razor x question

[longcat1]

ok, i figured out how to assemble the spring nub but is there a way to stick the razorx to the nub because the spring causes the board to pop out.

[4dP]

balloons rubber bands elastic

[anthonyta]

Do you mean in the sense of keeping the casing together , tight with the board?

if so

I find melting the plastic legs onto the razor board, and then hot-glueing together works best, or you could use blue tac

yup

[longcat1]

ooooo ok ill try thanks

[longcat1]

okay, now i have a problem. i went 2 solder the razor board but when i used iron and wire, after it harden, it fell off with the litte pad. so i soldered directly to the dot and it made that fall off. i used flux and i have soldered many things befor but this takes the cake, and my razor board...