Author Topic: Rapid Fire Method (No Chip) (Read 380414 times)

SYSTEM aka (Cyberpyrot) · « **on:** April 02, 2008, 07:13:39 PM »

Are you tired of those complicated Microcontrollers or those expensive ebay kits well here at acidmods we say

em. We are tired of people stealing our work to try and make a quick buck... So to all you Ebay scalpers Kiss my ASSidMods

you got served...Here is the Xbox 360 Rapid Fire Tutorial. In this tutorial all you will need is a button and some wire..

This does not work on the newer Wireless CG version of board or on the newer Wired CL version board

Here is the wiring Ground on LED 1 to Momentary Switch to middle pin on trigger!!! That Easy!!!

You will most likly hear many things about this most of it will be from the scalpers trying to justify charging you $30 for a simple $2 chip and some wire..

My chip is way faster then that... Not true we tested is against our 50Ns code and out 30Ns code anything faster and the controller sees it as full on and you get irratic responces...

That new method will fry your controller.... Altho we have not tested it for long extensive times from the process we are doing and the basic electronics applying ground to the potentiometer of the trigger wil not cause any damage to it as there is always a ground pressent to the trigger it is just a variable ground...

Unlike our SpitFire these people selling this stuff on ebay are scalpers we have always believed our code and knowledge should be free to the public and when we developed the spitfire we wanted to give you guys added features like combo's and mapping buttons not just rapid fire.. Now that every one in the world can have rapid fire with just basic stuff from radioshack we will wait here patiently for the accusations to fly

SYSTEM aka (Cyberpyrot) · « **Reply #1 on:** July 27, 2008, 06:33:26 PM »

KingMike will edit this with the images needed... We have been holding back on this for months now but it is time to stop the bull

theives making money off of our members...

PspKicks316 · « **Reply #2 on:** July 27, 2008, 06:46:34 PM »

There's no way... Can't wait to see this one, I may actually do this then...

SYSTEM aka (Cyberpyrot) · « **Reply #3 on:** July 27, 2008, 06:53:33 PM »

Image Posted...

PspKicks316 · « **Reply #4 on:** July 27, 2008, 06:59:44 PM »

There's no way it's that easy...no freakin' way... I'm trying this asap when I get home later in the week

TW1NKY · « **Reply #5 on:** July 27, 2008, 07:09:37 PM »

I'm going to get a switch to try this out. Thanks, this seems rediculously easy

kink192 · « **Reply #6 on:** July 27, 2008, 07:39:47 PM »

there is no way this can be possible, the led ground would have to be alternating on and off for it to work and i dont think it does that...does it?

KingMike_OS · « **Reply #7 on:** July 27, 2008, 07:49:23 PM »

Will i'm god than The Great King made it work

PS : Make sure the Wire the gose to the LED is the LED that is on the right port

So for EX if the controller on port 2 wire the ground to the LED on left insted of right

PspKicks316 · « **Reply #8 on:** July 27, 2008, 08:04:47 PM »

I still say no way until that YouTube vid works o_O

EDITEDITEDITEDIT:
No. :censored:ing. Way. It WORKS?! I LOL'D at you putting the controller together =P But, sadly, I'm just as fast with a pistol using just my finger. Imagine using the rapid fire then. Awesome. I guess I'll do this when I get home, that's pretty sweet.

I'm still..._kinda_ doubting it until I try for myself...it just seems...way too easy...

kink192 · « **Reply #9 on:** July 27, 2008, 08:13:49 PM »

omg...i cant believe it...how???you guys have no idea how flabbergasted i am, kingmike_os, you have earned the title of god...same with system[i dont know your real name] wow...im just blown away dude

Ch4rL13 · « **Reply #10 on:** July 27, 2008, 08:40:07 PM »

amazing....
i was about to spend like 30 bux on a kit then i see this, AMAZING
i just need a switch now, im so doing it
thx for releasing this

btw 2 things, why did you wait so long to release?
and is this any different then the ones with the kit? like is the kit version going to make the gun shoot faster?

gameroms · « **Reply #11 on:** July 27, 2008, 09:44:16 PM »

i will say some kits shoot faster than others, on ebay.

but i have not compared this yet.

Nemesis · « **Reply #12 on:** July 28, 2008, 02:23:02 AM »

HELL NO! no way..no way..no way, wtf? seriously thats it? i really cannot believe this, after spending a whole load of cash on parts for different methods of rapid fire all i needed was this? this is amazing. im just astonished....thanks so much

zbblanton · « **Reply #13 on:** July 28, 2008, 02:42:45 AM »

so how exacly does this work?

does the led just pulse so fast we can see it?

Luke · « **Reply #14 on:** July 28, 2008, 03:17:03 AM »

what type of led is that can i get a close picture?

