Author Topic: You decide (Read 9615 times)

ApheX · « **on:** February 23, 2009, 01:52:53 AM »

Hey all, i haven't modded a psp in a little while, but i've got a phat sitting in my desk begging for some attention.
I have an idea on what i'm going to add, however i'm not sure about the colour scheme. So i'd like your ideas, what does the acidmod crew like in a psp. the best ideas will be made for this console

atomicareprise · « **Reply #1 on:** February 23, 2009, 03:41:09 AM »

well i have not seen a tri - color scheme...

RASTA COLORS looks tight

pspupgrade · « **Reply #2 on:** February 23, 2009, 04:03:10 AM »

I agree with the tricolor

What about FaceplateBlueandRed Leds.

treemty · « **Reply #3 on:** February 23, 2009, 04:05:26 AM »

ewwwwwwwwwwwwwwwwwwwwwwwww

I think black and UV
photofast
dual nub
jewel-Duh
something else

ApheX · « **Reply #4 on:** February 23, 2009, 04:19:36 AM »

Quote from: atomicareprise on February 23, 2009, 03:41:09 AM

well i have not seen a tri - color scheme...

RASTA COLORS looks tight

Quote from: pspupgrade on February 23, 2009, 04:03:10 AM

I agree with the tricolor
What about FaceplateBlueandRed Leds.

I've tried making a tri coloured psp before, but i didn't like how it looked, Far to 'confusing' a look to pull off correctly.

Quote from: treemty on February 23, 2009, 04:05:26 AM

ewwwwwwwwwwwwwwwwwwwwwwwww

I think black and UV
photofast
dual nub
jewel-Duh
something else

I made something similer for grenade girl (mate of mine here). I do love black and UV, they fit togethr very well as a colour scheme

robin1989 · « **Reply #5 on:** February 23, 2009, 05:19:25 AM »

with a tri colour you could have it so that each colour scheme is individually switched so that you could alter the colour for your mood.

also vu meter
custom paint job
button lighting
~~joy360~~
lazerz
solar charging

rceckspurt13 · « **Reply #6 on:** February 23, 2009, 05:47:16 AM »

I'm not sure why you'd want lasers on your psp. Also solar charging, although it may work, isn't really practical. It would take forever to charge, and besides, who wants to leave their psp out in direct sunlight?

robin1989 · « **Reply #7 on:** February 23, 2009, 06:57:37 AM »

laserz - to blind the competition when playing adhoc

solar - to tricle charge whilst your playing in the park it gets you those few extra minutes of play time which is all that counts

ApheX · « **Reply #8 on:** February 23, 2009, 10:54:49 AM »

Button lighting is something i want to add to it and I was looking into the whole solar charging conscept and it is possibal to make.
I might try a fiber optic mod on the back of the psp. i've always wanted to try that. But i'm still not sure what colours to go with.

rgarjr · « **Reply #9 on:** February 23, 2009, 11:00:32 AM »

Has anyone ever done a buton lighting where when you press the button the LED lights up? This of course would require a lot of wiring tapping into of course.

TheZap · « **Reply #10 on:** February 23, 2009, 02:17:06 PM »

Quote from: rgarjr on February 23, 2009, 11:00:32 AM

Has anyone ever done a buton lighting where when you press the button the LED lights up? This of course would require a lot of wiring tapping into of course.

Yes,it has been made many times, ive seen it on Xboxs, Guitar Hero Guitars, and On PSPs, search it up on google :P
========================================================
Now for my idea, Hmmm, I was looking threw PacSun The Other Day and saw this bikini top with a cool desighn, on side was like a black and white vectorish and the other had a cool redish desighn, I say you should do that, try making a vectorish desighn and on one side it either has less vector or no vector, or no vector at all in either side, whatever you want, then on the side with less or no vector put a cool redish desigh, use this tattoo technique that I made,
https://www.acidmods.com/forum/index.php?topic=28465.msg206995#new
That would look pretty sick,
As for the buttons, get like red buttons to go with the design, maybe get some LEDs, but red to match.
As for the ring, maybe you should get a jewel, or maybe get a red ring, or maybe a clear ring, but with red LEDs :P
Main Colors, Black, White, and Red, Or White and red, Or Black and Red, whatever you want dude, your psp o.O

ApheX · « **Reply #11 on:** February 24, 2009, 04:56:21 AM »

