Author Topic: Need help with switch!  (Read 1533 times)

Offline Knightsofwar210

  • Ω Allumnist Ω
  • *
  • Posts: 136
  • Post quality +0/-0
  • Gender: Male
    • Knightsofwar210site
Need help with switch!
« on: September 27, 2008, 11:14:23 AM »
Okay like some of you know, I am going to mod the psp camera internally into my psp so I found a switch from my old webcam and I cut it out but I don't know what side is the positive side and which side is the negative side, Here are some pictures.

Here are the 3 pictures - They are high resolution - http://www.mediafire.com/?sharekey=2770a1b3c31ab441ab1eab3e9fa335ca2bb81849a770fb9c

I am trying to use this switch for the led light mod

Offline Jumbo

  • Dr. Mod
  • BST BAN
  • Around the block
  • *
  • Posts: 2399
  • Post quality +0/-3
Re: Need help with switch!
« Reply #1 on: September 27, 2008, 11:27:40 AM »
There is no difference  :huh:

Offline RoBot1ks

  • Club AM VIP
  • Acid Modder
  • *
  • Posts: 671
  • Post quality +0/-0
  • Gender: Male
  • 1 r n00ber
    • Myspace
Re: Need help with switch!
« Reply #2 on: September 27, 2008, 12:18:06 PM »
I am going to mod the psp camera internally

trying to use this switch for the led light mod
lol which one.
but yea there is no difference  :tup:

Offline Knightsofwar210

  • Ω Allumnist Ω
  • *
  • Posts: 136
  • Post quality +0/-0
  • Gender: Male
    • Knightsofwar210site
Re: Need help with switch!
« Reply #3 on: September 27, 2008, 03:46:01 PM »
I meant that can I use that witch for the leds or the camera but no at the same time, which is the positive and which is the negate place that I need to solder because I have no clue where to solder.

Offline Knightsofwar210

  • Ω Allumnist Ω
  • *
  • Posts: 136
  • Post quality +0/-0
  • Gender: Male
    • Knightsofwar210site
Re: Need help with switch!
« Reply #4 on: September 30, 2008, 04:31:05 PM »
Where do I solder on that switch?

Offline folklord36

  • Research & Development
  • Acid Modder
  • *
  • Posts: 810
  • Post quality +0/-0
  • Gender: Male
Re: Need help with switch!
« Reply #5 on: September 30, 2008, 05:35:08 PM »
don't double post, negitive and positive dose not matter on a switch but thats a 3 pole switch the middle is the anode and the cathode switches from the left or right pin as you slide the switch so the middle and either side and it will be an on/off switch

 

SMF spam blocked by CleanTalk
SimplePortal 2.3.5 © 2008-2012, SimplePortal