Author Topic: Question about cr-3100 internal  (Read 835 times)

Offline nammyboi

  • Guppy
  • *
  • Posts: 3
  • Post quality +0/-0
Question about cr-3100 internal
« on: February 23, 2009, 09:10:47 PM »
I recently internalized my cr-3100 into my psp; however, i just noticed that the loading (little circle) keeps on going everytime i close the umd cover.  I was reading somewhere there being a switch to tell the psp that the umd drive is still in it.  Can anyone give me the location of the switch? thanks

EDIT: I just noticed that while closing the UMD door there's a little pin that gets pressed down telling my psp that there is a UMD drive in there when there really isnt.  Should i dremmel the UMD door so it will not press on it?
« Last Edit: February 23, 2009, 09:21:52 PM by nammyboi »

Offline ApheX

  • Club AM VIP
  • Millennium Poster
  • *
  • Posts: 1094
  • Post quality +1/-0
  • Gender: Male
  • PSP And PSP Slim Case/Hardware Modder
    • ApheX MoDs
Re: Question about cr-3100 internal
« Reply #1 on: February 24, 2009, 01:22:42 AM »
I removed the swich and found it resolved the problem. If your not going to reinstall the umd drive on yourpsp i would recommend just taking out the swich or trimming it.

 

SMF spam blocked by CleanTalk
SimplePortal 2.3.5 © 2008-2012, SimplePortal