Author Topic: PSP internal accessories ideas  (Read 3630 times)

Offline rceckspurt13

  • Acid Modder
  • *
  • Posts: 637
  • Post quality +2/-0
  • Gender: Male
PSP internal accessories ideas
« on: May 25, 2008, 07:34:11 PM »
     I was just sitting here looking at my psp and then i thought of somthing, why has nobody used the battery compartment for internal accessories instead of taking out the umd drive?
 i realize that this means that you would have to use an external power source but it would give you plenty of space to work with. also if you didnt use wifi, couldent you take out the wifi board and have space to use too? anyway im new to the psp modding scene. about the only one ive done is the usb charge mod for the fat psp. my psp is not homebrew enabled either.
the only device that ive hacked the firmware of is the ipod touch.
 but if you have any ideas please post. thanks.
Any Questions? Please Contact Me: rceckspurt13@gmail.com

Offline psp339

  • Millennium Poster
  • *
  • Posts: 1371
  • Post quality +0/-0
  • Gender: Male
Re: PSP internal accessories ideas
« Reply #1 on: May 25, 2008, 07:42:56 PM »
You wouldn't want to take out the wifi board board because you need to use your memory stick.

Offline Ch4rL13

  • R4z3R
  • Acid Modder
  • *
  • Posts: 869
  • Post quality +0/-0
  • Gender: Male
    • R4z3R Gaming
Re: PSP internal accessories ideas
« Reply #2 on: May 25, 2008, 07:57:44 PM »
yea true
and we dont want a big bulky battery sticking out the back but if u could shrink it then maybe it would be a good idea


Offline Gamer4life

  • Granny Spanker
  • *
  • Posts: 483
  • Post quality +0/-0
  • Gender: Male
  • I will be a Gamer until i die.
    • my own site please join and be active
Re: PSP internal accessories ideas
« Reply #3 on: May 25, 2008, 08:07:15 PM »
could you maybe cut off the part of the wifi board that does wifi but leave the mem stuff on would that work you know like cut the wifi board in half

98% of teenage population has tried smoking pot if you're part of the 2% who hasn't copy & paste this into your sig

Offline anthonyta

  • MFH
  • Granny Spanker
  • *
  • Posts: 422
  • Post quality +1/-0
  • Gender: Male
Re: PSP internal accessories ideas
« Reply #4 on: May 25, 2008, 09:18:54 PM »
could you maybe cut off the part of the wifi board that does wifi but leave the mem stuff on would that work you know like cut the wifi board in half

you're crazy. haah

Offline Ch4rL13

  • R4z3R
  • Acid Modder
  • *
  • Posts: 869
  • Post quality +0/-0
  • Gender: Male
    • R4z3R Gaming
Re: PSP internal accessories ideas
« Reply #5 on: May 25, 2008, 09:41:35 PM »
you're crazy. haah

agreed xD
i guess you could, as long as you dont cut any trace wires that are for the memcard


VoX

  • Guest
Re: PSP internal accessories ideas
« Reply #6 on: May 25, 2008, 11:24:14 PM »
Or you could cut the board in half and solder a memory stick slot and scratch off a bit of the track on the top of the WiFi board and solder to their corresponding point
« Last Edit: May 25, 2008, 11:29:56 PM by VoX »

Offline Gamer4life

  • Granny Spanker
  • *
  • Posts: 483
  • Post quality +0/-0
  • Gender: Male
  • I will be a Gamer until i die.
    • my own site please join and be active
Re: PSP internal accessories ideas
« Reply #7 on: May 25, 2008, 11:52:19 PM »
Or you could cut the board in half and solder a memory stick slot and scratch off a bit of the track on the top of the WiFi board and solder to their corresponding point
yeah maybe that could  be done and then you would have extra room 4 mods but wont have wifi

98% of teenage population has tried smoking pot if you're part of the 2% who hasn't copy & paste this into your sig

VoX

  • Guest
Re: PSP internal accessories ideas
« Reply #8 on: May 26, 2008, 12:02:19 AM »
I wouldn't count on what I said because there are several layers and you might wreak something. Just a thought though
« Last Edit: May 26, 2008, 12:23:38 AM by VoX »

Offline ApheX

  • Club AM VIP
  • Millennium Poster
  • *
  • Posts: 1094
  • Post quality +1/-0
  • Gender: Male
  • PSP And PSP Slim Case/Hardware Modder
    • ApheX MoDs
Re: PSP internal accessories ideas
« Reply #9 on: May 26, 2008, 03:16:31 AM »
Sounds like alot of work for gaining a small amount of space. (Not sure if this is true, but) could you use a slim battery in a fat? i know it prob wouldn't last long but the amount of space that you could get out of this would be great for adding a number of mods.

VoX

  • Guest
Re: PSP internal accessories ideas
« Reply #10 on: May 26, 2008, 04:14:47 AM »
Nope, the PSP slims battery doesn't work on the PSP phat

Offline ApheX

  • Club AM VIP
  • Millennium Poster
  • *
  • Posts: 1094
  • Post quality +1/-0
  • Gender: Male
  • PSP And PSP Slim Case/Hardware Modder
    • ApheX MoDs
Re: PSP internal accessories ideas
« Reply #11 on: May 26, 2008, 04:38:42 AM »
Nope, the PSP slims battery doesn't work on the PSP phat

Thats a shame, would have giving a modder alot of space to work with. :(

VoX

  • Guest
Re: PSP internal accessories ideas
« Reply #12 on: May 26, 2008, 05:19:54 AM »
Think out side the box, use an alternate power source, Hook it up to the battery's PCB and you got your self some room You've just got to find a small battery that has enough power

 

SMF spam blocked by CleanTalk
SimplePortal 2.3.5 © 2008-2012, SimplePortal