Author Topic: hot glue + clear things = tacky?  (Read 1665 times)

Offline bustinthejustin

  • Registered BST
  • E = MC² Mad Scientist
  • *
  • Posts: 2326
  • Post quality +1/-0
  • Gender: Male
hot glue + clear things = tacky?
« on: February 13, 2009, 01:30:32 PM »
Is it just me, or does hot glue look really weird on clear things? like if you don't apply the hot glue really really accurately and with the exact same amount on every led you're putting into your console, doesn't it look asymmetrical, and weird? Anybody else have this problem, or know a solution? here's an example - a pic of my clear gameboy that I used leds and hot glue in...






Sig by Kenshinffx - Thanks!

Offline PspKicks316

  • Acidmods Alumni
  • Mad Bomber
  • *
  • Posts: 5709
  • Post quality +5/-4
  • Gender: Male
Re: hot glue + clear things = tacky?
« Reply #1 on: February 13, 2009, 01:48:30 PM »
Yes. That's why most people don't use hot glue on clear things. It's virtually impossible to make it not look messed up from it.

Offline bustinthejustin

  • Registered BST
  • E = MC² Mad Scientist
  • *
  • Posts: 2326
  • Post quality +1/-0
  • Gender: Male
Re: hot glue + clear things = tacky?
« Reply #2 on: February 13, 2009, 01:49:49 PM »
Any alternatives to hold things down on a clear case?

Sig by Kenshinffx - Thanks!

Offline Skullmaster

  • God Of Cars
  • Acidmods Alumni
  • E = MC² Mad Scientist
  • *
  • Posts: 1520
  • Post quality +1/-0
  • Gender: Male
  • Admin Force, Co-Owner Wanna-be
    • Acidmods
Re: hot glue + clear things = tacky?
« Reply #3 on: February 13, 2009, 01:53:39 PM »
I would have glued the leds to the circuit board.

Offline DarkShot

  • I approve your mom
  • Acid Modder
  • *
  • Posts: 781
  • Post quality +0/-0
  • Gender: Male
  • ÜBERRAPESKILLETS
Re: hot glue + clear things = tacky?
« Reply #4 on: February 13, 2009, 09:24:02 PM »
Model car glue?

Just don't use alot.

Offline budgray19

  • Acidmods Alumni
  • E = MC² Mad Scientist
  • *
  • Posts: 2134
  • Post quality +1/-0
  • Gender: Male
  • OH NO MY CHITTY CHICKEN, NOO NOT MY CHITTY BEEF
Re: hot glue + clear things = tacky?
« Reply #5 on: February 14, 2009, 12:54:44 PM »
yea i use crazy glue with the brush


Offline PhenomenalDesigns

  • Granny Spanker
  • *
  • Posts: 476
  • Post quality +0/-0
  • Gender: Male
Re: hot glue + clear things = tacky?
« Reply #6 on: February 14, 2009, 03:26:12 PM »
Is it just me, or does hot glue look really weird on clear things? like if you don't apply the hot glue really really accurately and with the exact same amount on every led you're putting into your console, doesn't it look asymmetrical, and weird? Anybody else have this problem, or know a solution? here's an example - a pic of my clear gameboy that I used leds and hot glue in...






The best way to do it with hotglue

Get a rotary tool, drill a tiny dent for the led, put the slightest amount of hotglue

Place led, then it should spread across the whole clear case and there wouldnt be any visible hotglue


Hoi! Pinoy ako!

Offline Timmy

  • Millennium Poster
  • *
  • Posts: 1155
  • Post quality +1/-0
  • Gender: Male
  • Acidmods User
Re: hot glue + clear things = tacky?
« Reply #7 on: February 14, 2009, 06:27:19 PM »
i use a super glue that whittles down to a small layer from the blob you put on there

also make your led locations a bit smarter

it wont look so wierd if you put the led's right in the corners and against the edges and such

But yeah the ideal glues are the "gooey" super glues rather then runny ones and epoxy's such as araldite

hot glue is good for a quick hold but its not incredibly durable and there are certain surfaces it will damage and some it wont stick to at all.

Offline hevitikku

  • ½ Pint
  • *
  • Posts: 29
  • Post quality +0/-0
  • Gender: Male
Re: hot glue + clear things = tacky?
« Reply #8 on: February 18, 2009, 07:43:57 AM »
epoxy works well... you need only small amount of it and it holds VERY well... but it sucks if you fail with it coz theres no way gettin it off nicely...

Offline bustinthejustin

  • Registered BST
  • E = MC² Mad Scientist
  • *
  • Posts: 2326
  • Post quality +1/-0
  • Gender: Male
Re: hot glue + clear things = tacky?
« Reply #9 on: February 18, 2009, 01:21:08 PM »
lol thx guys... Any recommended super glue or will any work? Also Timmy, about location, I wanted to put it at edges but both sides weren't symettrical and so I couldn't make it look good.

Sig by Kenshinffx - Thanks!

Offline kink192

  • Acid Modder
  • *
  • Posts: 916
  • Post quality +1/-0
  • Gender: Male
Re: hot glue + clear things = tacky?
« Reply #10 on: February 20, 2009, 03:17:12 PM »
isnt superglue condictive?
It's been a long time

Offline Jumbo

  • Dr. Mod
  • BST BAN
  • Around the block
  • *
  • Posts: 2399
  • Post quality +0/-3
Re: hot glue + clear things = tacky?
« Reply #11 on: February 20, 2009, 03:44:21 PM »
isnt superglue condictive?
Some are. Also i recommend Nail Glue, its used in like salons and nail parlors its super strong, spreads on the wires, and pretty invisible.

 

SMF spam blocked by CleanTalk
SimplePortal 2.3.5 © 2008-2012, SimplePortal