PSP PHONE Beta Not final ...

[artyhacker2.0]

                                               Project (A+J) !!!BETA!!


1.This is only a beta project.
2.When i say i'm almost done i mean the wiring and blue print.
3.i just got all my info yesterday and will start working on the psp in two days i will take two to three weeks to finish so coalm down.

6.This psp is still going to be portable it's not going to be a brick.
7.If you have nothing good to say dont say it at all .

8. i came on this site to find out my problems and fix them and i  did with most of them.
9.Thanks to JWhiteLightning, Robotiks, and Bhawan. For helping i will most sertainly give you credit ounce done.

10. I will be uploading pics as soon as possible!


ok, I have the hardware part down and reading .



i HAVE TWO PHONES :

ONE: NOKIA 6682 <INCLUDES 50 GAMES>

TWO: PALM TREO <TOUCH SCREEN>






The canera which is on the back of the phone is going to go to the front of the psp

Which phone should i pick?





IF YOU CAN HELP US IN ANY WAY JUST PICK ONE OF THE OPTIONS BELOW :

PM ME.

EMAIL ME AT:   russianmialman@yahoo.com

OR JUST COMMENT ME WITH ANY QUESTIONS .

AND ALSO IF YOU HAVE ANY IDEAS ABOUT THE PROJECT , IT'S ALWAYS GOOD TO KNOW WHAT OTHERS THINK SO JUST COMMENT ME


THANKS

-ARTY , JADIN  .









The psp back (BACK WHEN NORMAL)  . THE PSP (FRONT WHEN NORMAL). 
THE MAIN SUPPLIES



NOKIA 6682



PALM TRIO (TOUCH SCREEN)







JABRA WIRELESS HEADSET



The Front Of the nokia.


The Back of nokia


It's going to be smaller XD.

Will have more pics soon

[JWhiteLightning]

Ummm... Where to begin? Ok, ill tell you straight off first that you arent going to be able to fit all that in there if that was your plan . Second, there is no way to currently connect you Ipod to the psp, although there is one in progress (its on the psp page, started by mongol). And you are going to need some major software to get the phone hooked up to the psp, i dont really know what you mean by getting the phone hooked up by the psp. I quiet honestly dont think there is anyone on this site (im not 100% though) that can make code to get you psp to communicate with the psp. And i just wanna check, do you know how to write anycode? :dntknow:

BTW, im not telling you your project is impossible, im sure if you attempt it you will get some great experience, but you are trying to climb a mountain here.

Oh, and as far as the phone choose goes, go with the nokia, it looks smaller.

And it looks like your kinda new to acidmods, welcome

[artyhacker2.0]

   thanks for the opinion but im not going to  just put the phone in there . lol ofcoarse its going to be to big. 

and the ipod i only ment the clickwheel i need to fix that lol

and i  agree the nokia is smaller .

and if you didnt know i will be takeing out the umd drive and i will have plenty room to work with and put in the mobo and the screen of the  nokia , and yes i do know how to make a code. but not as good as my friends  .   

the nokia has 50 games so it should be awsome.

any more ??? or opinions?

[JWhiteLightning]

Well, yeah, of course your gonna take the UMD drive out, but im just wondering, have you ever opened up the psp? even without the UMD drive there is not much room, You will probably have enough room, you may have to do a little bit of modification, but you should have enough room, and what do you wnat to use the ipod wheel for? If it is just to take over the function of some of the keys on the cell phone, then that will be very simple, as long as you are relatively good at soldering, but other than that it should just be a simple monitor of the contacts from the clickwheel to the phone contacts. But the thing i dont see, is why do you wnat to have the phone communicate to the psp? Please inform me. But yeah, other than getting the psp to communicate to the psp, this would be a fairly simple mod. Good luck, if you have any questions, i am willing to help or ask one of the other members, they will probably all be willing to help you!

[artyhacker2.0]

THANKS MAN, YOUR AN AWSOME MEMBER AND YEA I WANT TO USE THE CLICK WHEEL TO TAKE THE CONTROLS OF THE PHONE .

AND I MIGHT BE ABLE TO CONNECT THE PHONE TO THE PSP USING THE BLUETOOTH MOD. 

AND I HAVE OPEN THE PSP OVER 20 TIMES SO IM QUALIFIED LOL. 

