help a noob out....

[dmkmarlonsparda13]

im new to psp hardware modding. i saw that alot of people have put leds in their psps and i want to do it 2.  the only thing is that i want the leds to go on when the hold switch is on but i cant seem to find any good tutorials on it.

if anyone cud help i would rellly appreciate it

[ProperBritish]

OMG

SEARCH!

[Jumbo]

http://www.youtube.com/watch?v=0Nt3jNnDqKw

Ok.

The Hold Switch Part mush be cut and then the last leg on the switch is ground.



You will need 2 SMD Leds usually 603
Can be found on Ebay

Also needed-
15-20 Watt Soldering Iron
30 AWG Kynar Wire
Rosin Core Solder
Rosoin Flux

Most found at Radioshack.

And yes Proper i agreee but i feel like being nice today lol

[dmkmarlonsparda13]

lol sorry and thanx 

[rceckspurt13]

would a 30W soldering iron be too high? That's all I have now and I think it should be ok as long as you don't hold it on too long. I thought I'd ask the ones who have done it bfore.

[folklord36]

I use 60 watt!

[Jumbo]

I use a 30 too.


The only thing is the higher the wattage the faster it can ruin stuff. So if you think you are good at soldering its fine.

[Sanctus]

does this way require any resisters?

[gx4702]

yesh any leds Except Blue, White and UV (when using 3V) need Resistors

[Sanctus]

yesh any leds Except Blue, White and UV (when using 3V) need Resistors

ok thanks my blue leds ill be ok then

[Jumbo]

yesh any leds Except Blue, White and UV (when using 3V) need Resistors

You learned well, you learned well... LOL

But ya.

[bryan226]

Hold dont work after this?^^

-bryan

[Jumbo]

Hold dont work after this?^^

-bryan

Dont Bump Old Topics.

And Yes. It is disabled.