Author Topic: Rapid Fire Method (No Chip) (Read 379810 times)

SYSTEM aka (Cyberpyrot) · « **Reply #180 on:** July 29, 2008, 08:21:21 AM »

Quote from: F00 f00 on July 29, 2008, 07:38:54 AM

What a great find. Good work guys.

I had no idea people where ebaying stuff for the other mod. Great job on putting an end to that.

Hit me up on msn later I should be on tonight.

Will do f00

StaticFilter · « **Reply #181 on:** July 29, 2008, 10:37:25 AM »

While I realize you guys don't really condone using it online, does anyone actually know someone banned for modding their controller and playing online?

Ack Like You Know · « **Reply #182 on:** July 29, 2008, 10:41:12 AM »

Are you guys going to be posting a code for the 12F683 along with an install procedure? I am inquiring about the code you said you had done for the PIC chips. That would be awesome. Thanks guys.

sean7341 · « **Reply #183 on:** July 29, 2008, 10:57:40 AM »

How can I wire the switch to a button outside of the controller? I could easily do this myself, but I don't know what to do after I solder. Can you add a button to the switch for easy external pressing? Or do you have to let the switch stick out and click it when needed?

Also, how can I tell if I have the correct controller?

Thanks.

kink192 · « **Reply #184 on:** July 29, 2008, 11:06:22 AM »

Quote from: sean7341 on July 29, 2008, 10:57:40 AM

How can I wire the switch to a button outside of the controller? I could easily do this myself, but I don't know what to do after I solder. Can you add a button to the switch for easy external pressing? Or do you have to let the switch stick out and click it when needed?

Also, how can I tell if I have the correct controller?

Thanks.

read the whole thread, several people have said how to determine the controller style, and i dont really understand your first question.

louielesko · « **Reply #185 on:** July 29, 2008, 12:42:54 PM »

is it a requirement to use 30 gauge wire?
There is no radioshack locally and no local hardware/stores have that type of wire only like 28 and lower?

So am I able to use a different type of wire?

Thanks

sprocketme2 · « **Reply #186 on:** July 29, 2008, 01:06:22 PM »

Quote from: louielesko on July 29, 2008, 12:42:54 PM

is it a requirement to use 30 gauge wire?
There is no radioshack locally and no local hardware/stores have that type of wire only like 28 and lower?

So am I able to use a different type of wire?

Thanks

No, as long as your wire is small enough to solder to the TINY solder points on the controller board. Also the wire must not be so big that the controller will not go back together.

Ok Im still having trouble with this mod. I have matrix style controller and the rapid fire does work but not well. It will shoot spiraticly and I was wondering what could be the cause of that?

Also, whats the point of this new chip. Is it any better than the old pic chip, Besides only having 4 wires. The old pic could be done with 4 wires if all you wanted was rapid fire.

Allen626 · « **Reply #187 on:** July 29, 2008, 01:40:23 PM »

Are you selling the same chip and code from this thread? https://www.acidmods.com/forum/index.php?topic=20459.0

Because you stated that the code was bad in this thread : https://www.acidmods.com/forum/index.php?topic=21073.0

Quote from: KingMike_OS on July 23, 2008, 10:56:04 PM

my Controller is working is just the chip was getting to hot and shorthing out the controller.

any way as of now i got 683 work but i have open pin problem that means the rapidfire is always

on can't be turn off so need some more testing i been working with 2 other people on this for 3 days

now so as of Now the code is no good and the will not work till i get some result.

This gose for both chip and hex file that was release.

Not trying to start anything, I am just wondering if you updated the code and if so are you going to release it?

phonzie · « **Reply #188 on:** July 29, 2008, 03:32:12 PM »

it actually worked

anybody who says otherwise is :censored:ing retarded seeing as how that was my first time solder (no longer a virgin baby). This is awesome. Anybody have a list of games that this works well on, i know the most popular is COD4

xStang05 · « **Reply #189 on:** July 29, 2008, 03:49:53 PM »

hey everyone. im about to try this mod. im kinda new to all this so if anyone can give me any advide, pointers or anyhing would be useful. i just went and got a switch and some 30-gauge wrapping wire. what else do i need and what should i do step by step. thanx to everyone who helps

kink192 · « **Reply #190 on:** July 29, 2008, 06:38:38 PM »

Quote from: xStang05 on July 29, 2008, 03:49:53 PM

hey everyone. im about to try this mod. im kinda new to all this so if anyone can give me any advide, pointers or anyhing would be useful. i just went and got a switch and some 30-gauge wrapping wire. what else do i need and what should i do step by step. thanx to everyone who helps

take the wire and solder it to the switch, once done solder one lead to the GROUND on the first person led, solder the other lead to the middle pin for the trigger. done.

xStang05 · « **Reply #191 on:** July 29, 2008, 06:53:01 PM »

Quote from: kink192 on July 29, 2008, 06:38:38 PM

take the wire and solder it to the switch, once done solder one lead to the GROUND on the first person led, solder the other lead to the middle pin for the trigger. done.

