Author Topic: MY PSP MODDING STEPS (Read 17363 times)

EliteGamer83 · « **Reply #30 on:** March 25, 2009, 01:03:08 PM »

Yeah it's a LITTLE thin but it will be fine if you glue it in.

DIY PSP UMD Door Jewel by EliteGamer

Blazinkaos · « **Reply #31 on:** March 25, 2009, 04:29:44 PM »

i know it can be done cuz i can do it as well elite but i prefer plexi glass cuz it picks up light much better.

EliteGamer83 · « **Reply #32 on:** March 25, 2009, 05:45:54 PM »

Here another one

Another DIY Custom PSP UMD Door Jewel by EliteGamer83

bustinthejustin · « **Reply #33 on:** March 25, 2009, 05:50:57 PM »

how u etching these?

EliteGamer83 · « **Reply #34 on:** March 25, 2009, 06:03:53 PM »

I made a video,

kind long though and still in the camera, I use a drill press, different types of bits, my hands and a dremel with pen, sanding, grinding, and cutting discs.

But after I shape the circle I just drag it around under my drill press and before I start that I lightly etch outlines with a pen knife

EliteGamer83 · « **Reply #35 on:** March 25, 2009, 06:05:22 PM »

Even if they suck they are really REALLY fun to make! =D

Ooppsss double post, my bad

redrider · « **Reply #36 on:** March 25, 2009, 06:08:14 PM »

Hey guys..I was gluing my jewel in place with some super glue and I got it in and all but i accidentally got a bit of glue on the jewel. You cant really notice it unless you look for it but I just want to try and get it off. What works well to get supper glue off acrylic if anything?

EliteGamer83 · « **Reply #37 on:** March 25, 2009, 06:27:41 PM »

Nail Polish remover.

bustinthejustin · « **Reply #38 on:** March 25, 2009, 06:38:08 PM »

yup. anything with acetone.

Blazinkaos · « **Reply #39 on:** March 25, 2009, 06:41:54 PM »

mine isnt that bad and all i used was a .35mm bit

Quote from: EliteGamer83 on March 25, 2009, 05:45:54 PM

Here another one

Another DIY Custom PSP UMD Door Jewel by EliteGamer83

its cool but still prefer plexi glass...

EliteGamer83 · « **Reply #40 on:** March 25, 2009, 08:18:01 PM »

Yeah me too but i don't have any lol

rgarjr · « **Reply #41 on:** March 25, 2009, 08:27:52 PM »

wonder if anyone ever tried to etch a shape on their jewel using some kind of acid or chemicals.

EliteGamer83 · « **Reply #42 on:** March 25, 2009, 08:44:09 PM »

Quote from: rgarjr on March 25, 2009, 08:27:52 PM

wonder if anyone ever tried to etch a shape on their jewel using some kind of acid or chemicals.

I'm sure there's a dangerous way of doing that but I am not gonna try

Blazinkaos · « **Reply #43 on:** March 25, 2009, 09:40:36 PM »

Quote from: rgarjr on March 25, 2009, 08:27:52 PM

wonder if anyone ever tried to etch a shape on their jewel using some kind of acid or chemicals.

i heard stories that glass etching could possibly work but then i heard results it doesnt. i also searched one time and found that nail polish remover works as well if you leave under a ho lamp then whip it away but i tested no good.
elite you can get plexi glass at home depot for couple bucks 11x8 sheet

EliteGamer83 · « **Reply #44 on:** March 26, 2009, 05:20:51 AM »

Cool thanks,

I have other things I need to spend money on right now though lol.

