Author Topic: Is my MoBo done?  (Read 1147 times)

Offline Minionki7

  • Chief squatting Hard
  • *
  • Posts: 11
  • Post quality +0/-0
  • Gender: Male
Is my MoBo done?
« on: December 05, 2008, 05:15:55 PM »
i was doing a case replacement and one of the speaker magnents got stuck to it. the green light comes on no picture. tried useing my pandora and mms and still nothing.

Offline loganbyers07

  • Acid Modder
  • *
  • Posts: 585
  • Post quality +0/-0
  • Gender: Male
Re: Is my MoBo done?
« Reply #1 on: December 05, 2008, 05:40:34 PM »
well no it is not neccesarily fried... there is some way to bridge a fuse that will apparently fix this... try running a google search.

Thanks for the sig dhuvrock2000
     
The best way to get cool gaming stuff for free!

Offline Minionki7

  • Chief squatting Hard
  • *
  • Posts: 11
  • Post quality +0/-0
  • Gender: Male
Re: Is my MoBo done?
« Reply #2 on: December 05, 2008, 07:14:48 PM »
k thanks

EDIT: What fuse are you talking about the backlight one?
EDIT2:also when the pandora is put in with the maging memory stick the memory stick light does not flash. I know they work cause i put them in a different psp and went how it should.
« Last Edit: December 05, 2008, 08:03:13 PM by Minionki7 »

Offline PhenomenalDesigns

  • Granny Spanker
  • *
  • Posts: 476
  • Post quality +0/-0
  • Gender: Male
Re: Is my MoBo done?
« Reply #3 on: December 06, 2008, 05:23:39 AM »
k thanks

EDIT: What fuse are you talking about the backlight one?
EDIT2:also when the pandora is put in with the maging memory stick the memory stick light does not flash. I know they work cause i put them in a different psp and went how it should.

1.

I think he means the backlight fuse, its most likely to be one

Here it is:


2. If that is the case, it could even be the powerfuse, but then again, the green power LED, Try brigding the backlight fuse then try agian, if it doesnt work (the MMS light) then make sure the WiFi board is in place properly, no dust on the contacts and make sure its the right Wifi Board, just incase you got it mixed up


Hoi! Pinoy ako!

Offline Minionki7

  • Chief squatting Hard
  • *
  • Posts: 11
  • Post quality +0/-0
  • Gender: Male
Re: Is my MoBo done?
« Reply #4 on: December 06, 2008, 11:09:47 AM »
make sure its the right Wifi Board, just incase you got it mixed up

Does the wifi board matter? the MoBo im having problems with is a TA-75 and my other is a TA-82 and i think i did switch the wifi board.

Offline rceckspurt13

  • Acid Modder
  • *
  • Posts: 637
  • Post quality +2/-0
  • Gender: Male
Re: Is my MoBo done?
« Reply #5 on: December 06, 2008, 03:17:48 PM »
Yes the wifi board does matter. It has to match the motherboar for it to function properly. I'd suggest switching them back.
Any Questions? Please Contact Me: rceckspurt13@gmail.com

Offline Minionki7

  • Chief squatting Hard
  • *
  • Posts: 11
  • Post quality +0/-0
  • Gender: Male
Re: Is my MoBo done?
« Reply #6 on: December 07, 2008, 12:25:25 AM »
Well there's good news and bad news

Good news: got it working, didn't have to do anything but change the wifi boards back.

Bad news: lost my R trigger :fear: I'll cunduct a more thurough search tomorrow and if i don't find it ill order some off ebay.

Thanks for the help.

 

SMF spam blocked by CleanTalk
SimplePortal 2.3.5 © 2008-2012, SimplePortal