Author Topic: led power swap problem- solved  (Read 1038 times)

Offline atomicareprise

  • Registered BST
  • Acid Modder
  • *
  • Posts: 595
  • Post quality +2/-0
  • Gender: Male
  • FILIPINO SINCE BIRTH
led power swap problem- solved
« on: March 04, 2009, 09:54:47 PM »
so i did my led swap in pobo...

i did this mod to mine and doing this mod to my brother..

what my problem is my light power leds wont light up but my

charge led lights up...what could be wrong???
« Last Edit: March 05, 2009, 05:08:50 AM by atomicareprise »
viperfan91 (phat), thaq93 (psp phat parts)
pinoyballa  (2 phats ), tri-edge (slim)
Awilliams357- to be shipped

Offline rceckspurt13

  • Acid Modder
  • *
  • Posts: 637
  • Post quality +2/-0
  • Gender: Male
Re: led power swap problem
« Reply #1 on: March 04, 2009, 10:11:56 PM »
1. The power led is not properly connected ex: beckeards polarity or ground or positive is not connected.
2. You may have burned the led if you heated it too much while trying to solder it. I did this a few times.

Try switching the polarity and if it still doesn't work then switch it with another.
Any Questions? Please Contact Me: rceckspurt13@gmail.com

Offline atomicareprise

  • Registered BST
  • Acid Modder
  • *
  • Posts: 595
  • Post quality +2/-0
  • Gender: Male
  • FILIPINO SINCE BIRTH
Re: led power swap problem
« Reply #2 on: March 04, 2009, 10:51:32 PM »
i made it turn on both power/charge led but some how

it just the charge led remains to light up...

i'll just do it again :tup:

thanks rceck..
viperfan91 (phat), thaq93 (psp phat parts)
pinoyballa  (2 phats ), tri-edge (slim)
Awilliams357- to be shipped

 

SMF spam blocked by CleanTalk
SimplePortal 2.3.5 © 2008-2012, SimplePortal