Author Topic: PSP Screen Replacement BOTCHED ?  (Read 4369 times)

Offline jpeeps

  • Guppy
  • *
  • Posts: 3
  • Post quality +0/-0
PSP Screen Replacement BOTCHED ?
« on: May 22, 2008, 10:37:28 AM »
Hello, My son tried to replace the screen in his psp,Bot the screen on line, he could not get the backlight cable back into its slot, and eventually broke off the latch on the board for both the backlight cable and the screen cable that hold it into place. We are not sure what to do now. do we need to send it to a shop for another board.. are we hosed? PLEASE any ideas?




What a bone head! Please help.. I will be sending it somewhere in the net two days if i dont get any significant ideas.

TIA


Offline tmandt

  • Club AM VIP
  • E = MC² Mad Scientist
  • *
  • Posts: 1544
  • Post quality +1/-0
  • Gender: Male
  • o.O tOny! JDMKID
Re: PSP Screen Replacement BOTCHED ?
« Reply #1 on: May 22, 2008, 12:14:41 PM »
just get a new mobo. thats all i can say

Offline j.s2ghetto

  • Millennium Poster
  • *
  • Posts: 1001
  • Post quality +0/-0
  • Gender: Male
  • GHETTO inside
Re: PSP Screen Replacement BOTCHED ?
« Reply #2 on: May 22, 2008, 12:45:30 PM »
just get a new mobo. thats all i can say
don't do that just put a piece of electrical tape on top of the connectors when they r in so that they stay in and it should work fine

thank u P3nnywise for the sig
"See you have to understand the difference. The difference between me and you is to you, this is your job. To me, this is my life. The club; that's my job. The mall; that's my job. Your neighborhood; that's my job. This studio; this is my life. This is what I do better than anything."

Offline zbblanton

  • Acid Modder
  • *
  • Posts: 979
  • Post quality +5/-0
  • Gender: Male
    • My modding site
Re: PSP Screen Replacement BOTCHED ?
« Reply #3 on: May 22, 2008, 01:14:31 PM »
y dont u just place the connectors in anyway they will stay.

Offline *FuFa

  • learn2/spell/
  • Millennium Poster
  • *
  • Posts: 1316
  • Post quality +0/-0
  • Gender: Male
  • Spam King Barfday Boy¯\(°_o)/¯ ¯\(°_o)/¯ ¯\(°_o)/¯
Re: PSP Screen Replacement BOTCHED ?
« Reply #4 on: May 22, 2008, 01:33:51 PM »
Insert some paper into the connector, then slide in the cable, this highers the pressure and the cable will have a good connection, when the screen seems to work fine, put tape over it so it stays in.

Have no shame in being kindly and gentle, but if the time comes in the time of your life to kill, kill and have no regret. In the time of your life, live so that, in that wonderous time you shall not add to the misery and sorrow of the world, but shall smile to the infinite delight and mystery of it.

Offline Aricado

  • Granny Spanker
  • *
  • Posts: 398
  • Post quality +0/-0
  • Gender: Male
  • Hiding under your bed devouring your dreams..
Re: PSP Screen Replacement BOTCHED ?
« Reply #5 on: May 22, 2008, 01:36:27 PM »
Insert some paper into the connector, then slide in the cable, this highers the pressure and the cable will have a good connection, when the screen seems to work fine, put tape over it so it stays in.
He can put some tape on the FPC and it's easier for inserting it.

Aricado: Kenshinffx made my sig.
"I made your Avatar too!"
Aricado: Get outta my head!!!!

Offline GhoSt

  • Creating Null
  • Around the block
  • *
  • Posts: 2552
  • Post quality +19/-0
  • Gender: Male
  • Null Pointer Exception
Re: PSP Screen Replacement BOTCHED ?
« Reply #6 on: May 22, 2008, 04:24:12 PM »
it should be fine mate just slot the backlight in and it should stay in place by itself then put the screen connector in and press it in well then give it a good electrcial taping so it stays there and you are good to go, ps. i did this today morning :tup:
|Variegation - GhoSt's Final Controller|

|Nothing is deterministic.|

Offline jpeeps

  • Guppy
  • *
  • Posts: 3
  • Post quality +0/-0
Re: PSP Screen Replacement BOTCHED ?
« Reply #7 on: May 23, 2008, 05:09:29 AM »
thanks to everyone that replied, I think I am screwed and have to send this thing in for a new mb AND screen... if you notice there is no where to slide in the back light cable, the whole piece broke off... and the connectors on the backlight are on the top of the cable, so it needto to either twist and be taped down... just too much work.. I tried to turn it on to see if I would get anything on the screen.. I got NOTHING.. no backlight.. nothing.. this sux... this will prob cost me around $200 to fix... AAARGH!

thanks for all that responded

Please let me know if you know of any reputable places in the US I can send this thing and get it fixed... of course other than sony.