The temp tattoo idea is pretty good. i was thinking of adding a tribal design on the back. this would be easier than using a stencal.
Ok, I think i have an idea what i'm going to do;

-Silver case with tribal design on the front and back
-Black trim, umd ring and maybe buttons
-White leds
-Removebal razor-x nub (usb)
-Jewel
-Speaker mod

I would love to add a knight rider led mod to the console however i have no idea how to make that. Unless anyone here has a cule?

rceckspurt13 · « **Reply #12 on:** February 24, 2009, 05:49:27 AM »

Well the knight rider thing is called a tracer. You could make one, but you needto be able to program a pic to control the on/off of the LEDs to get that back and forth looking effect. You could probably find one on the Internet somewhere.

Type led tracer into YouTube. Some peoplebuild them on breadboards and you can see the required wiring etc.

pranav41 · « **Reply #13 on:** February 24, 2009, 10:56:18 AM »

i would suggest you to get ur case etched with designs or tribal designs or...... !!, i know it sounds weird , BTW it is very well possible , , that would be the best , and of course jewel with led's .....

TheZap · « **Reply #14 on:** February 25, 2009, 12:05:02 PM »

Quote from: rceckspurt13 on February 24, 2009, 05:49:27 AM

Well the knight rider thing is called a tracer. You could make one, but you needto be able to program a pic to control the on/off of the LEDs to get that back and forth looking effect. You could probably find one on the Internet somewhere.

Type led tracer into YouTube. Some peoplebuild them on breadboards and you can see the required wiring etc.

Hmm, well youtube gave me a load of

Youknow anything?

rceckspurt13 · « **Reply #15 on:** February 25, 2009, 04:00:37 PM »

Well I don't know how to build a tracer because it uses a pic which is somhing I have no experience with.

Blazinkaos · « **Reply #16 on:** February 26, 2009, 08:56:37 AM »

The tri color sounds really cool but if your looking for soemthign to deck it out good go with
-tri color(purple, blue, green)
-jewel
-push activate buttons
-sound reactive leds

i think those would do well together.

TheZap · « **Reply #17 on:** February 26, 2009, 01:52:14 PM »

Quote from: rceckspurt13 on February 25, 2009, 04:00:37 PM

Well I don't know how to build a tracer because it uses a pic which is somhing I have no experience with.

>.< oooo, I was just going to ask if you knew how, I wonder if the guys back at radioshack know anything :P

Quote from: Blazinkaos on February 26, 2009, 08:56:37 AM

The tri color sounds really cool but if your looking for soemthign to deck it out good go with
-tri color(purple, blue, green)

it really depends how good you are at blending, those can all come out to come out sick, but if you suck at blending things in, screw it,
Ex how to blend it in,
Blue LEDs,
Purple FacePlate
Yellow Ring
Or something like that,

Ex of what not to do...
Purple Face Plate
Yellow UMD door,
Blue Ring,
Or anything like that I guess...
In my opinion, it looks hideos when some1 puts a different colored UMD door

rceckspurt13 · « **Reply #18 on:** February 26, 2009, 03:39:38 PM »

I kinda agree about the umd door thing. Or a different color faceplate from the back. I think just about any color LEDs should look good.

bustinthejustin · « **Reply #19 on:** February 26, 2009, 03:50:18 PM »

Quote from: TheZap on February 26, 2009, 01:52:14 PM

>.< oooo, I was just going to ask if you knew how, I wonder if the guys back at radioshack know anything :Pit really depends how good you are at blending, those can all come out to come out sick, but if you suck at blending things in, screw it,
Ex how to blend it in,
Blue LEDs,
Purple FacePlate
Yellow Ring
Or something like that,

Ex of what not to do...
Purple Face Plate
Yellow UMD door,
Blue Ring,
Or anything like that I guess...
In my opinion, it looks hideos when some1 puts a different colored UMD door

There's not much difference there. You're using the same colours, just in different places. It'd still look pretty messed up either way.

Blazinkaos · « **Reply #20 on:** February 26, 2009, 04:01:24 PM »

hmm may be to case ing a different color and a trim that would look good and have a leds as the third color. Just need a good combination.

TheZap · « **Reply #21 on:** February 26, 2009, 04:51:14 PM »

Quote from: bustinthejustin on February 26, 2009, 03:50:18 PM

There's not much difference there. You're using the same colours, just in different places. It'd still look pretty messed up either way.

