Author Topic: Wiredinput Installation Diagrams" RapidFire Dual Triggers Old/New Board Style" (Read 66986 times)

KingMike_OS · « **Reply #30 on:** August 23, 2008, 03:36:41 PM »

just run a ground for each switch to the same point that the chip ground goes .. they all the same so they can be conected to each other ..
or you can run them one by one so you have 3 wire on ground one for the chip ground pin 8
one for the right switch ground and one for the left switch ground

SPYGOAT · « **Reply #31 on:** August 24, 2008, 04:14:17 PM »

Quote from: KingMike_OS on August 23, 2008, 03:36:41 PM

just run a ground for each switch to the same point that the chip ground goes .. they all the same so they can be conected to each other ..
or you can run them one by one so you have 3 wire on ground one for the chip ground pin 8
one for the right switch ground and one for the left switch ground

Mike, thanks for all your help with my delivery the other day (this is Tom in Seattle), I appreciate it! I ordered a few more chips the other day!

A quick question on the ground. I have done 6 of these already and have soldered one wire to the ground point and to one pole on the switch. Then I soldered a wire from the same pole on the switch to the pin on the chip. I found it was easier to solder multiple wires to the switch instead of the board or the chip. THe mods work great! I use a different switch because I like the bigger buttons, here are a few pics of some of the controllers I have done. Most of them I just did the rapid fire on the right trigger.

kenoman · « **Reply #32 on:** August 25, 2008, 10:15:16 PM »

nvm fixed

icesharkpr · « **Reply #33 on:** August 26, 2008, 09:16:17 AM »

How can I make the buttons be the rapid fire insted of the triggers with this chip. I want to make the controller work like in the first video where you have to keep pressed the left or right button to rapid fire and when released it stops.

I installed one with the triggers and it works awesome, I want to test how it works with the other configuration.

One crazy idea... what about being able to use the sync button to change the configuration between trigger rapid fire and button rapid fire.

Any help will be appreciated

FrankieB4 · « **Reply #34 on:** August 26, 2008, 11:17:03 AM »

Horay! So I have made all five kits that I have ordered from you, and they all work! I just have a few questions. When I use this in halo 3, it works great for the carbine and battlerifle and such, but there are videos where i makes the needler and ghost shoot much faster and have better accuracy. My needler gets more accurate, but also only shoots in pulses and sometime shoots fine but is slower than normal. Any reason for any of this. It works great in cod4 though!

icesharkpr · « **Reply #35 on:** August 26, 2008, 01:06:33 PM »

Quote from: FrankieB4 on August 26, 2008, 11:17:03 AM

Horay! So I have made all five kits that I have ordered from you, and they all work! I just have a few questions. When I use this in halo 3, it works great for the carbine and battlerifle and such, but there are videos where i makes the needler and ghost shoot much faster and have better accuracy. My needler gets more accurate, but also only shoots in pulses and sometime shoots fine but is slower than normal. Any reason for any of this. It works great in cod4 though!

I noticed the same thing. It must be that those chips on the videos where programmed by different people and the pulse rate is different. I have tried one of the chips that are sold on ebay and I found them to be much faster on things like the needler and the ghost but are not flexible on the installation and dont work well with important weapons like the Battle Rifle and the Assault rifle. Álso you can only use the buttons on the back of the controller, I have found no way to do a sleeper install or a trigger installation with those.

I love the flexibility the chips on AcidMods give me but it is a sad tradeoff to not be able to take advantage of those weapons on Halo 3 once you know what can actually be done.

KingMike_OS · « **Reply #36 on:** August 26, 2008, 02:19:06 PM »

In the process to fix that the new kits will have 3 modes .. so one mode will run COD4 Code and on other mode Halo 3
so they are not Conflicting with each others .. and mode 3 will be for other game.

In order to get dose guns fire Faster i need to lower therate of fire since halo 3 rate of fire is cap and coded in the game. buy doing that COD4 will be slower. ro FIx it each mode has its own rate of fire.

This is Still in the test Stage and ETA Unknown at this time.

IRISH SMURF 300 · « **Reply #37 on:** August 30, 2008, 11:25:00 PM »

how did u get the led working cause i never no if mine is on or off if you could tell me how that would b great
thanks

KingMike_OS · « **Reply #38 on:** August 30, 2008, 11:50:35 PM »

The LED is on a diff chip and diff code .. its still in a test stage .. will be out soon ..

Serb · « **Reply #39 on:** September 02, 2008, 10:20:47 PM »

Hey KingMike i received your 2nd chip that u sent me a few weeks ago, installed it and it works great.. Totally unsure about what happened with the first chip :S Anyways im really curious... this Halo 3 stuff you guys are discussing, how does it actually work in halo 3? the current rapidfire controller that i have doesnt really affect the BR except making it shoot right after it shoots the 3 br bursts?

