Author Topic: my charge mod doesn´t work anymore  (Read 1867 times)

Offline Rapten126

  • Guppy
  • *
  • Posts: 4
  • Post quality +0/-0
my charge mod doesn´t work anymore
« on: May 20, 2008, 09:33:24 AM »
i did the ubs charge mod and at the first time it´s all ok but ca. 1 month later it doesn´t charge.
please help.

thx

Offline crashman2k7

  • Who Farted ???
  • *
  • Posts: 206
  • Post quality +0/-0
  • Gender: Male
Re: my charge mod doesn´t work anymore
« Reply #1 on: May 20, 2008, 10:15:57 AM »
Most likely you burnt out your charger's fuse (located top right corner) just fuse it from point to point wid a wire and it should be fine

Offline Rapten126

  • Guppy
  • *
  • Posts: 4
  • Post quality +0/-0
Re: my charge mod doesn´t work anymore
« Reply #2 on: May 20, 2008, 10:19:01 AM »
thx i try it out

Offline Rapten126

  • Guppy
  • *
  • Posts: 4
  • Post quality +0/-0
Re: my charge mod doesn´t work anymore
« Reply #3 on: May 20, 2008, 10:26:29 AM »
1 more question when i do this than i make a short ?

Offline crashman2k7

  • Who Farted ???
  • *
  • Posts: 206
  • Post quality +0/-0
  • Gender: Male
Re: my charge mod doesn´t work anymore
« Reply #4 on: May 20, 2008, 10:29:12 AM »
nope u make a bridge =) fuse are only there to make connections if it blown it can be replaced with almost anything(depending size of amperage) in ur case it not much
i use to fix blown fuses of my house with a nickle:)

Offline Rapten126

  • Guppy
  • *
  • Posts: 4
  • Post quality +0/-0
Re: my charge mod doesn´t work anymore
« Reply #5 on: May 20, 2008, 10:35:38 AM »
^^ thx it works fine :)

Offline crashman2k7

  • Who Farted ???
  • *
  • Posts: 206
  • Post quality +0/-0
  • Gender: Male
Re: my charge mod doesn´t work anymore
« Reply #6 on: May 20, 2008, 10:37:58 AM »
np:)

Offline Rory

  • ZOMG, A Deda!!!!!
  • Club AM VIP
  • Acid Modder
  • *
  • Posts: 641
  • Post quality +0/-0
  • Gender: Male
  • Eyy lmao
Re: my charge mod doesn´t work anymore
« Reply #7 on: May 21, 2008, 02:50:48 AM »
i use to fix blown fuses of my house with a nickle:)

Uh... Replacing a fuse with a nickel is BAD.
Sure it works but its BAD.
Fuses are there to blow if there is a power surge to protect electronic items in your home.
Power surges cause the bit inside to melt and stop the connection.
A nickel won't melt. Thus going straight into all your stuff.
Possibly resulting in dead electronics/home on fire O_O.

Be careful mate :P.
Quote from: IndyChav
I think that the king of spam should be immune to the punishment for posting spam everywhere, so post away Rory :tup:
Quote from: FreeK
couldnt of said it any better.

 

SMF spam blocked by CleanTalk
SimplePortal 2.3.5 © 2008-2012, SimplePortal