Author Topic: ** Yet A Nother Way To Rapid Fire (Read 51041 times)

PspKicks316 · « **Reply #60 on:** August 08, 2008, 10:48:04 AM »

Cool, thanks. As long as it's up by Monday, I'm good XD haha. Well, good luck finding another timer. I'll be looking out, too.

SillyNuts · « **Reply #61 on:** August 08, 2008, 11:00:10 AM »

ight iv got to get back to work my lunch is over.. ill see what i can do guys and im also looking at a few other ways . as allways

illusionistpro · « **Reply #62 on:** August 08, 2008, 12:24:21 PM »

question, i know in the video you say .01uf cap, but the pics all day .1uf, does it matter which you use?

Crazy Germans · « **Reply #63 on:** August 08, 2008, 12:30:16 PM »

Quote from: illusionistpro on August 08, 2008, 12:24:21 PM

question, i know in the video you say .01uf cap, but the pics all day .1uf, does it matter which you use?

DO NOT USE THE PICS POSTED FOR THIS METHOD. The pics that were posted are for another method with a different 555 timer. Follow what's on the first page for this method. The pics are of a completely different method

bill16504 · « **Reply #64 on:** August 08, 2008, 12:40:26 PM »

I just removed those pictures so people won't mix and match parts. I thought posting them would be better than Sillys drawing, as it's the same layout and the close up gave good detail.

AHHHH... but too much confusion.

@ Sillynuts

Do you got a vid of your mod in Halo 3? Will yours work as good as Mikes? Mine works good in everything but H3. If yours works, I'll edit my thread and point it here. Also, you should add the Radio Shack part numbers to your op.

SillyNuts · « **Reply #65 on:** August 08, 2008, 12:49:31 PM »

yes it works as good as mikes and ill make a vid of halo 3 soon. and i added all the part numbers to the first post

Crazy Germans · « **Reply #66 on:** August 08, 2008, 01:01:57 PM »

Quote from: SillyNuts on August 08, 2008, 12:49:31 PM

yes it works as good as mikes and ill make a vid of halo 3 soon. and i added all the part numbers to the first post

yes! That's all I needed to know. I'm goin out to get the stuff now.

And btw, do mike's work on all games? Or just CoD4 and Halo3?

SillyNuts · « **Reply #67 on:** August 08, 2008, 01:05:12 PM »

Rem. guys / girls use new batteries / powerpack the lower the batteries the more lag ( the slower it shoots ) just like kingmikes chips

Blazinkaos · « **Reply #68 on:** August 08, 2008, 02:34:14 PM »

Quote from: SillyNuts on August 08, 2008, 03:12:48 AM

wait do you want to see kingmikes sleeper or my vid ?

Dnt mater unless urs is easier to understand...

illusionistpro · « **Reply #69 on:** August 08, 2008, 03:52:16 PM »

I think a better pinout diagram along with that video would be nice. Maybe just correct the first post. I think we can all agree that the pin numbering is off. I just put one together and had a few issues, so im figuring the diagram is throwing me off. I followed the text instructions and when i turn on my controller and start up halo, it starts unloading my clip, reloads, more auto fire. When i pick up a rifle it fires off one thats it...suggestions on what is wrong? ALso using an old style wireless if that matters.

SillyNuts · « **Reply #70 on:** August 08, 2008, 04:40:30 PM »

the dig. is right kingmike and others had no prob doing it man ill make a nother vid when radioshack gets the chips and ill post it with vid. just follow it as it says and it works no problams make sure you have the right stuff

my radioshack is out of the 555cn timers so kingmike is going to make it and post the vid of it working for me tonight

watch for hes post

illusionistpro · « **Reply #71 on:** August 08, 2008, 06:41:30 PM »

Alright nuts, i got it working, i put a resistor on 1/2 vs 7/8. It seems that in halo you do need to use a momentary switch otherwise itll be rapid firing the entire time, even in the menus which brings your selection to the bottom. If there is another way please share.

Blazinkaos · « **Reply #72 on:** August 08, 2008, 07:33:19 PM »

Ight silly..
Does mike have thread out in the lobby with his video,,or do i have search..

