New psp laptop progress pics

[folklord36]

[Tri-edge]

is that screen hard wired?! THAT'S INSANE!

[VoX]

I am guessing so, Big props to any body that can solder on a .5 mm pitch. Very good job

[socomhacker239]

what do you mean hard wired?do you mean instead of the cable he solderd wires? if so damn thats pretty hard congrats thats beatiful work 

[Jumbo]

what do you maen hard wired?do you mean instead of the cable he solderd wires? if so danm thats pretty hard

Yes.

Sweet job Folk!!!!

Cant wait to seen it done!

[MARIOPARTY53]

its Hard to solder wire to a psp screen, Get flux, Place solder and attac wire, It takes 30 mins though, and props for doing it!

[DUKE]

no point to this if the key board doesn't work, hopefully you can get the the pic program form cyber

[Jumbo]

no point to this if the key board doesn't work, hopefully you can get the the pic program form cyber

You mean Lordnico?

And lordnico is sharing the files....

[gr8npwrfl]

There are a bunch of us working on the bugs

[folklord36]

He he I have the files already and PIC programmer I plan to flash tonight and more pics tonight maybe, 30 min no way this is a good 2-3 hr job for me including scratching multimeter testing because the wires arent color coded and cuting and soldering wire and yes it is very tedious one of those things where 1 mistake can cause you to have to completely restart.


Thanks alot guys for the support I will need it!

[GhoSt]

sweet work folky, can't wait to see more.

[everlasting_will]

Very good work folk.
Well in my personal opinion if it work with thin magnet wires, perfect cause they are thinner than kynar. I checked the other day the power consumption of the lcd and if i remember well it was under 50mA (may be i am wrong) so don't think that would be a problem for those cables.
In any case i would have used a single ffc, i have one of 51 lines so it could be cut to fit the 40 pins of the screen, it can be directly attached to the lcd plug in the mobo, and it could be joined to the original lcd cable soldering at it another plug (and plugging it  ), so i think that would have been the cleanest and the toughest way. If your ways work and are seccure, i mean no soldering will pop up with the movement of the screen, then perfect.

[folklord36]

I went with magnet because come applications it makes things easier plus it makes the over all mass of wire is significantly less and management simpler also I simply didnt have enough well it would be about all the knyar I have. Ya I figured that magnet will cope with anything the psp can throw at it not high amperage we are dealing with here and I only used 1 power and I get no heat from that line at all. the top houseing has been cut just cleaning it up and assembling  I may get around to attaching it tonight havent completely figured that part out yet.

[folklord36]

soldered a ZIF connector to the FFC and pluged in another cable and viola! updates will come fas now the project has been revived!

[Sanctus]

That's awesome. I always wanted to see this completed fully.

[loxel]

so THATS what the secret was :P lmao

[folklord36]

Yep the project is fully in progress again I have most parts allready just need to finish my slim and ill be working on this only once thats done should be completed in less than 2 months.