« previous next »
Pages: [1]   Go Down

Author Topic: PSP screw problem  (Read 2864 times)

Offline Sanctus

  • Acid Modder
  • *
  • Posts: 606
  • Post quality +1/-0
  • Gender: Male
PSP screw problem
« on: August 17, 2008, 11:00:57 PM »
Hey. One of my screws doesn't seem to be going in properly. I screw it in and it stays in the hole but it doesn't hold the faceplate on like it should(theres a gap like it would be without having that screw on). It's the one behind the battery at the top. Do you have any idea how to get around this/ how to fix it? If thats even possible. Thanks
Logged

Offline Tri-edge

  • I found Nemo!!
  • Around the block
  • *
  • Posts: 2381
  • Post quality +4/-0
  • Gender: Male
  • Azure knight
Re: PSP screw problem
« Reply #1 on: August 17, 2008, 11:37:54 PM »
it sounds like you have stripped the thread in the hole. you should order a new faceplate, the other methods will make it so it will be extremely hard to open again.
Logged

Offline Sanctus

  • Acid Modder
  • *
  • Posts: 606
  • Post quality +1/-0
  • Gender: Male
Re: PSP screw problem
« Reply #2 on: August 18, 2008, 03:41:26 AM »
Quote from: dslitemodder on August 17, 2008, 11:37:54 PM
it sounds like you have stripped the thread in the hole. you should order a new faceplate, the other methods will make it so it will be extremely hard to open again.

I think it's my backplate because I have another faceplate and I still have the same problem with it. I used multiple screws too. I will probably buy a new case, but just for further knowledge, can you tell me the methods to keep it shut even though it would be hard to open again. Thanks for the reply :)
Logged

Offline Tri-edge

  • I found Nemo!!
  • Around the block
  • *
  • Posts: 2381
  • Post quality +4/-0
  • Gender: Male
  • Azure knight
Re: PSP screw problem
« Reply #3 on: August 18, 2008, 06:46:04 AM »
superglue the screw and screw it in?
Logged

Offline MykR0

  • Chief squatting Hard
  • *
  • Posts: 27
  • Post quality +1/-0
  • Gender: Female
  • mini me says?
Re: PSP screw problem
« Reply #4 on: August 18, 2008, 10:07:17 PM »
you can use locktite..i use that alot for stripped threads
Logged
-Projects done-
     psp slim
-Current Project-
        Wii
Neelix:  “Coffee, anyone?  Captain?”  Captain Janeway:  "No thanks.  I've had enough.  One more cup and I'll jump to warp." 01100110 01110101 01100011 01101011 00100000 01111001 01101111 01110101 ^translate me :)

Offline Sanctus

  • Acid Modder
  • *
  • Posts: 606
  • Post quality +1/-0
  • Gender: Male
Re: PSP screw problem
« Reply #5 on: August 18, 2008, 10:40:33 PM »
Quote from: MykR0 on August 18, 2008, 10:07:17 PM
you can use locktite..i use that alot for stripped threads

Whats a locktite? If you mind me asking
Logged

Offline Slim Hacker

  • Mr PS3
  • Millennium Poster
  • *
  • Posts: 1140
  • Post quality +0/-0
  • Gender: Male
Re: PSP screw problem
« Reply #6 on: September 21, 2008, 06:25:53 AM »
lock tite is an epoxy that is good for holding that type of stuff in i have the opposit of you i screwed it in and it wont come back out :(
Logged

Quote from: Jumbo
I herd you like stealing quotes ey?

Offline Sanctus

  • Acid Modder
  • *
  • Posts: 606
  • Post quality +1/-0
  • Gender: Male
Re: PSP screw problem
« Reply #7 on: September 21, 2008, 09:29:08 PM »
Quote from: psp slim hacker on September 21, 2008, 06:25:53 AM
lock tite is an epoxy that is good for holding that type of stuff in i have the opposit of you i screwed it in and it wont come back out :(

Yea I have a  few of those in my phat lcd cage.

This thread is probably to old to be posting in tbh dude...
Logged

Offline psp339

  • Millennium Poster
  • *
  • Posts: 1371
  • Post quality +0/-0
  • Gender: Male
Re: PSP screw problem
« Reply #8 on: September 21, 2008, 11:53:39 PM »
I had this same problem on a PSP phat. The faceplate screw will not screw in. Just have to change the faceplate and the problem is solved.
Logged

Offline Sanctus

  • Acid Modder
  • *
  • Posts: 606
  • Post quality +1/-0
  • Gender: Male
Re: PSP screw problem
« Reply #9 on: September 24, 2008, 02:06:20 AM »
Quote from: psp339 on September 21, 2008, 11:53:39 PM
I had this same problem on a PSP phat. The faceplate screw will not screw in. Just have to change the faceplate and the problem is solved.
But that is kinda a pain. Do you think there's some sorta drill out there that can remake the stripped inside.
Logged

Offline psp339

  • Millennium Poster
  • *
  • Posts: 1371
  • Post quality +0/-0
  • Gender: Male
Re: PSP screw problem
« Reply #10 on: September 24, 2008, 02:09:14 AM »
Quote from: Sanctus on September 24, 2008, 02:06:20 AM
But that is kinda a pain. Do you think there's some sorta drill out there that can remake the stripped inside.
It was not a stripped screw. It was that the faceplate's screw hole got messed up so the screw wont screw in.
Logged
Pages: [1]   Go Up
« previous next »
 
SMF spam blocked by CleanTalk
SimplePortal 2.3.5 © 2008-2012, SimplePortal