Author Topic: PSP External Dualshock Controller (Read 150800 times)

noah03ark · « **Reply #30 on:** May 28, 2008, 04:20:01 AM »

super awesome stuff

good work

Aricado · « **Reply #31 on:** May 28, 2008, 07:02:32 AM »

Keep going dude.
I still want to meet you or your soldering iron.
What soldering iron do you use?
I use a weller WM15L 15Watts and I need a new and thinner tip.
You are very good at soldering!! You're a master!

MadMax11 · « **Reply #32 on:** May 28, 2008, 11:02:28 PM »

Very clean and well done.
I think the reason that some people like F00f00's 4 usb connectors better is because they are semetrical. I know that there is not enough room to wire this connector on the top or bottom easily, but I think that's what would make this mod truly amazing.
Although, very well done. Did you use a dremmel to cut the hole in the trim? A scalpel?

VoX · « **Reply #33 on:** May 28, 2008, 11:34:05 PM »

He would have used a dremmel to cut the hole in his PSP

Luke · « **Reply #34 on:** May 29, 2008, 12:25:30 AM »

not necsarally

Quote from: VoX on May 28, 2008, 11:34:05 PM

He would have used a dremmel to cut the hole in his PSP

VoX · « **Reply #35 on:** May 29, 2008, 12:34:10 AM »

Between a scalpel and a dremel I mean

Blizzrad · « **Reply #36 on:** May 29, 2008, 03:48:24 AM »

*deleted

VoX · « **Reply #37 on:** May 29, 2008, 03:57:00 AM »

Where did you get the controller from? How much did it all cost?

Wedge · « **Reply #38 on:** May 29, 2008, 02:13:35 PM »

What did you do to get the wires around the golden wifi thing (whatever you call it)? did you go under it, pushing the golden thing closer to the power board?

robin1989 · « **Reply #39 on:** May 30, 2008, 11:25:44 AM »

congratz man your on psp-hacks and engadget

l0rdnic0 · « **Reply #40 on:** May 30, 2008, 11:30:00 AM »

Wow I tip my hat very, very clean!!!

Good work!

robin1989 · « **Reply #41 on:** May 30, 2008, 12:08:12 PM »

your on pspfanboy and hackaday now your doing well lol

also awesomely edited video
http://www.youtube.com/watch?v=nTDq2-jaEo0

Blizzrad · « **Reply #42 on:** May 30, 2008, 03:29:19 PM »

*deleted

Electro · « **Reply #43 on:** May 31, 2008, 12:02:05 AM »

NICE JOB DUDE!

I gotta say this is the best External Controller MOD I seen.

And I don't think it can get any better..

Unless U make a wireless 1.

ryan0 · « **Reply #44 on:** May 31, 2008, 06:57:52 PM »

Quote from: Electro on May 31, 2008, 12:02:05 AM

Unless U make a wireless 1.

WATISHHH!!!!! just kiddn dude brilliant mod i love it!!!!its 3 in the morning here in ireland so i better be off lol,SO CLEAN!!!would you mind drawing me a guide of where you trailed the wires on paint or something becase i tried something like this before but i couldnt get the psp closed lol

TaSlAyEr · « **Reply #45 on:** May 31, 2008, 07:11:07 PM »

god i want to do this

MaO · « **Reply #46 on:** June 01, 2008, 04:32:06 AM »

That's one hell of a nice mod, these are the things that make me want to mod my psp again.

VoX · « **Reply #47 on:** June 01, 2008, 05:17:04 AM »

How could you ever stop? Its things like these that will always keep you interested

Aricado · « **Reply #48 on:** June 01, 2008, 05:32:09 AM »

Quote from: Blizzrad on May 29, 2008, 03:48:24 AM

A switchable 15/30w iron from RadioShack, but I keep it set to 30w for almost everything. I get the tips for it at a local hardware store because their prices are much better, I usually switch between a chisel tip for desoldering, and a pointed tip for everything else.

I see. I just need a new tip and then I'm ready again to mod and make a cool pad
I wanted for so long to play a game at it's fool awesomeness!!
The tip I have now cost me 10euros and it's not that thin and a bit burned on the
end so I need to find a place with better,cheaper and thinner tips.
Thank you Blizzrad! You rule.

VoX · « **Reply #49 on:** June 01, 2008, 05:40:01 AM »

I've got to get a new tip too but the one I've got now will have to do. Its a little burnt at the top but added a bit of solder to it to get it good again.

Aricado · « **Reply #50 on:** June 01, 2008, 05:45:45 AM »

Quote from: VoX on June 01, 2008, 05:40:01 AM

I've got to get a new tip too but the one I've got now will have to do. Its a little burnt at the top but added a bit of solder to it to get it good again.

I can do the job with the one I have now but it's gonna be a bit hard and with bad soldering.
Though if I'm so very impatient I'll do it with my current tip and play all day with my new pad!!

VoX · « **Reply #51 on:** June 01, 2008, 05:51:40 AM »

lol, same here, I've already ordered a clear SCPH-1200 PS1 controller. When it comes, I'm going to be working non stop

Blizzrad · « **Reply #52 on:** June 01, 2008, 05:53:36 AM »

*deleted

VoX · « **Reply #53 on:** June 01, 2008, 06:05:14 AM »

Good infomation, I've been drawing diagrams and thinking about how I am going to route the wire inside the PSP. I've been collecting ports that have a resonable amount of pins too

robin1989 · « **Reply #54 on:** June 01, 2008, 12:45:07 PM »

i didnt realise this but your on gizmodo as well - i still cant get over how clean this looks. now thinking about it if you did this on a psp slim you got yoursel a very small ps1/ps2 style console

Cratos · « **Reply #55 on:** June 01, 2008, 03:09:51 PM »

i think im going to do this

Blizzrad · « **Reply #56 on:** June 05, 2008, 01:09:01 PM »

*deleted

TW1NKY · « **Reply #57 on:** June 06, 2008, 09:32:34 AM »

damn, that looks ridiculously clean, nice mod!!!

VoX · « **Reply #58 on:** June 06, 2008, 09:37:18 AM »

Looks good, I'm rerouting my wires a different way, but you put a lot of thought into it

FaT3oYCG · « **Reply #59 on:** June 19, 2008, 08:36:23 AM »

woop old thread bump

i would just like to ask a few questions:
1) how many of the pins on the connector did you use?
2) can i see some pictures of how you connected the wires to the board in the ps2 controller please

News:

Author Topic: PSP External Dualshock Controller (Read 150800 times)

VoX

VoX

VoX

VoX

VoX

VoX

VoX

VoX