Author Topic: PvP's (almost no cost to build) Tilt Sensor for the PSP Analog Port (Read 12638 times)

PvP_LostKnight · « **on:** March 22, 2008, 11:20:59 AM »

Description
basically its the size of a umd disc and will fit into the umd drive (if u remove the drive). there are 4 ports on the board that will be wired to the 4 ports of the analog ports of the psp mobo. to use it just tilt in the direction that you would want to go and itll go depending on how much you tilt it. enjoy.

ITEMS NEEDED

*double sided pcb= 5usd
*ALL parts are free from the sites that i will give you.
*pic programmer

Using a homemade pic programmer found here
http://www.instructables.com/id/ECIGFDGTR5EWT14BNI/

Size Comparison
*will fit into umd drive if umd drive is removed
*around the length, width and height of a umd disc!

Heres the schematic

again special thanks to kerky for helping me with this, it was pretty much horrible but not as horrible as ziggy's relationships... so thanks man.

ill be releasing the code for the pic asap after i get some personal business figured out...

Heres what i used to make it

PIC

DAC

ACCELEROMETER

this is how to get your free components to build an important part of this project: the tilt sensor

How to Get Your Free 8-Bit Microcontroller

Step One: Register at Microchip

https://sample.microchip.com/RegisterStep1.aspx

Step Two: Click on Link below

http://sample.microchip.com/Default.aspx?testCookies=true

*select PIC Microcontrollers

*select PIC16F88

*on the left side there 3 PICs that have small yellow squares, click the squares on all 3 of the PICs

*towards the top right under Sample Cart, click Checkout

*use your common sense and u can walk yourself thru this....

How to Get Your Free Digital Analog Converter

Step One: Register at Microchip

https://sample.microchip.com/RegisterStep1.aspx
*disregard this if you already did it

Step Two: Click on this Link below

http://sample.microchip.com/Default.aspx?testCookies=true

*select Analog/Interface Products

*select MCP4922

*on the left side there 5 DAC that have small yellow squares, click the squares on all 5 of the PICs

*towards the top right under Sample Cart, click Checkout

*use your common sense and u can walk yourself thru this....

How to Get Your Free Accelerometer

Step One: Register at Freescale

https://www.freescale.com/webapp/crcl.ccr_register.framework

Step Two: Click on link below

freescale.com Link

*scroll down to MMA6270QT (2) and click on the grey button that says Sample

*find MMA6270QT and click Sample again

*under Quantity select 2

*click Proceed to checkout

*anything that has * you must answer (cough bullshiit cough)

*click continue

*select Prioity for shipping

*click Place Order

AGAIN IF YOU DONT KNOW WHAT THE SCHEMATICS MEAN, OR WHAT A SCHEMATIC IS- DON'T ATTEMPT THIS MOD!!! ITS PRETTY MUCH AS BASIC AS IT CAN GET WITH THIS DESIGN. ANY QUESTIONS REGARDING WHAT THE SCHEMATIC MEANS WILL BE DELETED SINCE ITS SHOWS THAT YOU DONT KNOW WHAT IT IS. YOU'VE BEEN WARNED

GhoSt · « **Reply #1 on:** March 22, 2008, 01:48:16 PM »

nice work

dis is great may do it if i have the guts to remove my UMD ever again

. Hey and for me its auctualy free cas my dads got heaps of double sided pcb's and a pcb prining machine

and we got all the parts now. Thx Man its good to auctualy see some new mods being realesed by acidmods again

PvP_LostKnight · « **Reply #2 on:** March 22, 2008, 02:36:58 PM »

coming soon tilt sensor for dpad (can be used for any console or handheld)

hdx · « **Reply #3 on:** March 22, 2008, 05:02:55 PM »

I have got one wish - make it open source. It will be cool when someone can help you with this. Also I think it can be good way to understand how DAC and Accelerometer work. I can't wait when you release version for D-Pad.

nez · « **Reply #4 on:** March 22, 2008, 11:55:28 PM »

sweet bro i need to find out my college email address.
i got this error

Quote

Microchip currently only accepts online sample orders from registered business or university email addresses. We currently do not accept orders from generic ISP accounts. Please do one of the following:

I will do it Tuesday when i have class

hdx · « **Reply #5 on:** March 23, 2008, 02:41:55 AM »

I have got e-mail account from my WWW account. I ordered samples without any problems. I think my mail's domain isn't in their database.

stankbot · « **Reply #6 on:** March 24, 2008, 01:17:33 PM »

I am stoked, I have been around picking stuff up for this project today. PvP is my hero

CrkPyro · « **Reply #7 on:** March 25, 2008, 06:34:11 AM »

That picture is from the first revision. anyone attempting to make this on their own should be cautious it is still under development. And there haven't been any prototypes to date. The code is nowhere near done, mostly because of my class load this semester

. I plan on finishing up coding by June, hopefully sooner, but I don't plan on releasing the code for free. This doesn't mean I'm going to charge an arm and a leg for it, just a couple bucks. This is not to be greedy, I feel it is fair that I get compensated for my hard work as I have done all the work for this also it would make it so everyone attempting this wouldn't have to make a pic programmer. Also, not all parts are free, the resistors and capacitors will cost a little bit, but not much. Also if there are enough people interested I may have boards professionally made.

