Author Topic: Modding steps, 1st PSP Slim with BUILT IN BATTERY,  (Read 5960 times)

Offline mastapsp

  • Ω Allumnist Ω
  • *
  • Posts: 102
  • Post quality +0/-0
  • Gender: Male
  • Acidmods User
Modding steps, 1st PSP Slim with BUILT IN BATTERY,
« on: June 22, 2009, 09:12:10 PM »
TO CHANGE THE SUBJECT, WOULD THIS WORK, OR HAS IT BEEN TRIED, ADDING AN ADDITIONAL JACK
,
<img src="http://i40.tinypic.com/1y5m6r.jpg" border="0" alt="Image and video hosting by TinyPic">[/url]
THE BOX WITH 3 WIRES IS A TRANSISTOR, I THINK THE JACK MAY ALSO NEED A RESISTOR



I will be updating pictures, as soon as I progress on this build

I have always wanted to do a psp with a camera and sd reader, but didn't want to sacrifice the UMD drive,
I am going to attempt to build the battery into the psp, behind the memory card reader, so I have room for the camera, and dip switches in the battery compartment, and might attemt a single SD card Reader.

Mods:
Wite Case
Pandora battery switch
Built in mic
8 or more sound reactive LED's
Built in Camera
single sd card slot


Played around with it and got the battery to fit, just had to cut through the wall, and take some off the umd door, but it will play the umd fine, only loss in this build will be the mem stick door wont slide  out( any ideas on a alternative besides just gluing in place, I want mem stick reader to still be functional, cell phone hinge could work but may be too big)

<img src="http://i40.tinypic.com/29dgy7b.jpg" border="0" alt="Image and video hosting by TinyPic">[/url]

June 24- collecting parts, waiting on go cam, will do 6pin or 8 pin dip, may do dual num, going to add 3 more speakers
<img src="http://i41.tinypic.com/n651j5.jpg" border="0" alt="Image and video hosting by TinyPic">[/url]

« Last Edit: June 26, 2009, 10:25:25 PM by mastapsp »

Offline ApheX

  • Club AM VIP
  • Millennium Poster
  • *
  • Posts: 1094
  • Post quality +1/-0
  • Gender: Male
  • PSP And PSP Slim Case/Hardware Modder
    • ApheX MoDs
Re: Modding steps, 1st PSP Slim with BUILT IN BATTERY,
« Reply #1 on: June 23, 2009, 11:31:32 AM »
Interesting idea. To be fair, you could of got the camera and the sd slot in where your placing that internal battery, but i really like the idea. Looking forward to an update on this. Hope it goes well!

Offline mastapsp

  • Ω Allumnist Ω
  • *
  • Posts: 102
  • Post quality +0/-0
  • Gender: Male
  • Acidmods User
Re: Modding steps, 1st PSP Slim with BUILT IN BATTERY,
« Reply #2 on: June 23, 2009, 03:17:23 PM »
but i need at least a 4 pin dip switch for the lights, battery on/off, pandora mode, and camera,
but will probably put in a 8 pin so i can put the mic on it,
the battery compartment also comes up a lot higher than under the mem card, so wasnt sure that the camera would fit

\
To simplify some things, you can just buy a regular/pandora battery from dx
http://www.dealextreme.com/details.dx/sku.15153

There are a couple more of those on the site as well
Yes I am aware of that, but that battery doesn't last half as long as a original, and if its going to be built it it has to last a long time

http://www.psp-hacks.com/2009/01/16/pspnokia-battery-hack-job/

You could try modifying and using a cell phone battery...
Dunno, just throwin' out ideas.

Like the idea, can't wait til your done with this.

Good luck! :D
Interesting idea, but too expensive, not looking to spend much on this build, and a doubt the new owner will care what battery is in there, and if it is any longer than the original battery than I couldn't do it
« Last Edit: June 26, 2009, 10:23:54 PM by mastapsp »

Offline RoBot1ks

  • Club AM VIP
  • Acid Modder
  • *
  • Posts: 671
  • Post quality +0/-0
  • Gender: Male
  • 1 r n00ber
    • Myspace
Re: Modding steps, 1st PSP Slim with BUILT IN BATTERY,
« Reply #3 on: June 23, 2009, 03:50:51 PM »
To simplify some things, you can just buy a regular/pandora battery from dx
http://www.dealextreme.com/details.dx/sku.15153

There are a couple more of those on the site as well

Offline Jumbo

  • Dr. Mod
  • BST BAN
  • Around the block
  • *
  • Posts: 2399
  • Post quality +0/-3
Re: Modding steps, 1st PSP Slim with BUILT IN BATTERY,
« Reply #4 on: June 26, 2009, 08:27:24 AM »
To simplify some things, you can just buy a regular/pandora battery from dx
http://www.dealextreme.com/details.dx/sku.15153

There are a couple more of those on the site as well
All the batteries on DX suck thats why lol. They arent even close to the same as OEM.

Offline Thaiboy

  • ♪♪♪ Tone deff ♪♪♪
  • *
  • Posts: 71
  • Post quality +0/-0
  • Gender: Male
Re: Modding steps, 1st PSP Slim with BUILT IN BATTERY,
« Reply #5 on: June 26, 2009, 10:16:12 PM »
http://www.psp-hacks.com/2009/01/16/pspnokia-battery-hack-job/

You could try modifying and using a cell phone battery...
Dunno, just throwin' out ideas.

Like the idea, can't wait til your done with this.

Good luck! :D

Offline R4p1d

  • ½ Pint
  • *
  • Posts: 30
  • Post quality +0/-0
Re: Modding steps, 1st PSP Slim with BUILT IN BATTERY,
« Reply #6 on: July 06, 2009, 05:23:58 PM »
I may attempt this in my mod, it's a good idea.

Offline W-Gaming5

  • Millennium Poster
  • *
  • Posts: 1129
  • Post quality +1/-0
  • Gender: Male
Re: Modding steps, 1st PSP Slim with BUILT IN BATTERY,
« Reply #7 on: July 06, 2009, 09:28:25 PM »
:censored: :censored: :censored: :censored: :censored:
« Last Edit: July 30, 2012, 01:55:59 AM by W-Gaming5 »
:censored:

Offline R4p1d

  • ½ Pint
  • *
  • Posts: 30
  • Post quality +0/-0
Re: Modding steps, 1st PSP Slim with BUILT IN BATTERY,
« Reply #8 on: July 06, 2009, 09:33:16 PM »
Use the battery holder for his switches/camera for easy access.

Offline W-Gaming5

  • Millennium Poster
  • *
  • Posts: 1129
  • Post quality +1/-0
  • Gender: Male
Re: Modding steps, 1st PSP Slim with BUILT IN BATTERY,
« Reply #9 on: July 06, 2009, 09:37:40 PM »
:censored: :censored: :censored: :censored: :censored: :censored: :censored: :censored: :censored: :censored:
« Last Edit: July 30, 2012, 01:55:48 AM by W-Gaming5 »
:censored:

 

SMF spam blocked by CleanTalk
SimplePortal 2.3.5 © 2008-2012, SimplePortal