Ok got a couple questions, hopefully people actually look in this catagory. Well i was waiting for my case to dry paint wise and i decided to screw around with the fan and try to see if i could run a better one. So i for a few hours i hooked up dual fans both stock ps2 fans and they worked so i decided to try and set up an led in the lineup. I did it and then nothing worked. I put just one fan in the stock and the fan wouldnt work. i tested the voltage and nothing was being put out. the ps2 works and everything but i have no fan except thought usb. I would like to know another spot that had an output of like 12 or higher volts ac or dc for a fan and some leds. And yes i alredy checked the switch, its putting out 117volts, too much obviously. And help is much appreciated. the pins arent bent either their all fine.
