Author Topic: where to wire..  (Read 918 times)

Offline atomicareprise

  • Registered BST
  • Acid Modder
  • *
  • Posts: 595
  • Post quality +2/-0
  • Gender: Male
  • FILIPINO SINCE BIRTH
where to wire..
« on: January 30, 2009, 03:18:41 AM »
i'd like to know where to solder the d-pad points to

analog stick..and where to solder the gound points..

i know now the solder points to do the dual nub

but i don't know this one..help guys.. :beg:

viperfan91 (phat), thaq93 (psp phat parts)
pinoyballa  (2 phats ), tri-edge (slim)
Awilliams357- to be shipped

Offline treemty

  • l,,l METAL l,,l
  • Millennium Poster
  • *
  • Posts: 1231
  • Post quality +1/-0
  • Gender: Male
  • Will mod for food
    • the1337group.com
Re: where to wire..
« Reply #1 on: January 30, 2009, 04:08:02 AM »
i'd like to know where to solder the d-pad points to

analog stick..and where to solder the gound points..

i know now the solder points to do the dual nub

but i don't know this one..help guys.. :beg:
you cannot to a direct wiring from the analog nub to the face buttons.

because the X,O,[] and Y  are all digital and the analog nub is(as its name says) analog,
 what the razor X does is it basically makes an analog-digital converter

so you can only do this if you have a razor X or an A2D board(homemade razor X)(A2D stands for analog to digital)
                                                                     
« Last Edit: January 30, 2009, 04:10:12 AM by treemty »

Offline atomicareprise

  • Registered BST
  • Acid Modder
  • *
  • Posts: 595
  • Post quality +2/-0
  • Gender: Male
  • FILIPINO SINCE BIRTH
Re: where to wire..
« Reply #2 on: January 30, 2009, 04:42:23 AM »
what about using the controller of ps2??
viperfan91 (phat), thaq93 (psp phat parts)
pinoyballa  (2 phats ), tri-edge (slim)
Awilliams357- to be shipped

 

SMF spam blocked by CleanTalk
SimplePortal 2.3.5 © 2008-2012, SimplePortal