Red Leds Help?

[gx4702]

Hi. Recently i did the trigger mods for the psp...i used a red led and a green led. both leds work (when tested seperately) I.e. with a battery
but when i soldered them to the psp only the red led lights up. (the positive voltage goes through red first then to green)
I tried the other way (Positive voltage goes through green first then red) and Only Green lighted up this time.
[i used a 10ohm resister also]
How can i make Both Green And Red Led Light up at the same time?
(Yes i did use the search button and i couldnt find it)

[4dP]

try not using the resistor if you can risk the leds

what are the specs of your leds

[Ch4rL13]

this in wrong section
and i think u got to use a seperate pwr source, using 2 dif color leds dont work on same pwr source

[4dP]

yes thats y i asked for the specs if the forward voltages are different than it shouldn't work

[gx4702]

the leds are 0603 SMT

(i tried not using a resistor - same effect)

[4dP]

the leds are 0603 SMT

(i tried not using a resistor - same effect)

well i meant more along the lines of mcd, forward voltage, etc

[gx4702]

Actually i got it lol i just soldered another red and took out the green

just one question or request - can someone show me how they placed their wires in the psp? i cant fully close my psp =\