------R trigger not workin for me--------

[m@DDm!k3]

well i was fixin up another rapidfire nochip controller when i noticed that the r trigger didnt fir or the modded button i think the problem might be that i couldnt of burnt a the path to the point where u put the second wire for the trigger what shud i do thx

[buickgnx]

i had that problem with 1 of my mods. all you have to do is look at were the three pin thing is. . make sure there is not a bridge between the pins circled.

[m@DDm!k3]

no there isnt i think its the path to the second pn though got burned off sometimes it shoots out of random almost as the resposce is delayed...

[m@DDm!k3]

*bump*

[dansterdan]

this happen to me make sure there is not to much soder on the middle pin and make sure there not touching the other pins

[blackburn]

im guessing that one of the points are bridged on the trigger and/or not making a good connection, try just heating up the solder on all 3 points this might help because some of the solder could not be making a good connection with the traces and if they are bridged, it can reflow the solder back to the points, just check and recheck.

[m@DDm!k3]

thx alot guys ill try this out as soon as i get home from sKoo [lol hacked comp to gimme access stupid skool filters]

[blackburn]

thx alot guys ill try this out as soon as i get home from sKoo [lol hacked comp to gimme access stupid skool filters]

lol proxies.....

i actually made one for use at my school 

it has a username and password on it so people cant leech my proxy without asking, and usually proxies get blocked quick at my school, but this one has been up for 2 years now lol 

[m@DDm!k3]

lol Nice!