Thanks again. :sadno:

VoX

  • Guest
Re: PSP Screen Replacement BOTCHED ?
« Reply #8 on: May 23, 2008, 05:17:10 AM »
Don't spend $200, you can buy a new motherboard here for around $45 or $50

Offline whitetop

  • E = MC² Mad Scientist
  • *
  • Posts: 1910
  • Post quality +39/-12
  • Gender: Male
  • im not in the ass kissing team
Re: PSP Screen Replacement BOTCHED ?
« Reply #9 on: May 23, 2008, 05:27:25 AM »
why ask for advise if your not going to do anything with it.

al you done was broke the clip that puts a bit a presher on it to keep it in just put the cable in as far as it can go and put about 3mm of tape on it and carefully put the screen back in the presher with the screen will keep the cable in anyway.
come to the rite place if you kiss admins as they promote you to admin.

Offline jpeeps

  • Guppy
  • *
  • Posts: 3
  • Post quality +0/-0
Re: PSP Screen Replacement BOTCHED ?
« Reply #10 on: May 23, 2008, 09:18:26 AM »
I tried the taping suggestion, but if you look closely, the backlight cable housing does not have the piece on it where you can just slide the cable in, and the connectors on the cable are on top so I would have to twist the cable and that wont allow it to close. I do need a new mb, I will have to research which type I have and where to get one.. On this site?   yes saw i can get a new one for $99 on ebay !!  I will look into that also.. Thanks

Offline j.s2ghetto

  • Millennium Poster
  • *
  • Posts: 1001
  • Post quality +0/-0
  • Gender: Male
  • GHETTO inside
Re: PSP Screen Replacement BOTCHED ?
« Reply #11 on: May 23, 2008, 02:10:31 PM »
if u need a new mobo let me know i got alot and to find out wat type u have just look for this Ta-081 TA-079 TA-082 or TA-086 in the ananlog stick contact area

thank u P3nnywise for the sig
"See you have to understand the difference. The difference between me and you is to you, this is your job. To me, this is my life. The club; that's my job. The mall; that's my job. Your neighborhood; that's my job. This studio; this is my life. This is what I do better than anything."

Offline GhoSt

  • Creating Null
  • Around the block
  • *
  • Posts: 2552
  • Post quality +19/-0
  • Gender: Male
  • Null Pointer Exception
Re: PSP Screen Replacement BOTCHED ?
« Reply #12 on: May 23, 2008, 02:31:21 PM »
just go to the auctions section and put up a request for a mobo
|Variegation - GhoSt's Final Controller|

|Nothing is deterministic.|

Offline Ch4rL13

  • R4z3R
  • Acid Modder
  • *
  • Posts: 869
  • Post quality +0/-0
  • Gender: Male
    • R4z3R Gaming
Re: PSP Screen Replacement BOTCHED ?
« Reply #13 on: May 23, 2008, 04:11:51 PM »
um dude those are ur pics right?
u have the connector thngy on ther, mine broke of and i can still put my cable in and it works..


Offline Gamer4life

  • Granny Spanker
  • *
  • Posts: 483
  • Post quality +0/-0
  • Gender: Male
  • I will be a Gamer until i die.
    • my own site please join and be active
Re: PSP Screen Replacement BOTCHED ?
« Reply #14 on: May 23, 2008, 07:30:29 PM »
and plus if u think its gonna take $200 2 fix it u could just buy him a new psp or a psp bundle i would go 4 the GOW bundle

98% of teenage population has tried smoking pot if you're part of the 2% who hasn't copy & paste this into your sig

 

SMF spam blocked by CleanTalk
SimplePortal 2.3.5 © 2008-2012, SimplePortal