Author Topic: Need wiring help  (Read 2197 times)

Offline kaponelb

  • Chief squatting Hard
  • *
  • Posts: 14
  • Post quality +0/-0
Need wiring help
« on: April 21, 2008, 04:27:52 PM »
Im new at this been looking around for a tutorial but cant find one that shows pictures still i want to do the trigger mod and also add to leds to the umd door im using blue leds what resistor would i need for 4 blue leds and how would i wire it all up so everything works with the hold swith any digrams that show how to do this

Offline Ch4rL13

  • R4z3R
  • Acid Modder
  • *
  • Posts: 869
  • Post quality +0/-0
  • Gender: Male
    • R4z3R Gaming
Re: Need wiring help
« Reply #1 on: April 21, 2008, 04:57:08 PM »
thers a tut in the tut section somewhere
https://www.acidmods.com/forum/index.php?topic=14685.0


Offline kaponelb

  • Chief squatting Hard
  • *
  • Posts: 14
  • Post quality +0/-0
Re: Need wiring help
« Reply #2 on: April 21, 2008, 05:07:04 PM »
how do i wire all the leds together and what resistor do i need for it

Offline Ch4rL13

  • R4z3R
  • Acid Modder
  • *
  • Posts: 869
  • Post quality +0/-0
  • Gender: Male
    • R4z3R Gaming
Re: Need wiring help
« Reply #3 on: April 21, 2008, 06:37:11 PM »
well if your using the 5vlt power source on the mobo u need a 10 ohm (not 10k ohm) and for wiring, i believe the answer is to wire in parralel. (i think)


Offline kaponelb

  • Chief squatting Hard
  • *
  • Posts: 14
  • Post quality +0/-0
Re: Need wiring help
« Reply #4 on: April 21, 2008, 07:49:28 PM »
so just wire all the leds together and one 10 ohm resister would be fine for 4 blue leds ima wire it to the hold switch board is that 5 volt

and is this the right resitor

http://www.radioshack.com/product/index.jsp?productId=2062338&cp=&sr=1&origkw=10+ohm&kw=10+ohm&parentPage=search

Offline folklord36

  • Research & Development
  • Acid Modder
  • *
  • Posts: 810
  • Post quality +0/-0
  • Gender: Male
Re: Need wiring help
« Reply #5 on: April 21, 2008, 07:51:59 PM »
yes right resistor but so you know in ur circut you have to have resistor before the positives on leds

Offline kaponelb

  • Chief squatting Hard
  • *
  • Posts: 14
  • Post quality +0/-0
Re: Need wiring help
« Reply #6 on: April 21, 2008, 07:58:45 PM »
so right off the hold board i add the resistor and then from there the power wire to the leds is that right

Offline kaponelb

  • Chief squatting Hard
  • *
  • Posts: 14
  • Post quality +0/-0
Re: Need wiring help
« Reply #7 on: April 21, 2008, 08:05:12 PM »
so is the 10 ohm resistor good for the four blue leds because i used a resistor calculator and it says to go with a 22 ohm

Offline GhoSt

  • Creating Null
  • Around the block
  • *
  • Posts: 2552
  • Post quality +19/-0
  • Gender: Male
  • Null Pointer Exception
Re: Need wiring help
« Reply #8 on: April 21, 2008, 08:06:47 PM »
yes you must wire them in paralell so it doubles the current if you wire in series the psp wont be able to surply enough voltage :tup:
|Variegation - GhoSt's Final Controller|

|Nothing is deterministic.|

Offline kaponelb

  • Chief squatting Hard
  • *
  • Posts: 14
  • Post quality +0/-0
Re: Need wiring help
« Reply #9 on: April 21, 2008, 08:11:20 PM »
what u mean parallel sorry im new guys but thanks for all the help cant wait till i do this

Offline Blazinkaos

  • Technology Revolution
  • Art & Theme Team
  • E = MC² Mad Scientist
  • *
  • Posts: 2259
  • Post quality +12/-0
  • Gender: Male
  • Time Passes Will You
    • ROOKIE BUILDERS DISCORD
Re: Need wiring help
« Reply #10 on: April 23, 2008, 03:24:41 PM »
 :nono: u dnt know wat parallel is uhh u better look it up on google on what it is..or wait here a pic i found google taht should help on what parallel is..

ignor the Rs that were u should stick the LED lights and the resistor attaches to the positve before u start the parallel.. hope that helps
« Last Edit: April 23, 2008, 03:27:26 PM by Blazinkaos »

*Thanks Modders/Friends:Ghost_Death, gr8npwrfl, Blizzrad, Kenshinffx.
*Thanks 802Chives for the Art position!

 

SMF spam blocked by CleanTalk
SimplePortal 2.3.5 © 2008-2012, SimplePortal