PvP_LostKnight · « **Reply #8 on:** March 25, 2008, 09:33:16 AM »

and thats y i love kerky

stankbot · « **Reply #9 on:** March 25, 2008, 09:56:58 AM »

oh...well, good thing I went out and bought all this stuff since it looks like I might have to feel this one out myself then. Great ideas, not so great execution I guess.

nez · « **Reply #10 on:** March 25, 2008, 11:56:06 AM »

Sweet i will get my parts soon. had to use my school email to get them but i did.

ryan0 · « **Reply #11 on:** March 26, 2008, 02:24:25 PM »

hey pvp wheres the firmware we flash the pic's with,i got all the parts before they introduced the university email only thing,lucky me

:D

nez · « **Reply #12 on:** March 26, 2008, 08:09:46 PM »

well i got the tilt sencors today and ordered all the part. just need the program

nez · « **Reply #13 on:** March 28, 2008, 12:01:27 AM »

well is the project still on or is it dead until

get personal matters taken care of.

plus i was looking at the Accelerometer and it was not what i was exspceting at all but they are neat. only ten hours to receive them after ordering.

CrkPyro · « **Reply #14 on:** March 28, 2008, 07:22:21 AM »

I work on the project when I get time. PvP asked me to do this for him, since I know a lot about electronics and I'm decent at programming microcontrollers. I'm hoping I'll be able to use some aspects of this project on my Sr. Design project next year. I haven't had much motivation to work on this lately though, my programmer I built won't work because something is messed up with my computer's serial port. Maybe I'll throw some rough code together this weekend though just to get things started. If anyone is interested in the process of what the code is going to be doing, I'll share, but the code I write will not be open source (I'm a little possessive of my code plus coding µC's can be a pain in the

).

hdx · « **Reply #15 on:** March 28, 2008, 10:20:22 AM »

CrkPyro, please make it on PvP's hardware. It's almost no cost and I think a lot of people ordered needed parts.

CrkPyro · « **Reply #16 on:** March 28, 2008, 12:12:00 PM »

you don't get it, I made that schematic too. I've done all the work, PvP gave me the idea I also based it off a similar product for 360 controllers. you don't want to make the boards you're gonna use from that one though. It's not finished, but all the parts are gonna stay the same. I don't think PvP told you guys what resistors or capacitors to use either, it says in the data sheet for the accelerometer which ones to use, but I can't think of what they are off the top of my head.

nez · « **Reply #17 on:** March 28, 2008, 12:57:52 PM »

Man i think you should get something for your time. so do charge.

so i need to look at the data sheet to see what resistors or capacitors to use.

Is the pic programmer that you build your self any good for this project and the HDD mod?

CrkPyro · « **Reply #18 on:** March 28, 2008, 01:16:40 PM »

I just looked it up, you can use 1K Ohm resistors and 0.1µF capacitors. these are for a simple low pass filter, so you can use other values if you want, but these will probably work the best.

The programmer I built currently isn't working because my computer is doing something goofy with my serial port. I built a variant of the JDM programmer. If you are going to make a programmer you will most likely need a serial port(Note: serial ports on most laptops will not work you need a serial port that can output at least 8.2V). I haven't seen any plans for a usb programmer, but you can buy them. The specific programmer that I built is here http://www.instructables.com/id/Business-Card-PIC-Programmer/ This programmer will work for every microcontoller that is supported by programming software like winpic, winpic800, icprog and others. It'll work for this project and the HDD mod, but I don't plan on working on the HDD mod at all. I'm simply not that good with filesystems and I feel it'd be too frustrating.

nez · « **Reply #19 on:** March 28, 2008, 01:25:24 PM »

Thanks man i am going to buy them right now plus the stuff for the PIC. Ya that was the PIC i saw that i was going to build. I might go to Frys they are pretty good place and it is fun just going their.
LOL well to bad you are not going to try your hand at the HDD mod. I got to frustrated with it
decided to wait for some one to do it..

alexandercyle · « **Reply #20 on:** May 16, 2008, 01:26:28 PM »

so im broke and thought since this was free i would try any idea on getting the required university email or registered business accounts

ryan0 · « **Reply #21 on:** May 17, 2008, 12:38:55 PM »

i have all the parts for this but not the firmware so i'ma gnna write it myself,give me a month or two cos im going on holidays soon

DuMaMay · « **Reply #22 on:** May 21, 2008, 07:15:14 PM »

i ordered the parts-good

. firmware available??

News:

Author Topic: PvP's (almost no cost to build) Tilt Sensor for the PSP Analog Port (Read 12638 times)

PvP_LostKnight

PvP_LostKnight

PvP_LostKnight