Author Topic: ribbon cable short  (Read 1496 times)

Offline folklord36

  • Research & Development
  • Acid Modder
  • *
  • Posts: 810
  • Post quality +0/-0
  • Gender: Male
ribbon cable short
« on: March 05, 2008, 10:39:28 AM »
psp works but sound and power led dont work.

i rewired my trigger leds because enamel got scraped off and one led would turn on when umd door was shut. so i rewire power up and no poewr led or sound and the leds didnt work
« Last Edit: March 05, 2008, 07:24:52 PM by folklord36 »

Offline DubbleDutch

  • BlietZ Modding
  • Millennium Poster
  • *
  • Posts: 1234
  • Post quality +3/-0
  • Gender: Male


Re: power led wont turn on
« Reply #1 on: March 05, 2008, 12:01:19 PM »



To all of you crying about lag and kicks, remember… when Jesus died, took him 3 days to respawn. Now THAT is lag.

Offline psphacksntips

  • ♪♪♪ Tone deff ♪♪♪
  • *
  • Posts: 69
  • Post quality +0/-0
  • Gender: Male
  • PSPHACKSNTIPS| From originality to insanity....
    • For PSP hacks n tips visit us @ PSPHACKSNTIPS
Re: power led wont turn on
« Reply #2 on: March 05, 2008, 05:14:12 PM »
same as mine i tried to do the led swap
======================
PSPHACKSNTIPS
| From originality to insanity|
======================

Offline folklord36

  • Research & Development
  • Acid Modder
  • *
  • Posts: 810
  • Post quality +0/-0
  • Gender: Male
Re: power led wont turn on
« Reply #3 on: March 05, 2008, 07:18:30 PM »
good lookin out im goin to try this right now

Offline folklord36

  • Research & Development
  • Acid Modder
  • *
  • Posts: 810
  • Post quality +0/-0
  • Gender: Male
Re: ribbon cable short
« Reply #4 on: March 05, 2008, 07:29:48 PM »
well you are 100% right my ribon cable has a burn mark on the 3rd contact from the right i solderd to the mobo at the speaker ports that is weird how the heat travels that far without damagein any thing else (hopefully)

Offline GhoSt

  • Creating Null
  • Around the block
  • *
  • Posts: 2552
  • Post quality +19/-0
  • Gender: Male
  • Null Pointer Exception
Re: ribbon cable short
« Reply #5 on: March 05, 2008, 09:06:08 PM »
u sure ur leds havnt just burnt out, but most likely a short
|Variegation - GhoSt's Final Controller|

|Nothing is deterministic.|

Offline Luke

  • E = MC² Mad Scientist
  • *
  • Posts: 1923
  • Post quality +12/-0
  • Gender: Male
  • ..
Re: ribbon cable short
« Reply #6 on: March 05, 2008, 09:13:27 PM »
short.... did u use resitors? when i did my power led switch i had to put a resitor in there very confusing =\

 

SMF spam blocked by CleanTalk
SimplePortal 2.3.5 © 2008-2012, SimplePortal