Author Topic: Sound Reactive LED Mod (Read 159999 times)

zal · « **Reply #240 on:** August 04, 2007, 07:32:56 AM »

just try it,maybe it will work, thats all

Dracrius · « **Reply #241 on:** August 04, 2007, 08:24:40 AM »

ok well um which ones right and which ones left

Dracrius · « **Reply #242 on:** August 04, 2007, 08:36:51 AM »

Wow srry I just read at the begining of this that you can just wire it to the mobo to get it to work for both internal and external is this true and if so what is the mobo?

DubbleDutch · « **Reply #243 on:** August 04, 2007, 08:44:33 AM »

Quote from: Loser777 on June 29, 2007, 11:50:29 AM

Mine is almost done, but I need to get my LCD connector fixed which means a new one has to be soldered on... I only have one LED on now because one of them fell on the floor >< and they are impossible to find.

get a big magnet and go around on the floor
the leds will stick to the magnet

that is how i found my fallen led :P

Dracrius · « **Reply #244 on:** August 04, 2007, 08:52:23 AM »

found out wat mobo was da! srry but wat do i wire it to

zal · « **Reply #245 on:** August 04, 2007, 09:36:56 AM »

blue r '-' n reds r '+',may i ask y do need left or right... if u use 1 ic just connect to ant one of the reds,it doesnt matter...

Dracrius · « **Reply #246 on:** August 04, 2007, 09:47:30 AM »

oh um I want left and right because I want to run stereo and I want the light in my left triger to match the sound from my left speaker and so on. But I know how to wire it to the earphone jack but it seems to say I could just wire it to the mobo to get the reaction with and without earphones (stated on first page) and I want to know where to wire it to the mother board for that.

zal · « **Reply #247 on:** August 04, 2007, 08:16:18 PM »

ermm... thats direct connection, theres a thread abt it.... lenne search ok...
ok, heres the link=https://www.acidmods.com/forum/index.php?topic=7661.0

alberttan916 · « **Reply #248 on:** August 05, 2007, 07:56:46 AM »

will my sound mod trigger light be on if i in the mute ?

Dracrius · « **Reply #249 on:** August 05, 2007, 08:14:47 AM »

No wat I want to know goes with wat cyberpyrot said in the very first post "Theoreticaly you should be able to wire it to the speaker wire but it will only work for the external speakers.. For both head phones and internal speaker will require you to remove the mobo.." I want to know how to do that and how to do it stereo with the ICs

zal · « **Reply #250 on:** August 06, 2007, 01:46:19 AM »

Quote from: alberttan916 on August 05, 2007, 07:56:46 AM

will my sound mod trigger light be on if i in the mute ?

yup it still works but it wont blink coz theres no sounds...(i mean 4 the direct connection)

alberttan916 · « **Reply #251 on:** August 06, 2007, 07:42:44 AM »

Quote from: zal on August 06, 2007, 01:46:19 AM

yup it still works but it wont blink coz theres no sounds...(i mean 4 the direct connection)

so with ICs wan will it light up ?

Altes · « **Reply #252 on:** August 06, 2007, 10:33:33 AM »

Quote from: alberttan916 on August 06, 2007, 07:42:44 AM

so with ICs wan will it light up ?

With ICs it won't light up when there isn't sound, it'll only "pulse" when there is. With a direct connection it'll light up even if there isn't sound and it'll "pulse" when there is. Downside with a direct connection is it'll be a lot dimmer.

zal · « **Reply #253 on:** August 07, 2007, 01:08:59 AM »

Quote from: Altes on August 06, 2007, 10:33:33 AM

With ICs it won't light up when there isn't sound, it'll only "pulse" when there is. With a direct connection it'll light up even if there isn't sound and it'll "pulse" when there is. Downside with a direct connection is it'll be a lot dimmer.

correcto altes!!!

gundamseedes · « **Reply #254 on:** August 07, 2007, 07:52:30 AM »

Hmm i tried installing this on a ta082 version.. the wifi chip seems abit bigger and any of you can explain to me whats the difference between the stereo one and the non stereo one.. for the stereo one i cant find a space to put the chip on the right side

gundamseedes · « **Reply #255 on:** August 07, 2007, 09:35:07 AM »

how do i also tell between the positive and negative sides of the led

zal · « **Reply #256 on:** August 07, 2007, 10:36:29 AM »

hmmmm

me never have me hands in the stereo ic....
ill search me local electronics shop 4 it 2morrow and test it

h4x0r911 · « **Reply #257 on:** August 07, 2007, 11:29:22 AM »

k i just completed the sound mod using this

:

http://www.mouser.com/search/ProductDetail.aspx?R=526-NTE823

and now im sure all my wiring is good! the only different thing is i have a switch on my 5v wire. which shouldn't make a difference! after wiring and everything i turn the psp on a the leds are on all the time but fadish and when i play music they react. i like it this way but i wonder if the

is working properly, because the lights should only be on when the psp has music playing.

does any 1337 here like cyberpyrot have an explaination. is it possible the

is not working properly and has made a direct connection. i won't be able to compare the brightness till i finish with the leds that are direct power and going on my dpad and x,o, etc.

but i can assure that my wiring was all good no shorts as i did a very clean job, double checked everything! so it very hard for me to have messed up in making a short or something. but there is always a chance.

will get a picture and video of it up soon when im done my mod (warning it will be webcam)

u think u guys will be able to tell by its brightness?

Altes · « **Reply #258 on:** August 07, 2007, 12:16:04 PM »

Quote from: gundamseedes on August 07, 2007, 09:35:07 AM

how do i also tell between the positive and negative sides of the led

If you get a huge magnifying glass and flip the led on its backside, you'll see a little arrow pointing in one direction. That's the negative side.

