face button mod
Current status:No Progress

Offline [HoP]

  • Ex-AcidMag
  • Granny Spanker
  • *
  • Posts: 361
  • Post quality +9/-3
  • Gender: Male
Re: Power sources/Resistors
« Reply #1 on: February 15, 2008, 11:51:15 AM »
for power positions... look in the tutorials or the wiki???

for LED + RESISTANCE CALCULATIONS...

go here:
http://ledcalc.com/

i have pics of possible power locations, the easiest is the bottom of the mobo or the power board...

Click to Enlarge:
:::ON MOTHERBOARD:::



:::ON POWERBOARD:::


**When soldering to the motherboard remember that there are parts that sit against the mobo once the psp is together, i recommend routing the wires up from that location if it is decided to use that location

Offline whitetop

  • E = MC² Mad Scientist
  • *
  • Posts: 1910
  • Post quality +39/-12
  • Gender: Male
  • im not in the ass kissing team
Re: Power sources/Resistors
« Reply #2 on: February 15, 2008, 12:03:37 PM »
thx i needed this as well
come to the rite place if you kiss admins as they promote you to admin.

Offline dennisrr

  • ½ Pint
  • *
  • Posts: 31
  • Post quality +0/-0
  • Gender: Male
  • Modder
Re: Power sources/Resistors
« Reply #3 on: February 15, 2008, 04:08:06 PM »
Thanks bro. So from what I know now you can have 6 LED's from the ones you provided plus hold switch activated LED's. Thanks a lot man.
Trigger mod to hold switch.
Current status:ACHIEVED

Attempting face button mod
Current status:No Progress

 

SMF spam blocked by CleanTalk
SimplePortal 2.3.5 © 2008-2012, SimplePortal