Author Topic: Dual Nub  (Read 1916 times)

Offline alentris

  • Club AM VIP
  • Acid Modder
  • *
  • Posts: 727
  • Post quality +0/-0
  • Gender: Male
  • Bleep-Bloop.
Dual Nub
« on: June 04, 2009, 03:07:49 PM »
I have a question on the dual nub. Do I have to use a phat nub?? because the phat doesn't have a silver nub as far as I know, and I want it to match the existing. Or, does the top part for the slim fit onto the phat nub??

Thanks to HiddenVenom for the sig!

Offline Blazinkaos

  • Technology Revolution
  • Art & Theme Team
  • E = MC² Mad Scientist
  • *
  • Posts: 2259
  • Post quality +12/-0
  • Gender: Male
  • Time Passes Will You
    • ROOKIE BUILDERS DISCORD
Re: Dual Nub
« Reply #1 on: June 04, 2009, 09:58:16 PM »
I believe it should i never tested both of them on each other. Have to tested it just to see.

*Thanks Modders/Friends:Ghost_Death, gr8npwrfl, Blizzrad, Kenshinffx.
*Thanks 802Chives for the Art position!

Offline alentris

  • Club AM VIP
  • Acid Modder
  • *
  • Posts: 727
  • Post quality +0/-0
  • Gender: Male
  • Bleep-Bloop.
Re: Dual Nub
« Reply #2 on: June 05, 2009, 03:04:55 PM »
I believe it should i never tested both of them on each other. Have to tested it just to see.
Are you saying about the color of the nub? or using an actual slim nub for the razor x...

Thanks to HiddenVenom for the sig!

Offline GhoSt

  • Creating Null
  • Around the block
  • *
  • Posts: 2552
  • Post quality +19/-0
  • Gender: Male
  • Null Pointer Exception
Re: Dual Nub
« Reply #3 on: June 05, 2009, 04:20:53 PM »
I have never disasembled a slim nub, but I no for a fact the razor and a2d were designed for the phat nub, and the chances that the slim nub has a spring and casing that will fit exactly onto the board are minimal. Isn't it posible to just clip the nubby top bit of your colour onto a phat analog?
|Variegation - GhoSt's Final Controller|

|Nothing is deterministic.|

Offline maelo0525

  • Guppy
  • *
  • Posts: 7
  • Post quality +0/-0
  • Gender: Male
  • Acidmods User
Re: Dual Nub
« Reply #4 on: June 05, 2009, 04:39:11 PM »
yes tested it and they do fit

Offline alentris

  • Club AM VIP
  • Acid Modder
  • *
  • Posts: 727
  • Post quality +0/-0
  • Gender: Male
  • Bleep-Bloop.
Re: Dual Nub
« Reply #5 on: June 05, 2009, 06:43:18 PM »
yes tested it and they do fit
good, because there is no silver phat nub :D thanks for the input.

Thanks to HiddenVenom for the sig!

Offline GhoSt

  • Creating Null
  • Around the block
  • *
  • Posts: 2552
  • Post quality +19/-0
  • Gender: Male
  • Null Pointer Exception
Re: Dual Nub
« Reply #6 on: June 05, 2009, 09:48:45 PM »
its not about fitting it, Its about it being compatable with a razor.
|Variegation - GhoSt's Final Controller|

|Nothing is deterministic.|

Offline EliteGamer83

  • Millennium Poster
  • *
  • Posts: 1233
  • Post quality +0/-0
  • Gender: Male
  • Trusted Seller! Slim Modder! Graphics Artist!
Re: Dual Nub
« Reply #7 on: June 06, 2009, 06:27:04 AM »
Wait, what is the point of disassembling the powerboard? It looks to me as if it has nothing to do with the razor...

Offline alentris

  • Club AM VIP
  • Acid Modder
  • *
  • Posts: 727
  • Post quality +0/-0
  • Gender: Male
  • Bleep-Bloop.
Re: Dual Nub
« Reply #8 on: June 06, 2009, 06:29:50 AM »
Wait, what is the point of disassembling the powerboard?
where did that come from??

 :faint: What I basically want to know:

1. Is it possible to use a slim analog stick with the razor x
2. Does the colored nub on the top of the slim analog stick fit onto the phat analog stick.

Thanks to HiddenVenom for the sig!

Offline EliteGamer83

  • Millennium Poster
  • *
  • Posts: 1233
  • Post quality +0/-0
  • Gender: Male
  • Trusted Seller! Slim Modder! Graphics Artist!
Re: Dual Nub
« Reply #9 on: June 06, 2009, 06:36:15 AM »
where did that come from??

 :faint: What I basically want to know:

1. Is it possible to use a slim analog stick with the razor x
2. Does the colored nub on the top of the slim analog stick fit onto the phat analog stick.

Oh sorry, I thought this was my Dual Nub thread, my bad..

I don't think so, it was designed for a phat.

Offline bustinthejustin

  • Registered BST
  • E = MC² Mad Scientist
  • *
  • Posts: 2326
  • Post quality +1/-0
  • Gender: Male
Re: Dual Nub
« Reply #10 on: June 06, 2009, 12:11:09 PM »
No the razorX won't fit a slim analog, and I'm pretty sure you have to mod a slim nub top to fit it on a phat nub.

Sig by Kenshinffx - Thanks!

Offline Blazinkaos

  • Technology Revolution
  • Art & Theme Team
  • E = MC² Mad Scientist
  • *
  • Posts: 2259
  • Post quality +12/-0
  • Gender: Male
  • Time Passes Will You
    • ROOKIE BUILDERS DISCORD
Re: Dual Nub
« Reply #11 on: June 07, 2009, 09:05:17 PM »
The only different is the top moves so thats an issue and it has the extra plastic or the pins sticking out of it.

*Thanks Modders/Friends:Ghost_Death, gr8npwrfl, Blizzrad, Kenshinffx.
*Thanks 802Chives for the Art position!

 

SMF spam blocked by CleanTalk
SimplePortal 2.3.5 © 2008-2012, SimplePortal