Author Topic: Rapid Fire Method (No Chip) (Read 379832 times)

Blazinkaos · « **Reply #270 on:** August 09, 2008, 02:01:28 AM »

ur welcome..

Ghost In Black · « **Reply #271 on:** August 09, 2008, 05:24:47 PM »

Ok, so there will be a way to use this on newer boards because I have 2 new ones.

tvsecho · « **Reply #272 on:** August 09, 2008, 06:26:42 PM »

what size wire did you use cause i have some and i think its to big???/

Blazinkaos · « **Reply #273 on:** August 09, 2008, 09:55:14 PM »

Most ppl use 30 gauge wire...

wilson08 · « **Reply #274 on:** August 10, 2008, 12:29:25 AM »

Quote from: tvsecho on August 09, 2008, 06:26:42 PM

what size wire did you use cause i have some and i think its to big???/

There is a Detailed Tutorial on Front page... I did'nt use 30gauge - But your wire needs to be thin!

Blazinkaos · « **Reply #275 on:** August 10, 2008, 12:58:30 AM »

yea well 30 gauge with thin insolent

ParadiseEVE · « **Reply #276 on:** August 12, 2008, 07:30:27 AM »

Ok I've tryed this and it worked for about a second but i figured out it was a connection problem. in the process i lost my player 1 LED. my question is as shown in the picture has anyone tryed it with the second grounding location on the board? if so what are your results. thanks alot

Blazinkaos · « **Reply #277 on:** August 12, 2008, 07:35:45 AM »

I havent done the second ground point. But soon will..
How did manage to knock out ur led 1 to much heat or solder.

ParadiseEVE · « **Reply #278 on:** August 12, 2008, 07:59:58 AM »

i was trying to solder to the LED ground with a wire that was way to big (22 gauge) and when i udid what i did the LED came right off. i dont mind not having the LED, even though it bothered me at first but if there is a way to fix it i'll do it. i wanna try the second point because i wont destroy the rest of my controller.

Blazinkaos · « **Reply #279 on:** August 12, 2008, 12:31:59 PM »

Yea get 30 gauge wire works a lot better and also u can fix just get another 0603 LED. Also i was reading on another thread taht it does matter i thought it didnt cuz every time i solder LEDs on they work but they say if u solder it the wrong way like positive negative it wont light up but idk. But you can replace the LED and get smaller wire with thin insolent.

FrankieB4 · « **Reply #280 on:** August 12, 2008, 01:13:20 PM »

Can someone please let me know where the ground is on the led? i cant find it anywhere and have tried to attach to to many different things. Can somone upload a clear photo of where to solder it? Thanks alot!

Blazinkaos · « **Reply #281 on:** August 12, 2008, 06:40:19 PM »

here.....

ParadiseEVE · « **Reply #282 on:** August 12, 2008, 07:18:59 PM »

Blazinkaos have you tryed the second ground point yet?

Blazinkaos · « **Reply #283 on:** August 12, 2008, 07:28:26 PM »

no but i will for u if u want...

ParadiseEVE · « **Reply #284 on:** August 12, 2008, 07:45:12 PM »

it would be greatly appreciated if you could, i never fixed that LED but i dont care. i'll just buy a new controller for regular use, and i'll mod this one. also my Soldering iron is only a 6 watt so its very dificult to solder considering the wires wont heat up for me to add the solder. so im going to get a higher voltage soldering iron and try again and hopefully that other ground works cause i seriously damaged the LED ground.

Blazinkaos · « **Reply #285 on:** August 12, 2008, 07:50:44 PM »

ight man consider it done give a day or so cuz i have to work and all... so yea...and yes 6 watt wont do u any good get a 15-20 watt soldering iron...then u are set and also 30 gauge wire...

FrankieB4 · « **Reply #286 on:** August 12, 2008, 08:37:27 PM »

Blazinkaos,

I have seen that image, i just dont know where exactly to solder the wire, to the left side of the led? or what, i need an exact placement because its not working, and has anyone used the other spot instead of the one near the led? please a quick repsonse would be apreciated

ParadiseEVE · « **Reply #287 on:** August 12, 2008, 09:11:27 PM »

FrankieB4 the ground is on the left of the LED, and thanks Blazinkaos i have no problem waiting i have to work as well so i'll be checking back when i have chance. I'll be sure to get that 15-20 soldering iron and i have the 30 guage wire now. thanks again.

