Author Topic: CoolMods.co.uk Clear Case Review for PSP Slim (Warning lots of pictures) (Read 8785 times)

l0rdnic0 · « **on:** May 22, 2008, 02:34:40 PM »

Hey all I gotta tell you about this Clear Case from CoolMods.co.uk I received mine in the mail the other day and spent the night swapping my internals into it. I have seen a number of clear case parts since I started messing with PSP’s but this one take’s the cake. This was by far the nicest cleanest reproduction of the factory case right down to the screw holes that were not tapped, which made for a perfect fit when screwing things in. The Back plate itself was cut perfectly as all parts fit in place just as they would in the factory case. And clarity! This case is so clear that you can read the smallest of fine print without any blurring of the letters.
The case comes with the Front plate, the Back plate, the UMD Door, Battery cover and Silver Trim that goes around the case. One thing to note is that silver trim is lighter then the factory trim. I opted to skip replacing the memory cover trim and that’s how I noticed the change in color of it. Also for those of you with silver original PSPs get the bonus of a nice color match between the silver trim to the factory gray numb not sure about other color slims as I only have four gray ones.
The case was shipped to me in a very well protected package and the UMD Door and Silver Trim were connected to the case already along with the WiFi switch and Power Switch. The Front plate had clear plastic covers on the screen to protect it during shipping and install so there would be no scratches.
Also, the case comes with the Power, Hold, Mem Stick and WIFI silk screening on it but due to copyright stuff no PSP or SONY logos. Never the less this case will have all your PSP friends drooling and it holds lost of possibilities for some cool visual hacks.
I would recommend that when you receive the case to leave it in the package until your ready to install it and when you do install it make sure your are wearing gloves. I say that because it’s a pain in the butt to get finger prints out of the inside of clear cases and this one would be no different. For all of you that are unsure if you could do the case swap kenshinffx has created the Case Swap Tut that can be found HERE

I can tell you it is very, very easy and when your done you will be impressed.

Since I have taken these pictures last week I have been very busy working on my next mod so that I could should you all something new and different and just in time for a clear case! WIN WIN for us.

DubbleDutch · « **Reply #1 on:** May 22, 2008, 02:43:16 PM »

looks nice nic0

and that list you have there on the piece of paper :P

is that for that slim psp ^.^ ?

and what is that wire doing in the umd door !! :P on pic 3 5 and 8 you will be able to see it on the top right corner :P of the umd door

VoX · « **Reply #2 on:** May 22, 2008, 02:52:33 PM »

Looks good, Pictures are high quality and you can see a lot of detail.

P.S: The BLUE! It burns! JK

RoBot1ks · « **Reply #3 on:** May 22, 2008, 03:02:53 PM »

Yes I agree...That looks great!! I was going to buy the clear case from DealExtreme, but I think I would rather pay more for better quality (thanks ken) He changed my mind for me

Gamer4life · « **Reply #4 on:** May 22, 2008, 03:06:00 PM »

that is an awesome looking psp nico

ACIDMODS.COM RULES

Kenshinffx · « **Reply #5 on:** May 22, 2008, 03:15:40 PM »

Looks great Nic0! Awesome Job!

iam7805 · « **Reply #6 on:** May 22, 2008, 04:18:11 PM »

Nice review! I was planning on doing one myself but I probably wouldn't be able to do as good of a job.

I reccomend that you use your original silver trim for three reasons:

- The color of the silver is different (already stated by Nic0)
- The font on the memory stick door is different from the original
- The switches fit more tightly than the original

alexandercyle · « **Reply #7 on:** May 22, 2008, 04:20:36 PM »

whats up with your battery???

iam7805 · « **Reply #8 on:** May 22, 2008, 04:34:34 PM »

You guys can have a sneak peak at my WIP PSP with the clear case. Notice the black trim.

-iam

l0rdnic0 · « **Reply #9 on:** May 22, 2008, 04:40:36 PM »

Quote from: DubbleDutch on May 22, 2008, 02:43:16 PM

and that list you have there on the piece of paper :P
is that for that slim psp ^.^ ?

and what is that wire doing in the umd door !! :P on pic 3 5 and 8 you will be able to see it on the top right corner :P of the umd door

Wow dude your sharp!!! two points for you. Say yeah that paper os part of my next mod but I will never tell. well sorta

As for that wire.. umm Ill never tell thats my secret

As for the battery I wanted to rip the cover off to see the circut it adds to the clear case!!!!

