Author Topic: where are the ds lite LED tutorials with pics? LED questions  (Read 1916 times)

Offline tutata

  • Chief squatting Hard
  • *
  • Posts: 10
  • Post quality +0/-0
  • Gender: Male
where are the ds lite LED tutorials with pics? LED questions
« on: January 21, 2009, 06:17:15 PM »
Hey guys, i was looking online for ds lite LED mods with pictures so far ive only found this one http://www.n-mod.com/mods/DS/
http://www.n-mod.com/wiki/index.php5?title=Adding_LED%27s_to_the_DS_Lite
https://www.acidmods.com/forum/index.php?topic=16264.0
Any tuts around?
Are there any video tutorials on how to do this?
What are some precautions i should take?

FreeK-plz link your urls
« Last Edit: January 21, 2009, 09:40:20 PM by FreeK »

Offline Timmy

  • Millennium Poster
  • *
  • Posts: 1155
  • Post quality +1/-0
  • Gender: Male
  • Acidmods User
Re: where are the ds lite LED tutorials with pics? LED questions
« Reply #1 on: January 22, 2009, 03:59:34 AM »
precautions are the same as with any mod,  just be careful ;)

heres a diagram i did for putting led's in the filler slot, if you want to put lots of led's in the shell too then just go inside the ds and match up the pins on the motherboard, its not hard, just think of each pin in the filler cart as a wire runnig straight through to the pins on the motherboard on the back side of the slot -2 connector.

a clear case is always useful but it looks nice and eary on a white shell


Offline tutata

  • Chief squatting Hard
  • *
  • Posts: 10
  • Post quality +0/-0
  • Gender: Male
Re: where are the ds lite LED tutorials with pics? LED questions
« Reply #2 on: January 23, 2009, 07:49:53 PM »
precautions are the same as with any mod,  just be careful ;)

heres a diagram i did for putting led's in the filler slot, if you want to put lots of led's in the shell too then just go inside the ds and match up the pins on the motherboard, its not hard, just think of each pin in the filler cart as a wire runnig straight through to the pins on the motherboard on the back side of the slot -2 connector.

a clear case is always useful but it looks nice and eary on a white shell



im still not understanding how to add the leds to the system itself, i found this picture
http://www.n-mod.com/wiki/index.php5?title=Image:DslitePled.jpg
It is confusing though,and the LEDs have a shorter and longer metal piece showing one of them being positive and the other being negative right?

 

SMF spam blocked by CleanTalk
SimplePortal 2.3.5 © 2008-2012, SimplePortal