Nemesis · « **Reply #15 on:** July 28, 2008, 03:44:21 AM »

Quote from: Luke on July 28, 2008, 03:17:03 AM

what type of led is that can i get a close picture?

its no special type of led from what i can see, its just wired to the led on the board used to show which controller number it is

4dP · « **Reply #16 on:** July 28, 2008, 05:48:18 AM »

wtf i knew of this for a while hmmm

SYSTEM aka (Cyberpyrot) · « **Reply #17 on:** July 28, 2008, 05:50:08 AM »

Quote from: 4dP on July 28, 2008, 05:48:18 AM

wtf i knew of this for a while hmmm

So did we

New Rapid Fire Method (No Chip)
« on: April 02, 2008, 10:13:39 pm »

ifrgtmyname · « **Reply #18 on:** July 28, 2008, 06:33:55 AM »

You lot truley are the best in the business and I am glad you have gone for the open source approach. Just one thing I don't get: where have you soldered the wire onto the LED? on the video it just doesn't show the second wire (or at least not that I can see) anyways I have a spare controller so i'll give this a go

.

thanks again

great work

ApheX · « **Reply #19 on:** July 28, 2008, 06:44:08 AM »

this is a brillant mod guys! Nice way to stick it to the ebayers! i might have to mod my mates controller (i don't have a xbox 360, more sony guy, lol)

DarkHawken · « **Reply #20 on:** July 28, 2008, 07:25:02 AM »

whats the difference between rapid fire and spit fire?

SYSTEM aka (Cyberpyrot) · « **Reply #21 on:** July 28, 2008, 07:33:12 AM »

Quote from: DarkHawken on July 28, 2008, 07:25:02 AM

whats the difference between rapid fire and spit fire?

Spit fire you can write combo's to the buttons like (X,X,Y,B,A,X)

SYSTEM aka (Cyberpyrot) · « **Reply #22 on:** July 28, 2008, 07:34:55 AM »

Quote from: ifrgtmyname on July 28, 2008, 06:33:55 AM

You lot truley are the best in the business and I am glad you have gone for the open source approach. Just one thing I don't get: where have you soldered the wire onto the LED? on the video it just doesn't show the second wire (or at least not that I can see) anyways I have a spare controller so i'll give this a go .

thanks again

great work

Solder to the ground side of the LED to point on the far left..

kink192 · « **Reply #23 on:** July 28, 2008, 08:25:38 AM »

i still dont see how this is possible, please just tell me, does the led ground pulse at all? thats the only way this would make sense to me...please answer so i can get some sleep tonight lol

SYSTEM aka (Cyberpyrot) · « **Reply #24 on:** July 28, 2008, 08:32:49 AM »

Quote from: kink192 on July 28, 2008, 08:25:38 AM

i still dont see how this is possible, please just tell me, does the led ground pulse at all? thats the only way this would make sense to me...please answer so i can get some sleep tonight lol

are you familure with PWM (Pulse Width Modulation)?

PspKicks316 · « **Reply #25 on:** July 28, 2008, 08:55:40 AM »

Nope. What's it do? o_o

ifrgtmyname · « **Reply #26 on:** July 28, 2008, 09:00:49 AM »

hmmm, I just broke a good controller, and then the working bit of a bad one

oh well, neither were complete controllers...

I just cant seem to be able to solder onto the LED, first time was with a 016 model and the LED dropped off during soldering, second time was with a 026 model where the LED was easy to solder to but the LED stopped working...

any advice?

thanks

TaSlAyEr · « **Reply #27 on:** July 28, 2008, 09:02:54 AM »

nice shi- i have to say WOW IT WAS THAT SIMPLE AWWW SHI-

KingMike_OS · « **Reply #28 on:** July 28, 2008, 09:16:48 AM »

yes to solder to the led you want to do it fast. now if hold the solder there too much it will take the casing of the led and will burn out on the next power on.

they way i do it get your wire and dip it in flux also have just a bit soder on the tip of your iron already ..

and all you do hold the wire with the flux at the end next to the led touch the led and wire with
your iron with just a bit soder on it and walah that's it.

you shoud not fight with it it should take in just a sec thats it.

ifrgtmyname · « **Reply #29 on:** July 28, 2008, 09:21:05 AM »

Quote from: KingMike_OS on July 28, 2008, 09:16:48 AM

yes to solder to the led you want to do it fast. now if hold the solder there too much it will take the casing of the led and will burn out on the next power on.

they way i do it get your wire and dip it in flux also have just a bit soder on the tip of your iron already ..

and all you do hold the wire with the flux at the end next to the led touch the led and wire with
your iron with just a bit soder on it and walah that's it.

you shoud not fight with it it should take in just a sec thats it.

thanks for the advice, i'll give that a go now, I was suprised when the LED broke the second time though because i literally touched the LED for a second.

News:

Author Topic: Rapid Fire Method (No Chip) (Read 380414 times)