so i take the wrapping wire, solder it do what part of the switch, then wheres the first person led

kink192 · « **Reply #192 on:** July 29, 2008, 06:59:32 PM »

what kind of switch are you using? and sides i think on the first page there is a good illustration

t00thlesstyrone · « **Reply #193 on:** July 29, 2008, 07:00:54 PM »

Can someone tell me the kinda wire and the button i need, or like links ?

on the shop there is one for the chip but i just want this one, sooooooo please someone help a n00b

xStang05 · « **Reply #194 on:** July 29, 2008, 07:22:31 PM »

Quote from: kink192 on July 29, 2008, 06:59:32 PM

what kind of switch are you using? and sides i think on the first page there is a good illustration

its a mini momentary switchthe bottem of it looks kinda like a mini plug in

SiLiCONx · « **Reply #195 on:** July 29, 2008, 08:13:50 PM »

louielesko make sure you specify "Wrapping Wire" to your local RadioShaft etc store, most of the time they have it and don't know what your talking about. In my honest opinion 90% of the reason for using the 30awg wrapping wire is 1) its small and 2) its easy to mold to your needs and solder. If time is not a crunch many electronics stores will have what you need online. Good luck!

xStang05 · « **Reply #196 on:** July 29, 2008, 08:44:36 PM »

so the 2 prongs stickin from the switch. do i need a wire from each of the prongs or just one of em?

Hoopdy · « **Reply #197 on:** July 29, 2008, 08:53:49 PM »

You only use two wires right? One going to the SMD and the other to the middle pin...?

DjBulletFast · « **Reply #198 on:** July 29, 2008, 09:25:57 PM »

Hey guys this is awesome I think i'm going to try this. I have never really tried to solder before. If I buy one of the Programmed PIC12F683 New Style Controllers chips does it come with instructions. and if so I can see them first to see if i want to take jump in to trying this?

KingMike_OS · « **Reply #199 on:** July 29, 2008, 10:20:55 PM »

here the basic installation for the right trigger to do rapid fire with a on/off switch

halo2jumper · « **Reply #200 on:** July 30, 2008, 02:08:22 AM »

Hey everyone^^
I do that Mod too today and it works finde:)
But my problem is,it works only in CoD4,right?

Nemesis · « **Reply #201 on:** July 30, 2008, 03:12:30 AM »

Quote from: halo2jumper on July 30, 2008, 02:08:22 AM

Hey everyone^^
I do that Mod too today and it works finde:)
But my problem is,it works only in CoD4,right?

nope it should work with all fps games that use the r trigger to fire

halo2jumper · « **Reply #202 on:** July 30, 2008, 03:21:30 AM »

Quote from: Nemesis on July 30, 2008, 03:12:30 AM

nope it should work with all fps games that use the r trigger to fire

really?
I test it in CoD4 and works....then i test it in Halo 3 and it doesnt work

Any Help?

KingMike_OS · « **Reply #203 on:** July 30, 2008, 05:16:26 AM »

halo 3 can't be done .. man how many times i have to say this there is no rapid fire in halo 3 .

it works on gears of war army of one R6 las vegas.

Whazup · « **Reply #204 on:** July 30, 2008, 06:57:44 AM »

Actually there is a small difference between normal and rapidfire on halo 3, with rapidfire on you have less recoil.

gameroms · « **Reply #205 on:** July 30, 2008, 06:59:32 AM »

there is rapidfire in halo 3, but its coded into the game to only let you fire so fast.

louielesko · « **Reply #206 on:** July 30, 2008, 07:37:18 AM »

Hey! Thanks guys! This no-chip method is badass!
dont listen to these other downers that say its "spiratac" or wtf they said.
On COD 4, it couldn't be any better
On Vegas, turn your weapon to single shot - dead on accuracy.

No-Chip method, if you have the right requirements, is amazing. It was my very first soldering job and it worked perfect, provided i dripped a lot of solder lol, but o well

Thanks again guys!

t00thlesstyrone · « **Reply #207 on:** July 30, 2008, 08:37:54 AM »

okay i dont really know how to solder or what i need for it so could someone like gimme exact directions or something?

Bullet Pulse · « **Reply #208 on:** July 30, 2008, 09:24:14 AM »

Quote from: t00thlesstyrone on July 30, 2008, 08:37:54 AM

okay i dont really know how to solder or what i need for it so could someone like gimme exact directions or something?

LOL

Watch the videos on the first page, or look up soldering, on youtube.
Good luck.

jdub1581 · « **Reply #209 on:** July 30, 2008, 09:55:42 AM »

thereis another mod that i came across without having to use a chip... will add pics...
the only problem that occured was that after about 5 mins of play it would stop working, including the Rt, after letting it sit for a while it would work again...
perhaps one of you might know... i think it has to do with grounding? or maybe a resistor is needed? im not real techy so i dont know... was shown that if you take the hot lead from a rumbler connect it to the center post of the trigger you get rapid fire... tried but after a few mins it stops, seems to build up some resistance in the connection (according to ohm meter) any help or advice would be great!

News:

Author Topic: Rapid Fire Method (No Chip) (Read 379810 times)