Author Topic: I would like to have LEDs on my fat psp. But i don't know how. plz help  (Read 1904 times)

Offline Vigilo of Noctis

  • Guppy
  • *
  • Posts: 3
  • Post quality +0/-0
  • Gender: Male
 :help: My b  day is comin up and i would like to have LEDs on my L and R buttons,Umd drive, D-pad, and the other side (i forgot the name lol). But i don't know how, i've never soldered before and i probably don't have the stuff to do it. plz give me a full tut.  If i did this and had to solder it what kind of places could i go to? So plz acidmods.com pimp my psp. :beg:

Offline T3KN1K4L

  • Virtual Modder Development Slavedriver!
  • Granny Spanker
  • *
  • Posts: 422
  • Post quality +0/-0
  • Gender: Male
  • Not Admin
https://www.acidmods.com/forum/index.php?board=277.0

That's the PSP Tutorials section.

https://www.acidmods.com/forum/index.php?board=281.0

That's the general modding tutorial section.

https://www.acidmods.com/forum/index.php?board=303.0

That is the unfinished tutorials section, a kind of misnomer, since the tutorials are mainly done other than images, that were lost due to the move from the Wiki format we used to have to the format it now has.

As to the places question I don't exactly understanding what you are asking, if you are asking where you can get this done, then you can try to find a buddy that can solder near you, or you can check out the Modders For Hire section here:

https://www.acidmods.com/forum/index.php?board=239.0

Note: AcidMods takes no responsibility for business conducted in the Modders For Hire Section!

Oh yeah and almost forgot, welcome to AcidMods.
« Last Edit: April 24, 2008, 07:26:26 PM by T3KN1K4L »

Offline glenng82

  • Ω Allumnist Ω
  • *
  • Posts: 144
  • Post quality +0/-0
  • Gender: Male
look around here theres tutorials and help with majority of problems and even a section on how to solder
i wouldnt jump right into the psp mods right away if you havent soldered before u could really mess up your psp
good luck & HAPPY B-DAY!!!!!!!!

Offline Ch4rL13

  • R4z3R
  • Acid Modder
  • *
  • Posts: 869
  • Post quality +0/-0
  • Gender: Male
    • R4z3R Gaming
welcome to AM
go get ur solderin iron at radio-shack (15-20 watt) use rosin core solder. and u might find ur leds at radio-shack but if they dont have go to mouser.com and search for 0603 blue LED (or w/e color u want) hope ur mod works out :victory:


Offline Luke

  • E = MC² Mad Scientist
  • *
  • Posts: 1923
  • Post quality +12/-0
  • Gender: Male
  • ..
welcome to AM
go get ur solderin iron at radio-shack (15-20 watt) use rosin core solder. and u might find ur leds at radio-shack but if they dont have go to mouser.com and search for 0603 blue LED (or w/e color u want) hope ur mod works out :victory:

im not sure about that ur best chances is more like ebay



and as far as i kno blue doesnt require resitors

and i used a 25 watt but if ur compellety new to soldering use a 15 wat coz they get so hot the diode blows

Offline tripsalot

  • ♥ Poker Champ ♠♣
  • *
  • Posts: 242
  • Post quality +0/-0
  • Gender: Male
    • modder knowledge
happy birthday and good luck on your mods,but if you have never soldered i would recomend finding stuff around your house that is cheaper than a psp to practice on,and get somewhat good at it before you go to you psp it is an expensive thing to make a silly mistake on.

 

SMF spam blocked by CleanTalk
SimplePortal 2.3.5 © 2008-2012, SimplePortal