Author Topic: GH DS solder points  (Read 1790 times)

Offline FreeK

  • a-LeeK
  • Acidmods Alumni
  • E = MC² Mad Scientist
  • *
  • Posts: 1980
  • Post quality +3/-0
  • Gender: Male
  • Team CYBER for life
GH DS solder points
« on: December 20, 2008, 02:19:00 PM »


does anyone know if the points on there (at the bottom) would work for led? so i can light the buttons on my guitar hero DS

Offline Timmy

  • Millennium Poster
  • *
  • Posts: 1155
  • Post quality +1/-0
  • Gender: Male
  • Acidmods User
Re: GH DS solder points
« Reply #1 on: December 20, 2008, 06:19:15 PM »
use a multimeter in voltage test mode put the negative on a ground, i think those big gold plates are im not sure and put the positive on each one until you get a reading, anywhere between 1.5-5 volts will do

the easier test but far less rudimentary test that i sometimes use is to just solder the negative of your led to a ground, then insert the guitar hero attachment into to the ds, power it on and touch the positive of the led to each of those points.

but that doesn't look a whole lot like its the place to be soldering too..... if you know which pins in the phat gba slot give out a voltage (it'd be the same as the ds lite id imagine) just find a trace that comes off that pin and solder away, but if you sure if thats the place then try the above.
« Last Edit: December 20, 2008, 06:21:22 PM by TimmyDX »

 

SMF spam blocked by CleanTalk
SimplePortal 2.3.5 © 2008-2012, SimplePortal