True, but wouldnt you rather have it evened out and blended in together,

bustinthejustin · « **Reply #22 on:** February 26, 2009, 07:16:14 PM »

Yeah well it'd look the best probably if you can't see all the different colours at the same time. Like only have colours that match visible at the same time. Like purple and yellow would look pretty cool so like purple faceplate and yellow buttons (dark yellow.. I don't think they sell them but they'd be awesome.) and then on the back like a purple backplate but a blue ring of light or something. Idk I think sticking with 2 colours that match really well is the best way to go.

rceckspurt13 · « **Reply #23 on:** February 26, 2009, 07:20:12 PM »

Quote from: bustinthejustin on February 26, 2009, 07:16:14 PM

Idk I think sticking with 2 colours that match really well is the best way to go.

Agreed

Blazinkaos · « **Reply #24 on:** February 27, 2009, 08:40:41 AM »

Quote from: bustinthejustin on February 26, 2009, 07:16:14 PM

Yeah well it'd look the best probably if you can't see all the different colours at the same time. Like only have colours that match visible at the same time. Like purple and yellow would look pretty cool so like purple faceplate and yellow buttons (dark yellow.. I don't think they sell them but they'd be awesome.) and then on the back like a purple backplate but a blue ring of light or something. Idk I think sticking with 2 colours that match really well is the best way to go.

mm may that sounds cuz if you imagine it wouldnt look bad.

krazyone2006 · « **Reply #25 on:** February 28, 2009, 09:40:51 AM »

my next psp is going to have a see thru yellow case with purple sound reactive LEDs can't wait to order the parts and get it started

CLEAR COLORED 1000 CASES HAVE BOUGHT FROM HERE BEFORE PRETTY GOOD QUALITY
http://cgi.ebay.com/SONY-PSP-1000-FRONT-BACK-FACEPLATE-BUTTONS-crystal-gift_W0QQitemZ180317572210QQihZ008QQcategoryZ139969QQssPageNameZWDVWQQrdZ1QQcmdZViewItem

TheZap · « **Reply #26 on:** February 28, 2009, 09:46:44 AM »

Quote from: krazyone2006 on February 28, 2009, 09:40:51 AM

my next psp is going to have a see thru yellow case with purple sound reactive LEDs can't wait to order the parts and get it started

ya... have fun with that

Blazinkaos · « **Reply #27 on:** February 28, 2009, 10:04:26 AM »

Quote from: krazyone2006 on February 28, 2009, 09:40:51 AM

my next psp is going to have a see thru yellow case with purple sound reactive LEDs can't wait to order the parts and get it started

i dnt think they sell those kind of cases if they do ill be surprised..

krazyone2006 · « **Reply #28 on:** February 28, 2009, 11:37:19 PM »

i've seen alot of colored see thru phat replacment shells are all over the net i just ordered a orange one for somebody who wanted the orange see thru shell and amber LEDs

Blazinkaos · « **Reply #29 on:** March 01, 2009, 07:15:28 AM »

Wow cuz onlys ones i have ever seen is see through clear witch is white and blue thats all. Think it would be good to post those sites that have them this may help others in the future.

TheZap · « **Reply #30 on:** March 01, 2009, 09:05:27 AM »

Quote from: Blazinkaos on March 01, 2009, 07:15:28 AM

Wow cuz onlys ones i have ever seen is see through clear witch is white and blue thats all. Think it would be good to post those sites that have them this may help others in the future.

Ya, Ive only seen blue too, probibly cuz nobody usually wants any other colors..,
So, ApheX, that your finnal choice?

Blazinkaos · « **Reply #31 on:** March 01, 2009, 01:38:11 PM »

yea well what is his final choice i havent seen him decide yet.

ApheX · « **Reply #32 on:** March 08, 2009, 03:50:06 AM »

I wouldn't mind knowing where those cases are at as well. thanks for all your help people. my plan keeps changing but i will post up some pictures of the latest updates for this console. so far the umd door has been worked on and a speaker grill been fitted.

-Edit-

Ok this is what i'm planing for the back to look like. still a working progress tho.

EliteGamer83 · « **Reply #33 on:** March 08, 2009, 10:05:01 AM »

I would say Navy blue and silver.

Blazinkaos · « **Reply #34 on:** March 08, 2009, 12:51:48 PM »

oo nice aphex thats liek better then my grill i like it.

THis is what mine looks like.

News:

Author Topic: You decide (Read 9615 times)