FrankieB4 · « **Reply #288 on:** August 13, 2008, 08:46:55 AM »

Here are the links to the three photos I have taken

Image 1:

Image 2:

Image 3:

Image 4:

This is what I have done so far. When I click in the momentary switch which I got off another xbox 360 controller, nothing happens, but when I pull the right trigger, it fires normal. If I pull the right trigger and the push the momentary switch, nothing fires. I have used a TP19 controller 30 gauge wire and everything. I do not see the problem. Also, I am testing this on halo 3, if thats a problem. P.S. is my soldering to the led ground correct?

staticvoid · « **Reply #289 on:** August 13, 2008, 09:25:19 AM »

the two ground points in the tutorial are both on the same trace meaning there is no difference solder to the easier of the 2.

there are different "old style" controller boards.
-016 works with led ground
-014 will not work with led ground, it will work with rumble(not sure how stable)

if you do a controller please add to this list.

FrankieB4 · « **Reply #290 on:** August 13, 2008, 10:08:05 AM »

Where do I look for 016 or 014?

ParadiseEVE · « **Reply #291 on:** August 13, 2008, 10:19:33 AM »

Quote from: FrankieB4 on August 13, 2008, 10:08:05 AM

Where do I look for 016 or 014?

Yea that what id like to know...

FrankieB4 · « **Reply #292 on:** August 13, 2008, 11:05:37 AM »

Okay, now when I push my switch, it fires, but does not make a pistol in COD4 or Halo shoot super fast, its just like hitting the trigger really fast, which defeats the purpose of rapid fire. It also isnt very solid fire, its broken up somewhat.

PspKicks316 · « **Reply #293 on:** August 13, 2008, 11:11:59 AM »

No one ever said it was super fast rapidfire. Also, Make sure your tact switch pins are wired right. And make sure you're using used batteries, or the PnC pack or else it won't work right.

staticvoid · « **Reply #294 on:** August 13, 2008, 11:27:58 AM »

look under your battery pack for a barcode

Winterz117 · « **Reply #295 on:** August 13, 2008, 11:31:05 AM »

now what if you wanted to use the right trigger for rapid fire? is there a way to make it so that the switch activates or deactivates rapid fire for the right trigger?

FrankieB4 · « **Reply #296 on:** August 13, 2008, 01:47:35 PM »

It works, but mine is just like normal speed, if you used a machine gun in cod4 with the trigger, and then then with my swtich, you would see no difference, or is that normal? and the hand guns in the videos look to shoot super fast, mine with the switch shoots normal speed as if you were pulling the trigger alot.

Blazinkaos · « **Reply #297 on:** August 13, 2008, 02:02:20 PM »

Quote

FrankieB4 the ground is on the left of the LED, and thanks Blazinkaos i have no problem waiting i have to work as well so i'll be checking back when i have chance. I'll be sure to get that 15-20 soldering iron and i have the 30 guage wire now. thanks again.

Ight man thanks for being patient. Ur welcome as well.

Quote

Where do I look for 016 or 014?

Right under the battery pack for example FrankieB4 pic shows the barcode see were 014 is in red...

Quote

now what if you wanted to use the right trigger for rapid fire? is there a way to make it so that the switch activates or deactivates rapid fire for the right trigger?

I believe that has to do with a sleeper but im not sure. LIke if you were to do that i think... you would need sleeper as well..so u can turn the rapid fire off..

Winterz117 · « **Reply #298 on:** August 13, 2008, 02:26:51 PM »

im relatively n00bish, can you explain about sleepers and how to install them? id just rather toggle rapid
with a button and then be able to fire like normal

is that what a sleeper will let me do?

ParadiseEVE · « **Reply #299 on:** August 13, 2008, 08:41:46 PM »

but my barcode is 009? so how does that work

News:

Author Topic: Rapid Fire Method (No Chip) (Read 379832 times)