pobo's led swap

[atomicareprise]

so again before i do the led swap mod i want to azk you guys again for your

expertise on this one

is this correct??i want to know which side is the + and - is...


and second, is this right way to bridge this??


thanks guys

[crazyl69]

    The small traces that goes from the 2 resistors to the leds are known to be the (-) side or contact points. The larger area almost underneath the leds is known to be the (+) side or contact point. From the (-) side of the leds both leds will be solder seperate following the small traces and from the (+) side of the leds, both will be solder to the larger area together. Its not really bridging but linking both (+) sides together. Good Luck...

[atomicareprise]

that means the pics that i did is not correct

i'll just change and reverse it...thanks man