Quote from: h4x0r911 on August 07, 2007, 11:29:22 AM

k i just completed the sound mod using this :

http://www.mouser.com/search/ProductDetail.aspx?R=526-NTE823

and now im sure all my wiring is good! the only different thing is i have a switch on my 5v wire. which shouldn't make a difference! after wiring and everything i turn the psp on a the leds are on all the time but fadish and when i play music they react. i like it this way but i wonder if the is working properly, because the lights should only be on when the psp has music playing.

does any 1337 here like cyberpyrot have an explaination. is it possible the is not working properly and has made a direct connection. i won't be able to compare the brightness till i finish with the leds that are direct power and going on my dpad and x,o, etc.

but i can assure that my wiring was all good no shorts as i did a very clean job, double checked everything! so it very hard for me to have messed up in making a short or something. but there is always a chance.

will get a picture and video of it up soon when im done my mod (warning it will be webcam)

u think u guys will be able to tell by its brightness?

=O I WANNA DO THAT xD IC with fadish lights and pulses

Did you use the same resistors as in the tut? Or maybe the LEDs have a low voltage forward rating?

h4x0r911 · « **Reply #259 on:** August 07, 2007, 03:03:39 PM »

i no that is supposed to be when its a direct wiring to speakers. but i still used the

and its like that! i wanted it that way but chose to use

for brightness and i luckily even got that feature.

i did everything correctly, right resistors and everything.

btw at the end of the mod i ended up with one positive wire to which i wired the leds and then i used the same 5v sources ground for the leds.

is that right? i could use any ground right?

Altes · « **Reply #260 on:** August 07, 2007, 08:50:06 PM »

Quote from: h4x0r911 on August 07, 2007, 03:03:39 PM

i no that is supposed to be when its a direct wiring to speakers. but i still used the and its like that! i wanted it that way but chose to use for brightness and i luckily even got that feature.

i did everything correctly, right resistors and everything.

btw at the end of the mod i ended up with one positive wire to which i wired the leds and then i used the same 5v sources ground for the leds.

is that right? i could use any ground right?

Yup you can use any ground. They're all the same: 0v

gundamseedes · « **Reply #261 on:** August 08, 2007, 04:12:42 AM »

technically my led doesnt have an arrow so how do i tell .. dang

Rowley · « **Reply #262 on:** August 08, 2007, 04:19:26 AM »

If it's and SMD or SMT LED it will have an arrow, if it's one of the bigger styles then I think it's the longer leg which is the positive one.

nismo300zx · « **Reply #263 on:** August 08, 2007, 04:38:07 AM »

anyone having problems with the ic not working? ive set up mine so its just direct led to speakers. but do want the ligths to blink brighter without the sound all the way up. can someone post a larger picture of the ic completed? i do have all the correct resistors and everything. muchos thanks. and for those who posted up the vids of theirs, they look great. also where is it that you guys are putting your leds?

h4x0r911 · « **Reply #264 on:** August 08, 2007, 07:30:47 AM »

@ Gundamseed

the longer connector end of the led that you see at the back is the negative.

let me know if u want a pic ill find one and circle it.

@

yes as you add more leds you need less resistance as leds them selves are resistance in the circuit. from what i remember someone mentioning at 8 leds u need no resistor. I think for 4 the next closest value is still 10 ohms. u can double check using the resistor calculator:
http://metku.net/index.html?path=mods/ledcalc/index_eng

and info here:
https://www.acidmods.com/Wiki/tiki-index.php?page=Resistors%20and%20calculating%20them.

just calculated ull need 5ohm and the next closest resistor is 5.6ohm, but i would stick with 10ohm.

@nismo
here is the wiki link:
https://www.acidmods.com/Wiki/tiki-index.php?page=PSP%20Sound%20Mod

and here for mono (one speaker) which is easier:

andhere is the diagram for stereo (two speakers):

gundamseedes · « **Reply #265 on:** August 08, 2007, 10:03:23 AM »

now i've assembled everything.. the led is on(the led is also too big) but the only problem is the led that is connected to the speaker, the speaker isnt working.. and i have no idea why. and i cant find a space to put the lm386 chip either

h4x0r911 · « **Reply #266 on:** August 08, 2007, 11:06:45 AM »

the space is under wifi board. and make sure ur speaker is connected to mobo. and make sure ur soldering is clean and the wire of the speaker didn't come off.

use 0603 smd leds which u can get from ebay and mouser.com

DON'T use 3mm or 5mm! way to big!
and look at the soldering smd led tutorial in the wiki!

T3KN1K4L · « **Reply #267 on:** August 08, 2007, 11:17:56 AM »

You can either shoehorn the IC under the WiFi board or you can place it next to the WiFi board as shown in the Wiki...

https://www.acidmods.com/Wiki/tiki-index.php?page=PSP%20Sound%20Mod

h4x0r911 · « **Reply #268 on:** August 08, 2007, 05:22:57 PM »

i think my ic made some direct connection as it seems not to be working. because the leds are quite weak!

anyone know if it is my chip?

Slimby · « **Reply #269 on:** August 08, 2007, 08:41:19 PM »

I managed to fit 3 of the ICs under the wifi board on a TA-082, and a 4 pin dip switch to turn them on. But, of course, the ICs didn't work so I just ripped 'em out and direct wired, because I wanted them to glow slightly anyway.

Slimby

News:

Author Topic: Sound Reactive LED Mod (Read 159999 times)