Author Topic: Packaging fail. (Read 6298 times)

H-Sauce · « **on:** January 02, 2009, 04:20:15 PM »

Ok, I bought a pair of wire strippers today. Hmm...

JumpFalcon · « **Reply #1 on:** January 02, 2009, 04:23:41 PM »

What can I say there are some silly people in the world.

Reaper · « **Reply #2 on:** January 02, 2009, 06:52:27 PM »

i don't get it...

bustinthejustin · « **Reply #3 on:** January 02, 2009, 06:54:31 PM »

Reaper, do you wear safety goggles while stripping wires?

Alien_X · « **Reply #4 on:** January 03, 2009, 12:57:03 PM »

I do

If you have ever had solid core 15 AWG wire get in your eye, you would know.

But I am never solely stripping wires, so I am already wearing them.

PspKicks316 · « **Reply #5 on:** January 03, 2009, 01:11:51 PM »

Quote from: Alien_X on January 03, 2009, 12:57:03 PM

I do

If you have ever had solid core 15 AWG wire get in your eye, you would know.

But I am never solely stripping wires, so I am already wearing them.

Yeah good point. And getting hot plastic in your eye sucks too, like feedback from dremeling plastic. Oh god, that hurts.

bustinthejustin · « **Reply #6 on:** January 03, 2009, 01:19:21 PM »

I should buy some safety goggles but Idk where... *shrug* I have eyeglasses so goggles piss me off.

JumpFalcon · « **Reply #7 on:** January 03, 2009, 01:22:55 PM »

I think they make magnifying safety goggles... not sure where though. Sorry.

Skullmaster · « **Reply #8 on:** January 03, 2009, 01:27:29 PM »

I only use safety glasses when using power equipment like saws and grinders. I will sometimes if I'm hitting metal or somthing dangerous that could break. I allways wear them when I weld cause that is like the worst place to not wear safety glasses. So basically if you think you need em wear em but if something happens when your not wearing em then its hour fault...

bustinthejustin · « **Reply #9 on:** January 03, 2009, 01:28:19 PM »

O_O Magnifying safety goggles? I wonder if I can get prescription goggles. I think they make those for sports so maybe I could use them as safety goggles too.

H-Sauce · « **Reply #10 on:** January 03, 2009, 01:29:22 PM »

Meh, just do it all with a set of helping hands. You can see it better plus nothuing can fly into your face.

Alien_X · « **Reply #11 on:** January 03, 2009, 01:37:15 PM »

Quote from: frostBYTE! on January 03, 2009, 01:29:22 PM

Meh, just do it all with a set of helping hands. You can see it better plus nothuing can fly into your face.

How?

And skullmaster, you can weld? awesome!

H-Sauce · « **Reply #12 on:** January 03, 2009, 01:40:20 PM »

Big magnifier thingy.

Jumbo · « **Reply #13 on:** January 03, 2009, 01:41:35 PM »

Quote from: Alien_X on January 03, 2009, 01:37:15 PM

How?

And skullmaster, you can weld? awesome!

Skull is a modder of all, saying that he works with cars.

And yea i recommend wearing goggles while working with any power tool. If you get that crap in your eye you wont be happy.

H-Sauce · « **Reply #14 on:** January 03, 2009, 01:43:29 PM »

A pair of wire strippers is hardly a power tool.

PhenomenalDesigns · « **Reply #15 on:** January 03, 2009, 03:44:53 PM »

Wire strippers hurt eyes?

Ha

Ever had those thin breakable dremel disks explode/smash and end up in your eye at 25000 RPM?

Ever had solder go in your eye?

Ever had a dremel go 1cm into your arm from an etching bit?

It hurts, trust me I know

robin1989 · « **Reply #16 on:** January 03, 2009, 04:23:04 PM »

Quote from: bustinthejustin on January 03, 2009, 01:19:21 PM

I should buy some safety goggles but Idk where... *shrug* I have eyeglasses so goggles piss me off.

you can get them sometimes free when you buy lots of fireworks - i must have about 7 at least from over the years all beried in the garage someware

bustinthejustin · « **Reply #17 on:** January 03, 2009, 04:26:26 PM »

Lol unfortunately, local stores don't sell fireworks to minors

JumpFalcon · « **Reply #18 on:** January 03, 2009, 04:56:12 PM »

I stabbed myself real deep with a scalpel whilst doing a dissection, I also sanded down to the bone on one of my fingers with a disc sander (one of the powerful bench-mount ones).