[folklord36]

no you cant use bluetooth mod. bluetooth mod is simply a audio transmiter all it is cableable of is useing bluetooth head phones and speakers because its just a audio transmiter.no posible way to make it accept info and talk with phone.and click wheel to the phone will not be a simple soldering job either think how controls of a phone work you got the number pad and keyboard witch are all buttons and a phone has no mouse or pointiting device that you could simulate with the click wheel so touch function of click wheel is useless with out like a pic to read click wheel functions and send to phone witch like i said no mouse on phone so you would need like software to do that and fig out how the phone is going to read the clickwheel you cant just solder to buttons on phone in reality controling a phone with click wheel will be a super hard core mod alone theres a reason they just have keypads. as far as phone talking to psp you better know some hard core programers. i honestly dont see any of your mods being posible without you inventing lots of your own software and i dont think you and your friends are qualified no offence but what you plan to do has not been thought out verry well at all. as far as useing the cam in one of those phones to do the cam mod is basicly imposible you would need pic's and a whole new software other than the one for go cam. basicly take about 10 yrs of programming classes and practice then maybe some of this might be posible but it is all really unrealistic not to discourage you but maybe you should start out with simple mods and do lots of research to the posibility in your mods first. What do you want to acomplish with this mod? i dont see the point or goal of this mod. now if you make a nintendo ds like device with a psp and iphone where they are both just seperate devices in one nice custom case then thats a mod. but good luck you will need it  and keep moding and practice and research and welcome to acidmods

[artyhacker2.0]

HAHA YOU GOT MOST OF THAT ALL WRONG I SAID I WILL BE ORDERING A KEYBOARD THAT USES THE PHONES BLUETOOTH AND I HAVE TWO PARE OF WIRELESS HEADSETS THAT ARE IN MY POSSESTION WHICH I WILL USE TO TALK ON THE PHONE WITH THE CAM I WILL JUST EXPAND FROM THE PHONE AND SET IT TO THE FRONT I DONT REALLY NEED EXTREME PROGRAMMERS JUST GOOD ONES . THEN I WILL DO THE SCHC MOD FOR THE PHONES MEMORY.


AND THANKS FOR THE WELCOME AND THE LUCK I WILL NEED IT 

[folklord36]

what did i get wrong?well all the informaion is right just explaining why bluetooth wont work for psp and phone talking and why clickwheel wont work to control phone and why camera wont work to do the cam mod on psp. and you will need a hardcore programmer to write a pic code that can read the touch sensitive signals and convert to something the phone can read then alter all the phones software so be able to be controled with click wheel by some how makeing a pointing device capibility into all functions on phone or to write host and client software into phone and psp and most likely add a host hardware device.

[artyhacker2.0]

ok dude im not going to connect the phone to the psp i will only solder connections . so if you can give me some useful advice it would be nice. if you instead would help me with the solder points or anything else plz do.
and what i ment by the psp was using the headset to listen to music and watch movies the other set will be for the phone ONLY. i just need to know if you have any ideas on how to extend the camera from the back of the phone to the front where the screen will be.



dont double post

[folklord36]

umm lets see here well im sorry i cant help you on telling you how to extend the camera to the front as i have never taken those phones apart it should be pretty straight forward it will probably be a ribion cable going to cam cut it then use a needle to scratch traces and an exacto blade to make a spot to solder on the ribion cabe then do the same to the cable conected to the cam module and solder with a length of cable between the two to extend the reach of cam and you should be able to use one head set for both im not shure but if you have to use both you could make some head phones with both devices on it then a switch to go between the two input devices to the speakers for the head phones. as far as any pinouts on the psp i will help you with what i can what pinouts do you need?

[artyhacker2.0]

Thank you so much  thats what i needed.

 can  you help me with the soldering
i mean the phone to the powerboard i want to use the on botten on the phone to power it up i need to find out what connections i need to solder to get that result. i will have pics of the phones mother board soon.    i dont want it to power on when i turn the psp on.

[folklord36]

ok well most the time the end button turns phones off and on and its just a momentary button and if you make the end button turn the phone and psp on then you just solder the top two pins on the psp power board power switch to the mobo of phone where the button is scratch a trace to the button on phone before and after the button on mobothen solder those two pins from psp to the traces and the end button will turn the phone and psp on. i sugest you get a multi metter and you can test the pinouts your selfe and also make shure you soldered the right traces that only conduct current when button is pressed



also keep all discusion on this mod in this thread DONT SPAM OUR FORUM pls and thank you

[artyhacker2.0]

yea i got that already im sorry it was an accident .    and it wont happen agian

[4dP]

eh sounds cool i'm not entirely sure what your trying to do but go for it you'll might learn something

[artyhacker2.0]

thanks 

[RoBot1ks]

artyhacker2.0....How many volts does the nokia battery put out??

[Bhawan]

if ur nokia has an infrared port and supports symbian/sis files i can give u some softwares that may help or add to the functionality.... and any more games for nokia phone u want i hav those too ... pm me if u need any.

[artyhacker2.0]

3.7 v exactly

[artyhacker2.0]

yea that would be nice if i could get that software and games what funtionalitly does it add exactly??? 

