Author Topic: Mulit color mem stick led  (Read 1002 times)

Offline Mxr708

  • Fart Sniffer
  • *
  • Posts: 43
  • Post quality +0/-0
  • Gender: Male
Mulit color mem stick led
« on: March 08, 2009, 06:50:38 PM »
Would it be possible to wire to leds to the mem stick.  If you were to wire them to a switch with the middle pin as ground and the outside pins as a ground going to the leds.  Then have + going from the board to both leds.  Here is a diagram that may make it a bit clearer.

NOTE:  I accidently put 3 pos switch on the pic but it would only be a 2 pos.

<iframe src="http://gamercard.xbox.com/VolcomSkater708scrolling="no" frameBorder="0" height="140" width="204">VolcomSkater708</iframe>

Offline DarkShot

  • I approve your mom
  • Acid Modder
  • *
  • Posts: 781
  • Post quality +0/-0
  • Gender: Male
  • ÜBERRAPESKILLETS
Re: Mulit color mem stick led
« Reply #1 on: March 08, 2009, 06:54:48 PM »
Indeed it would be.

F00 did something similar using an electronic switch, but it's fully possible.

Offline Mxr708

  • Fart Sniffer
  • *
  • Posts: 43
  • Post quality +0/-0
  • Gender: Male
Re: Mulit color mem stick led
« Reply #2 on: March 08, 2009, 06:57:23 PM »
COOL Im going to order the stuff to do it.  I will post pics and maybe a tutorial when im done
<iframe src="http://gamercard.xbox.com/VolcomSkater708scrolling="no" frameBorder="0" height="140" width="204">VolcomSkater708</iframe>

Offline Jumbo

  • Dr. Mod
  • BST BAN
  • Around the block
  • *
  • Posts: 2399
  • Post quality +0/-3
Re: Mulit color mem stick led
« Reply #3 on: March 09, 2009, 02:04:01 PM »
f00 used a pic bro
Indeed it would be.

F00 did something similar using an electronic switch, but it's fully possible.
Im pretty sure f00 used a pic :D

And yeah that looks right to me Good luck :)

 

SMF spam blocked by CleanTalk
SimplePortal 2.3.5 © 2008-2012, SimplePortal