Prevent DS Lite Stylus From Falling Out by Gamer4life & 4dP

[Jumbo]

Prevent DS Lite Stylus From Falling Out

Introduction
Hi everyone this is my very first tut i wrote about this same thing in the ds board and someone suggested i write a tut so here it is i hope you like it and find it usefull.


Parts Needed

• Tape

• DSL stylus

Tools Needed

• N/A

Difficulty rating: 1/5


Average Time to Complete:  1-5 mins


Notes:
i dont if this works on ds phat as i do not own one
the kind of tape that goes on a tape dispenser the one inch width tape i think

 
Step By Step Tutorial

1. get a piece of tape maybe an inch or two long
2. Hold the stylus and the piece of tape


3. take tape and wrap it around the part that has that bump that usually holds the stylus in. take tape and wrap no more than once or twice around as it might not fit in



4. test it out put stylus into the stylus hole and turn dsl on side and shake the dsl a little the stylus shouldn't come out



FAQ/ Troubleshooting

• Stylus can not fit inside the ds

                  Remove the tape and use less