Author Topic: How do I flash a xbox hitachi drive? (NOT FOR RIPING GAMES)  (Read 1106 times)

Offline MARIOPARTY53

  • I DONT FAIL
  • BANNED
  • E = MC² Mad Scientist
  • *
  • Posts: 1526
  • Post quality +0/-0
  • Gender: Male
  • Pc Gaming Rules
Ok, I got this hitachi drive out of another xbox. I need to know how to flash so I can play my games on it that I bought as it wont (becuase its needs to be flashed)
any help on this. I would prefer to not buy and chips but If its needed then I can

thanks  :clap: :clap:
However today I was brutally raped by a door handle, and none of my friends helped me up off the floor after ten minutes, instead they all teabaged me, all 10 of them...

Offline krazyone2006

  • PoM PuFFs??
  • Registered BST
  • Granny Spanker
  • *
  • Posts: 385
  • Post quality +0/-0
  • Gender: Male
  • Acidmods User
Re: How do I flash a xbox hitachi drive? (NOT FOR RIPING GAMES)
« Reply #1 on: June 24, 2009, 08:20:35 PM »
you need a VIA 6427 I/O controller (PCI SATA card) or compatable SATA jacks on your PC's motherboard, jungle flasher, and Iextremem 1.6 just got www.360mods.com and they got tutorials on how to do it all thats how i learned to do it good luck with it be careful you don't brick the drive

Offline Jumbo

  • Dr. Mod
  • BST BAN
  • Around the block
  • *
  • Posts: 2399
  • Post quality +0/-3
Re: How do I flash a xbox hitachi drive? (NOT FOR RIPING GAMES)
« Reply #2 on: June 27, 2009, 08:01:12 PM »
Be careful Hitachi is the one and only brickable DVD drive in 360's.

Also there is no 1.6 Ixtreme for Hitachi yet, you need to use 1.51. It does the same thing but you cant rip games off the drive and a couple other small things..

 

SMF spam blocked by CleanTalk
SimplePortal 2.3.5 © 2008-2012, SimplePortal