[JWhiteLightning]

Ok, ive been talking to this guy a bit because i wasnt sure what he was trying to do. After talking a bit, i found out that he wanted to write the software to make the psp comunicate to the phone so he could get his 2gb sd card to read on his psp. I quickly got him to change his mind to the internal SDcard mod. So no more software. Now he is just pretty much putting a phone in the back of his psp, with the internal sd card mod instead of writing whole new firmwares, etc for a meesly 2gb. Good luck!!!

[Bhawan]

yea that would be nice if i could get that software and games what funtionalitly does it add exactly??? 

it can add stuff like universal remote and mmm wireless internet browsers like opera for cell phone, anitheft, music player and loads of other stuff which is almost like homebrew but its for cell phones.

[artyhacker2.0]

omg i wanted to right completly new firmware to do that !

can i get that software some time soon

when ever you can is good   


thanks

-arty, jadin


Great members on this site willing to help   A++
 
site.   

[nez]

good luck man on this mod it will be nice once done.

[artyhacker2.0]

thanks GAMEKING21    I will need the luck.

and it's going to be nice thats for sure.

[VoX]

Stick to it dude! You can get it done

[artyhacker2.0]

thanks hopfully i will have all the reasources to do this.

[VoX]

If you need any information then feel free to contact me on MSN at im_the_jesus_of_suburbia@hotmail.com

[Bhawan]

the pm thing is too slow so here is my msn padabhawan@hotmail.com  i am willing to help you with all the softwares u may need

[artyhacker2.0]

the pm thing is too slow so here is my msn padabhawan@hotmail.com  i am willing to help you with all the softwares u may need

Thanks that software was really helpful well about 40% of it was the other 60% i already had

 

If you need any information then feel free to contact me on MSN at im_the_jesus_of_suburbia@hotmail.com

ok,  thanks i will i have some other things i want to ask you.

ttyl

 
[size=25pt I WILL BE STARTING A NEW MOD IN THREE WEEKS IT'S GOING TO BE AWSOME [/size]


DO NOT TRIPLE POST USE THE MODIFY BUTTON

[MARIOPARTY53]

Dude, Your never Going to get the ipod click wheel in there
Its like impossible

I doupt you be able to do this, thats alot to stick in a psp, Just keep those handheld seprat!!!!
If you stick it in one system, and if it cant fit in your pocket....You killed the idea of a portable psp if it comes out to big

[artyhacker2.0]

lol i know but it will all fit in there i assure you .

and the click wheel will be under the wifi board

[JWhiteLightning]

Any pics on progress?

[MARIOPARTY53]

lol i know but it will all fit in there i assure you .

and the click wheel will be under the wifi board

How are you going to get it to function? I takes alot of programming and soldering

[FaT3oYCG]

this will suck in my opinon.

i dont think its really a psp mod if nothing is hooked up to the psp, the only psp releated thing is that your shoving it all in a psp. it would be like me taking an xbox and putting a ps2 in it, you can use them both att he same time, but it would weigh lots and just wouldnt work.

well thats just my opinion, i would also like to add that you can use an ipod scroll wheel to controll the psp, but you would have to mod the scroll wheel to work with the psp's hardware.

Thanks

F@T3oYCG

[F00 f00]

Wow, what a horrible thread.

I think its a pretty cool idea to put a phone in the psp. I wouldnt bother with anything else though. I am sure it would fit. As for not posting pics, thats a bit iffy but my advice to people that want pics that arnt appearing is stop posting in the thread and just let the thread die.

Triple/double posting. Dont do it. Its irratating.

Using caps. Never do it, I've banned people for that before.

@pspkicks. That is not the way a mod should act. Sort it out.

[F00 f00]

I really dont want to lock this thread. Please stop bumping it untill theres an update about the project.

[Blazinkaos]

my bad F00 f00

[robin1989]

hey - i wish you luck arty in your mod and hope you get it done or at least partly done as it would be a very kwl mod.

now for a slight rant that applies to the whole site as i have just spent several mins reading posts in this topic and deleating a lot of them as im discusted.

1 - pleas dont double post or use caps. use the edit button first and check you havnt pushed caps lock.

2 - if he hasnt posted pics either make a polite little post to ask for pics or let the topic die, if someone has already asked just leave the topic.

3 - if you havnt got anything good to say or constructive then dont say anything at all.

4 - if your a staff member acked like one. you are the face of the site and if you flame and post unusful post that arnt nice, helpful or constuctive then your really in the wrong. and if i see more staff doing that they will be demoted as there is always someone who will replace you.

5 - and most of all ive probably already said this dont flame as you scare people away - we want to get more people who mod to this site and we want to make the nice friendly people feel welcome not have it as a place for internet yobs and hoodies to hang out in, use other sites or make your own for that sort of stuff.

6 - most importantly have FUN and enjopy yourself be kind to others and get kindness back, respect others and get respect back etc etc

[/end rant]