Hi there,
now I've got another big problem: I wanted to install a PVU into my DS. Now, after BT+ and a ground is connected, there's a really strange issue: If I boot the DS, the Green power LED lights up and stays. The DS doesn't turn off. But the only thing I get is this freaky LED, nothing else. My R6 access led does light up for a part of a second, so it gets power. But no screen is responsing, and even if I disconnect the upper screen, the LED lights up but nothing else happens. It doesn't turn off as it should when the screen is disconnected.
Before we connected + and - of the PVU to BT+ and a ground on the board, everything worked.
If I should measure any points, no problem, there's a Oscilloscope and two multimeters here.
Anyone an idea what could be the issue?
Thanks for any help!
Florian
EDIT: I forgot to put the Wifi-module back to its place, now it works. Was that really an issue with that?