Luke · « **Reply #10 on:** May 22, 2008, 04:50:11 PM »

is nly 2 people that notice the battery has a big hole in it

tmandt · « **Reply #11 on:** May 22, 2008, 05:09:30 PM »

nice nico. now if it had a clear trim. WOW

DubbleDutch · « **Reply #12 on:** May 22, 2008, 05:21:25 PM »

Quote from: l0rdnic0 on May 22, 2008, 04:40:36 PM

Wow dude your sharp!!! two points for you. Say yeah that paper os part of my next mod but I will never tell. well sorta

As for that wire.. umm Ill never tell thats my secret

As for the battery I wanted to rip the cover off to see the circut it adds to the clear case!!!!

so many secrets, so less time to reveal

anthonyta · « **Reply #13 on:** May 22, 2008, 05:48:55 PM »

Quote from: tmandt on May 22, 2008, 05:09:30 PM

nice nico. now if it had a clear trim. WOW

i actually have met a dude that can do that for me. well actually not met him. there is a dude on ebay who manufactures them i guess there not legit but they work. i asked him if he can make clear ones and he said yes he could but he has to produce a bunch at a time (1000). i didnt have the money to do it so i didn't. i begged for just one and said that i could get people to buy it (acidmods). ill see if i can get a hold of him again maybe work something out with coomods.

uberice · « **Reply #14 on:** May 23, 2008, 12:48:13 AM »

Does this mean when you switch the back plating, that you would have to transfer the whole shebang from the one to the other? (silver to clear)

DubbleDutch · « **Reply #15 on:** May 23, 2008, 02:11:52 AM »

Quote from: uberice on May 23, 2008, 12:48:13 AM

Does this mean when you switch the back plating, that you would have to transfer the whole shebang from the one to the other? (silver to clear)

yes

you will have to disassemble the psp out of the other case

then rebuild it in the clear case

ApheX · « **Reply #16 on:** May 23, 2008, 05:19:33 AM »

Quote from: anthonyta on May 22, 2008, 05:48:55 PM

i actually have met a dude that can do that for me. well actually not met him. there is a dude on ebay who manufactures them i guess there not legit but they work. i asked him if he can make clear ones and he said yes he could but he has to produce a bunch at a time (1000). i didnt have the money to do it so i didn't. i begged for just one and said that i could get people to buy it (acidmods). ill see if i can get a hold of him again maybe work something out with coomods.

Really!? that would be sweet, i've been after a blue trim for my slim. don't want to paint as i'm not sure i can do it. whats the guys name dude?

Kenshinffx · « **Reply #17 on:** May 23, 2008, 08:53:47 AM »

Quote from: uberice on May 23, 2008, 12:48:13 AM

Does this mean when you switch the back plating, that you would have to transfer the whole shebang from the one to the other? (silver to clear)

everything is screwed down to the backplate. I'm releasing the Clear Case Tutorial ASAP.

Nemesis · « **Reply #18 on:** May 23, 2008, 09:16:11 AM »

Like the psp

Like the pics

Like the gloves

Awesome

l0rdnic0 · « **Reply #19 on:** May 23, 2008, 09:54:04 AM »

Quote from: Nemesis on May 23, 2008, 09:16:11 AM

Like the gloves
Awesome

Dr. Mod is in the house

Btw all thanks for the comments. I'll post the finished product soon, it will have more then just a bunch of leds I HOPE

Kenshinffx · « **Reply #20 on:** May 23, 2008, 09:56:53 AM »

Quote from: l0rdnic0 on May 23, 2008, 09:54:04 AM

Dr. Mod is in the house

Btw all thanks for the comments. I'll post the finished product soon, it will have more then just a bunch of leds I HOPE

Is it just me? Or is Nic0 Drinking BAWLS?

dedafmonteur · « **Reply #21 on:** May 23, 2008, 10:01:32 AM »

i had that impression to ken...lol

l0rdnic0 · « **Reply #22 on:** May 23, 2008, 11:01:59 AM »

Why yes I was, I have stock in that comapny. If I'm not drinking the beer I'm drinking the BAWLS

DubbleDutch · « **Reply #23 on:** May 23, 2008, 03:54:39 PM »

ln how many points do i need to let you tell me the secrets :P

got 2 already ^^

l0rdnic0 · « **Reply #24 on:** May 23, 2008, 05:07:26 PM »

noah03ark · « **Reply #25 on:** May 23, 2008, 05:32:35 PM »

right

well on the topic of the review, very nice! sounds like a good product

(my bad for not responding sooner)

News:

Author Topic: CoolMods.co.uk Clear Case Review for PSP Slim (Warning lots of pictures) (Read 8785 times)

VoX