KyleP · « **Reply #73 on:** August 08, 2008, 07:56:51 PM »

so when the battterys are kinda old does it still shoot just as fast

SillyNuts · « **Reply #74 on:** August 08, 2008, 07:59:53 PM »

no not unless thay are full you can use a plug and play charge kit works good

mike should be posting in here i think

Blazinkaos · « **Reply #75 on:** August 08, 2008, 08:15:44 PM »

Ight ill keep an eye out for it..

dngleberry · « **Reply #76 on:** August 08, 2008, 08:37:10 PM »

hey, sillynuts
you are the man i followed your instructions that you gave me step by step. this process was as simple as it gets, everything was correct and it works awsome as you noticed. the only problem that i had was not the 555CN timer IC chip it was the 1K res:271-1321 it seems I can't get it where i live in tennessee. but i want to say thanks for helping me over the headset online on it all from helping me find that chip in a C-B that i had to the step by step instructions again you the P.I.M.P. see you online

dingle

P.S. to all the non belivers this works and is so sweet

SillyNuts · « **Reply #77 on:** August 08, 2008, 08:39:53 PM »

cool thanks man ... that is a friend on xbox live i told how to do this mod over the headsit and he got it right first time he ripped the 1k res out of a cb .. lol and he didint use a breadborad .. have fun with it dingle

Blazinkaos · « **Reply #78 on:** August 08, 2008, 08:43:43 PM »

Nice you really are good at giving instructions...

jhyphinwill · « **Reply #79 on:** August 08, 2008, 09:23:50 PM »

Im having trouble getting mine to work. I have all the exact parts from radioshack as you mentioned. I tried it 2 ways with your numbering from the first image and no luck, then again with the same instuctions but using the pin numbers from this scematic off of the 555CN box.

could you look at my board and see if you can tell where I went wrong.

Also does this work on the new style controller? could someone point out a good + and - to use, thanks.

Blazinkaos · « **Reply #80 on:** August 08, 2008, 09:34:10 PM »

thats a different type of motherboard...
maybe that y... but idk im not positive silly may be able to answer ur question on that..

SillyNuts · « **Reply #81 on:** August 08, 2008, 09:51:33 PM »

Quote from: jhyphinwill on August 08, 2008, 09:23:50 PM

Im having trouble getting mine to work. I have all the exact parts from radioshack as you mentioned. I tried it 2 ways with your numbering from the first image and no luck, then again with the same instuctions but using the pin numbers from this scematic off of the 555CN box.

You don't have the right timer, because there are no schematics that come with the box.

jhyphinwill · « **Reply #82 on:** August 08, 2008, 09:55:12 PM »

I have the 555CN Timer IC Part No. 276-1723 from radio shack, as listed in the first post, here is the back of my package with part no.

SillyNuts · « **Reply #83 on:** August 08, 2008, 10:37:23 PM »

o i see the prob wrong breadborad...

jhyphinwill · « **Reply #84 on:** August 08, 2008, 10:43:57 PM »

im doing another now, on a different board. are the pin numbers for your mod, correct in your first post or should i follow your directions with the pin numbers off the scematic, thanks

illusionistpro · « **Reply #85 on:** August 08, 2008, 11:06:52 PM »

Quote from: jhyphinwill on August 08, 2008, 10:43:57 PM

im doing another now, on a different board. are the pin numbers for your mod, correct in your first post or should i follow your directions with the pin numbers off the scematic, thanks

Your job looks good, if it were me, id try and solder up some of those contacts, they look a tad on the weak side to me.

jhyphinwill · « **Reply #86 on:** August 08, 2008, 11:14:30 PM »

Quote from: illusionistpro on August 08, 2008, 11:06:52 PM

Your job looks good, if it were me, id try and solder up some of those contacts, they look a tad on the weak side to me.

thanks, yea I'll fix it up once i get it to work lol just failed my 4th attempt......

jhyphinwill · « **Reply #87 on:** August 08, 2008, 11:37:54 PM »

I found one difference on my part. My 1K resistor is part no. 271-1339 1K Ohm 1/2W 5% Carbon Film Resistor Vs. sillynuts 271-1321 1K Ohm 1/4 Watt 5% Tolerance Carbon Film Resistor.

would this matter?

SillyNuts · « **Reply #88 on:** August 09, 2008, 12:19:11 AM »

yes it needs to be 1/4 watt 5% tol.

Blazinkaos · « **Reply #89 on:** August 09, 2008, 12:26:57 AM »

Man hes going through a pain to get this done his 4th time ouch...
Oh no double posting us the modify button....

News:

Author Topic: ** Yet A Nother Way To Rapid Fire (Read 51041 times)

illusionistpro

illusionistpro

illusionistpro

illusionistpro