Author Topic: Question on LED trigger sound mod  (Read 1527 times)

Offline DUKE

  • King of the Wii-tards
  • *
  • Posts: 194
  • Post quality +0/-0
  • Gender: Male
Question on LED trigger sound mod
« on: February 21, 2008, 04:51:40 PM »
Ok i have been studing the tut the best i could and i had a couple of questions, First off i wanted to wire the LED trigger sound mod to my hold switch so it could be turned on and off so i made this blueprint if you want to call it that and i wondered if i did it right or if it would work...

I connected the negative wires from the leds to the negative of the hold switch like in the led hold switch mod, instead of attaching the negative's to the blue ground




I used these pics to guide me

And where are the postitive and negitive spots on the speakers, if someone could point them out on here it would be great.



If any one could guide me it would be great, thanks in advanced

Offline cwn723

  • Granny Spanker
  • *
  • Posts: 430
  • Post quality +0/-0
  • Gender: Male
Re: Question on LED trigger sound mod
« Reply #1 on: February 21, 2008, 05:09:26 PM »
are those pics indicating the original ground and power source for the sound mod?

wait... psp phat or slim?

Offline DUKE

  • King of the Wii-tards
  • *
  • Posts: 194
  • Post quality +0/-0
  • Gender: Male
Re: Question on LED trigger sound mod
« Reply #2 on: February 21, 2008, 05:13:34 PM »
yes and psp phat

Offline cwn723

  • Granny Spanker
  • *
  • Posts: 430
  • Post quality +0/-0
  • Gender: Male
Re: Question on LED trigger sound mod
« Reply #3 on: February 21, 2008, 05:38:05 PM »
oh... sry, i thought it was slim, but the speaker terminals are the bloby ones to the left, and up, not sure, might wanna confirm.

Offline DUKE

  • King of the Wii-tards
  • *
  • Posts: 194
  • Post quality +0/-0
  • Gender: Male
Re: Question on LED trigger sound mod
« Reply #4 on: February 22, 2008, 04:50:32 PM »
bump

Offline cwn723

  • Granny Spanker
  • *
  • Posts: 430
  • Post quality +0/-0
  • Gender: Male
Re: Question on LED trigger sound mod
« Reply #5 on: February 22, 2008, 08:09:11 PM »
hey, i got my answer.

on the speaker, there are two wires. the gray is goes to the posotive, and the black is the negative... as of the switch for the sound mod, im not sure, you may have to hook the ground up there also.

 

SMF spam blocked by CleanTalk
SimplePortal 2.3.5 © 2008-2012, SimplePortal