Author Topic: 100 uF capacitor (Read 7025 times)

atomicareprise · « **on:** February 23, 2009, 03:23:49 AM »

i need the 100 uF capacitor for this mod

but when i'm asking this to the electronics shop they are asking me "what volts you

need"?so what volts do i need for this mod??thanks guys

rceckspurt13 · « **Reply #1 on:** February 23, 2009, 06:02:07 AM »

You need at least 5 volts. My experience shows that being way over that is sometimes benificial. I use 10 volt ones at the time I made the diagram. I've also used 16 volt and they also work fine. I'd suggest one of those.

PhenomenalDesigns · « **Reply #2 on:** February 23, 2009, 11:29:03 AM »

atomic, basically, the voltage you dont have to worry about, you only need the voltage to be higher than what your working with (As the voltage is the highest voltage they can cope with) so If i was you, get 16v, they are by far the most common and cheapest (And smallest)

rgarjr · « **Reply #3 on:** February 23, 2009, 01:41:15 PM »

What u need that cap on that speaker for? high or low pass filter?

rceckspurt13 · « **Reply #4 on:** February 23, 2009, 03:47:41 PM »

The capacitor blocks the foreward voltage to the speaker. This prevents you from getting distortion or annoying noises in the speaker.

atomicareprise · « **Reply #5 on:** February 23, 2009, 10:11:02 PM »

thanks guys...

rceckspurt13 · « **Reply #6 on:** February 23, 2009, 10:17:21 PM »

Quote from: atomicareprise on February 23, 2009, 10:11:02 PM

thanks guys...

Anytime. I'm glad to help.

PhenomenalDesigns · « **Reply #7 on:** February 23, 2009, 11:41:45 PM »

Quote from: rceckspurt13 on February 23, 2009, 03:47:41 PM

The capacitor blocks the foreward voltage to the speaker. This prevents you from getting distortion or annoying noises in the speaker.

Why not just use a diode?

rceckspurt13 · « **Reply #8 on:** February 24, 2009, 05:57:56 AM »

Because a diode in one direction will block all voltage coming through. Therefore you get no sound. Put it the other way, and all power goes through. Thats what we are trying to stop in the first place. The capacitor just absorbs the extra electricity that would be making noises in the speaker.

psp339 · « **Reply #9 on:** February 25, 2009, 01:02:55 AM »

I just ordered 10 100uf 10v capacitors from mouser to try this mod out. I already have a few LM386.
EDIT: These came today and they are no good for this mod.

It still sounds fuzzy and it sounds horrible. Wiring the speaker in parallel is much better... Wasted my money on something that won't work for this mod.

Blazinkaos · « **Reply #10 on:** March 18, 2009, 11:40:47 AM »

Hmm i know its been a few weeks since this has had a post on but i got question what you want to add 3 more speakers does that mean you add a 100uf(16v) to each speaker.

rceckspurt13 · « **Reply #11 on:** March 18, 2009, 04:08:29 PM »

Yeah add one to each speaker.

psp339: the caps work fine. I've used this method many times. You probably had them In backwards. Put the - side to the speaker.

Blazinkaos · « **Reply #12 on:** March 18, 2009, 05:13:46 PM »

Ok so i just need 16v 100uf and for the resistor you really need that for the leds.

rceckspurt13 · « **Reply #13 on:** March 18, 2009, 08:57:24 PM »

Blazinkaos · « **Reply #14 on:** March 19, 2009, 10:18:16 AM »

hmm on the diagram doesnt say what volts is going to the leds im guess its 3.0 cuz its using the volts from the speaker.

DiscEngine · « **Reply #15 on:** March 23, 2009, 10:34:25 AM »

Will 100uf 10v work on this mod.

PhenomenalDesigns · « **Reply #16 on:** March 23, 2009, 12:37:28 PM »

Quote from: rceckspurt13 on February 24, 2009, 05:57:56 AM

Because a diode in one direction will block all voltage coming through. Therefore you get no sound. Put it the other way, and all power goes through. Thats what we are trying to stop in the first place. The capacitor just absorbs the extra electricity that would be making noises in the speaker.

Oh, i thought u guys meant u want the voltage to only go one way, and only that lol

Quote from: DiscEngine on March 23, 2009, 10:34:25 AM

Will 100uf 10v work on this mod.

Yes

Blazinkaos · « **Reply #17 on:** March 23, 2009, 04:04:11 PM »

Pretty much this is for the speakers not loose there loudness when connected to multiple speakers.

DiscEngine · « **Reply #18 on:** March 23, 2009, 04:49:19 PM »

I guess seems that way to me.

Blazinkaos · « **Reply #19 on:** March 25, 2009, 08:07:25 AM »

So im going to redo a mod i did long ago add these 100uf 10v to them take look how i have it set up. This is what i have so far.

rceckspurt13 · « **Reply #20 on:** March 25, 2009, 11:59:10 AM »

that looks good. Just remember to put the - side of the cap to the speaker and the + to the source.

Also, where did you get the mesh material that is around the center speaker?

Blazinkaos · « **Reply #21 on:** March 25, 2009, 04:26:28 PM »

ok now does it matter with tip of the uf i use to connect to what. i still need to figure whats the positive and negative ends on these speakers cuz there not marked. i got my mesh from a old portable cd player it was no good and that so i used parts from it even the uf i got from it as well.

rceckspurt13 · « **Reply #22 on:** March 25, 2009, 05:15:05 PM »

well for the speakers it shouldn't matter which side you use as the + or - . Also the cap has the - side marked with a white stripe and a - sign.

You want to put the cap on the + side of the speaker. Attach the - side to the speaker and the + side to the + leading to the speaker.

Blazinkaos · « **Reply #23 on:** March 25, 2009, 05:33:01 PM »

you lost me me on the second part so i thought its like the pic you connect one uf to each + of the speaker and then connect all the - ends of the uf together

rceckspurt13 · « **Reply #24 on:** March 25, 2009, 08:34:34 PM »

Not exactly. Just do it like the picture is. The capacitor will only work correctly one way. The - side needs to go away from the speaker.

Blazinkaos · « **Reply #25 on:** March 25, 2009, 09:33:07 PM »

Ok welli went and edited the pic in the way i want it idk if its all correct. I work better with pics so yea take a look.

Also the uf - is the side where the arrows are points down at right.

rceckspurt13 · « **Reply #26 on:** March 25, 2009, 10:07:34 PM »

Yep that's exactly right.

Blazinkaos · « **Reply #27 on:** March 25, 2009, 10:12:52 PM »

you serious i didnt even have to make you break a sweat lol

rceckspurt13 · « **Reply #28 on:** March 26, 2009, 05:54:21 AM »

Well I've built my own speakers for my iPod before. I used the method above and it works very well for me. Even the speakers I bought use the same thing. A 100uf cap after the amps.

Blazinkaos · « **Reply #29 on:** March 26, 2009, 08:19:28 AM »

nice so this my psp is going to pretty much be loader then before thats tight

rceckspurt13 · « **Reply #30 on:** March 26, 2009, 09:52:11 PM »

Well adding the capacitors alone will not make the speakers any louder. You need the amp to go along with them.

Blazinkaos · « **Reply #31 on:** March 26, 2009, 11:30:38 PM »

oh ok i have that so im good to go.

rceckspurt13 · « **Reply #32 on:** March 27, 2009, 12:07:33 PM »

Alright hope all goes well

News:

Author Topic: 100 uF capacitor (Read 7025 times)