Logic would suggest that I should wear gloves.

bustinthejustin · « **Reply #19 on:** January 03, 2009, 05:11:02 PM »

Something tells me you shouldn't be trusted with power tools O_O

JumpFalcon · « **Reply #20 on:** January 03, 2009, 05:13:15 PM »

Both of those were before I was even a teenager. I'm better now.

PspKicks316 · « **Reply #21 on:** January 03, 2009, 05:26:49 PM »

Quote from: JumpFalcon on January 03, 2009, 05:13:15 PM

Both of those were before I was even a teenager. I'm better now.

Gee, I'm 15 and use power tools all the time. I've never even screwed up that much. Ouch.

ProperBritish · « **Reply #22 on:** January 03, 2009, 05:46:23 PM »

power tools rawk

though the cookers at McDonald's are probably more likely to hurt me over them xD

300 degree metal plates anyone? vats of 200 degree fat? heck i got pickle vinegar in my eye and that hurt :P

worst thing ive done with tools is grab wrong end of the iron.

also phen how on earth did you get solde in your eye??

last time i checked no mod involved lifting an iron above your head D:

JumpFalcon · « **Reply #23 on:** January 03, 2009, 05:53:25 PM »

Vinegar in the eye would hurt!

At a party a got Tabasco in my eyes: that really hurt. On a trip to the Tate Museum I went to the toilet and came back to see someone had prepared a line of sugar for me. Needless to say, caught up in the moment, I snorted it (bloody long it was too). It soon became apparent they had hidden pepper underneath it. I think the guard saw me rolling in agony. (*^^*)

I've burned myself on soldering irons and PICs a few times too.

Quote from: PspKicks316 on January 03, 2009, 05:26:49 PM

Gee, I'm 15 and use power tools all the time. I've never even screwed up that much. Ouch.

Well, when I was 10 I was using the disc sander when my hand slipped off the wood and sanded it real quick. Only a few seconds and bone was visible.

The heart dissection was weird! I was poking my finger down the superior vena cava I think when it ran straight into the scalpel that was stuck in their. It was so sharp it didn't hurt though.

By age 13 I was welding, using cutting torches, using circular saws etc. with master skillz

bustinthejustin · « **Reply #24 on:** January 03, 2009, 05:58:42 PM »

I've flicked solder onto my face, so I'd assume if you had good aim you could get it in your eye. Come to think of it, I SHOULD get some goggles. I have some badminton goggles, I suppose those won't be too bad.

PspKicks316 · « **Reply #25 on:** January 03, 2009, 06:08:00 PM »

Erm, okay.

H-Sauce · « **Reply #26 on:** January 04, 2009, 01:08:14 AM »

Lol, the worast I've had is when the other day I was attemptiing to solder an 0603 LED and one of my fingers hit the screw on my soldering iron. All I got was a bloody painful finger and a blister.

Alien_X · « **Reply #27 on:** January 04, 2009, 01:43:26 AM »

To be honest, any injury involving the word dremel isn't an injury (Apart from hot plastic).

I've never really hurt myself on power tools, and I use / have a lot.

I have a bench mount disc sander : ) They are evil if you are sanding something small and thin..

Luke · « **Reply #28 on:** January 04, 2009, 03:37:17 AM »

The worsting thing to have in your eye is actually An Iron with hot flux on it. My god that hurts

PhenomenalDesigns · « **Reply #29 on:** January 04, 2009, 07:29:12 AM »

Oh yeah something else

I got a scar under my nose from the heat of leds

I use the part under my nose and above my mouth for tellings temps, like an leds, because my hands are full

one time the LED was REALLY hot, like a red one at 3 volts, gets hot as hell, melting hot glue

i touched it now i have a small burn scar there

News:

Author Topic: Packaging fail. (Read 6298 times)