Blazinkaos · « **Reply #45 on:** March 26, 2009, 08:16:22 AM »

lol dnt waste all of it bag habit

EliteGamer83 · « **Reply #46 on:** March 26, 2009, 08:21:08 AM »

nah, I need to buy alot of modding supplies though cause I don't own any of em' I bought some wire already, now I nede some resistors, LEDs, flux, fader chip,

Blazinkaos · « **Reply #47 on:** March 26, 2009, 08:24:02 AM »

oo thats what ur referring to i c yea you need those stick up i got tons of wire and resistors and so on...i have 3000 feet of 38 gauge wire ill never run for very long time..

lookkool3 · « **Reply #48 on:** March 26, 2009, 10:52:56 AM »

Quote from: rgarjr on March 25, 2009, 08:27:52 PM

wonder if anyone ever tried to etch a shape on their jewel using some kind of acid or chemicals.

im going to try that on glass make some glass jewels with acid etched designs i'll let you guys know if it works

ryan · « **Reply #49 on:** March 26, 2009, 10:55:16 AM »

Quote from: Blazinkaos on March 26, 2009, 08:24:02 AM

oo thats what ur referring to i c yea you need those stick up i got tons of wire and resistors and so on...i have 3000 feet of 38 gauge wire ill never run for very long time..

38 gauge holy crap that must be thinner than a strand of hair. You better be careful though cause if you put more than a led or two you will need thicker wire. But to go with this topic i saw that kid with the silver psp with a ring of light looked like he had cut the psp letters out and thats what i wanna do either what he did or just cut the letters out and put some leds behind them. It would be hard but i thought about doing the same with the psp on the front over the home bar strip.

Blazinkaos · « **Reply #50 on:** March 26, 2009, 10:55:43 AM »

Quote from: ryan on March 26, 2009, 10:55:16 AM

38 gauge holy crap that must be thinner than a strand of hair. You better be careful though cause if you put more than a led or two you will need thicker wire. But to go with this topic i saw that kid with the silver psp with a ring of light looked like he had cut the psp letters out and thats what i wanna do either what he did or just cut the letters out and put some leds behind them. It would be hard but i thought about doing the same with the psp on the front over the home bar strip.

hey 38 works for me.
yea i did that i drilled out the letter to have the leds shine behind and show the psp working.

wait on glass or plexi glass cuz it work on glass then again why would you want a glass jewel...

krazyone2006 · « **Reply #51 on:** March 26, 2009, 12:31:23 PM »

yeah the first time you drop that psp the glass jewel is going to shatter or sit it down to hard on the jewel and its history

rgarjr · « **Reply #52 on:** March 26, 2009, 12:52:50 PM »

I wanna see some pics of the router'ed out PSP letters.

Its a cool concept but the PSP letters are just too small to be able to work on them, in my opinion.

Blazinkaos · « **Reply #53 on:** March 26, 2009, 01:02:15 PM »

Quote from: rgarjr on March 26, 2009, 12:52:50 PM

I wanna see some pics of the router'ed out PSP letters. Its a cool concept but the PSP letters are just too small to be able to work on them, in my opinion.

Ok ill upload some pics of it today..

lookkool3 · « **Reply #54 on:** March 26, 2009, 01:58:44 PM »

glass is good and bad in lots of ways...

bustinthejustin · « **Reply #55 on:** March 26, 2009, 02:10:34 PM »

Quote from: rgarjr on March 26, 2009, 12:52:50 PM

I wanna see some pics of the router'ed out PSP letters. Its a cool concept but the PSP letters are just too small to be able to work on them, in my opinion.

with a small dremel cut off wheel or even a drill bit you could cut out the basic shape and then file it off

Blazinkaos · « **Reply #56 on:** March 27, 2009, 12:05:10 AM »

heres some more pics of it.
and yea i used a .35 bit for a dremel to do this wasnt easy.

rgarjr · « **Reply #57 on:** March 27, 2009, 12:06:59 AM »

not bad bro, looks pretty good. Any dark pics with them LEDs glowing?

Blazinkaos · « **Reply #58 on:** March 27, 2009, 01:38:13 AM »

not yet ill be placing leds in there should like the ring and the psp letters

krazyone2006 · « **Reply #59 on:** March 27, 2009, 06:24:51 AM »

heres one i am doing for someone similar to that its not perfect lettering cause the kid wants a graffiti writing look

hers the dremel bit i used to do it

News:

Author Topic: MY PSP MODDING STEPS (Read 17363 times)