Please elaborate

(BTW i ordered one of these kits from you just to try it on another controller, i love modding these things, Electronics class got the best of me!!, KEEP UP the awesome work, this kind of things is just what my engineering classes are missing hehe)

kenoman · « **Reply #40 on:** September 03, 2008, 10:40:47 PM »

Quote from: KingMike_OS on August 30, 2008, 11:50:35 PM

The LED is on a diff chip and diff code .. its still in a test stage .. will be out soon ..

you need to get these mass produced lol i hate not knowing having to check if mines on of off

Blazinkaos · « **Reply #41 on:** September 04, 2008, 09:49:08 AM »

So i need the PIC 12F683 chip to do this sleeper mod. The only place to buy it is of acidmods if im correct.

jayzmatrix · « **Reply #42 on:** September 04, 2008, 07:24:31 PM »

hey i was just wondering if someone could help me with adding a potentiometer or anything els that would let me change the rapid fire speed? thanks.

kenoman · « **Reply #43 on:** September 09, 2008, 11:26:37 AM »

so i just bought a chip and going to install it sleeper and want to make sure that their is no way i can make it light up a light to indicate that the chip is on

so i was thinking cant i just put the long blue wire to the player 3 on the rol and the white one with the yellow wire? it makes sense to me im sure i could try it and find out might need a resistor tho could you guys help me before i try?

nope it doesnt work some one try it with a resistor

chunkyyluvr5 · « **Reply #44 on:** September 15, 2008, 07:21:50 PM »

For the "Sleeper" mod does it rapid fire both triggers or just one... i only want i t to rapid fire the right trigger. is there a wire i have to disconnect or is it already only one trigger.

Blazinkaos · « **Reply #45 on:** September 15, 2008, 10:28:56 PM »

nonono it can set up for right or left... u dnt have to use the left

Serb · « **Reply #46 on:** September 18, 2008, 04:35:19 PM »

took less then a minute to install, awesome job

kenoman · « **Reply #47 on:** September 21, 2008, 02:00:57 PM »

ok guys i now need some help i was trying to install the rf on the triggers and use the buttons to turn them on/off well i got it to work and was playing with it last night but this morning i noticed that i left the rumble motors out so i installed them and now my controller doesnt work any reasons

Blazinkaos · « **Reply #48 on:** September 21, 2008, 09:58:12 PM »

u sure u installed them right..

deathbypie · « **Reply #49 on:** September 22, 2008, 04:49:17 PM »

hello, i ordered 2 of the https://acidmods.com/ShopUSA/product_info.php?products_id=79 based off the diagram the black wire shoud go to each trigger but there is only 1 wire. Also, there are 2 wires attached to each button, so am i supposed to attach them to the other prongs of the button?

Blazinkaos · « **Reply #50 on:** September 22, 2008, 10:56:54 PM »

ok bro very simple the black wire u just wire one wire from trigger to the other then u take another wire solder to the trigger and the same spot as the wire to the chip.

kenoman · « **Reply #51 on:** September 23, 2008, 09:29:11 AM »

Quote from: Blazinkaos on September 21, 2008, 09:58:12 PM

u sure u installed them right..

yeah my problem was the black wire going to the bottom/middle part of the board i didnt see that but fixed it thanks

Blazinkaos · « **Reply #52 on:** September 23, 2008, 09:36:22 PM »

ok good to go..

IRISH SMURF 300 · « **Reply #53 on:** September 25, 2008, 07:30:24 PM »

Quote from: KingMike_OS on August 30, 2008, 11:50:35 PM

The LED is on a diff chip and diff code .. its still in a test stage .. will be out soon ..

do u sell those chips

KingMike_OS · « **Reply #54 on:** September 25, 2008, 09:58:52 PM »

3 mode with led is out you can preorder your new kits Now with led options on both type of controller

kenoman · « **Reply #55 on:** September 26, 2008, 10:17:29 AM »

is the directions different to install? if so when do you think youll put those up?

IRISH SMURF 300 · « **Reply #56 on:** September 26, 2008, 08:29:07 PM »

i orderd another chip from u will that b updated

kenoman · « **Reply #57 on:** September 27, 2008, 11:11:50 AM »

not until they ship them that will be like october

deathbypie · « **Reply #58 on:** September 28, 2008, 05:55:42 PM »

Hey, i bought 2. I have done this mod before with other kits and it has never been this hard here is the instructions for the other mod kit http://eternalgamers.org/rapid.pdf .... i have done everything as it says and for my dual rapidfire, the left switch turns on the left trigger..... and the right does nothing, pleas help me out. here are some pics: http://eternalgamers.org/1.JPG http://eternalgamers.org/2.JPG

kenoman · « **Reply #59 on:** September 28, 2008, 07:37:10 PM »

the chips are confusing yes but easy to install if you have patience just follow the instructions to a T and youll be good

News:

Author Topic: Wiredinput Installation Diagrams" RapidFire Dual Triggers Old/New Board Style" (Read 66986 times)