Author Topic: overclocking question (Read 5625 times)

buffaloclone · « **on:** December 10, 2007, 01:33:53 PM »

im doing a progect for school and ive gota to rescerach but i havent built my comp yet so i need to do "rescearch" and make a hypothasis but ive got no clue so how much faster it will go so can sombody tell me how much faster i should expect it to go.

MattZani · « **Reply #1 on:** December 10, 2007, 01:41:19 PM »

depends on parts, some are crap for OC'ing, Some are bloody amazing.

You need to pair them all together aswell, a great OC'ing CPU will go nowhere with out a great OC'ing Mobo and some flexible Ram.

robin1989 · « **Reply #2 on:** December 10, 2007, 03:03:42 PM »

it seems there are a lot of people asking for the best this or the best for that - maybe someone should just design a thread with a $1500 price or less for each setup and make up specs for best gaming, best OC'ing, best video editing, best general, best word publisher etc

just an idea

torque154 · « **Reply #3 on:** December 10, 2007, 03:04:53 PM »

that is true. I used to have high end board. but then it warped. Got a new one. after that I am not able to OC it as much as I was able to. It's all comes down to Core design. Toledos and Windstars are examples of great cores. The general rule is that pentium series and Athlon X2 series are Great examples for overclocking.

MattZani · « **Reply #4 on:** December 13, 2007, 12:06:55 AM »

if you were to go Quad Core, the Intel Q6600 G0 (G0 is the crucial part) has great overclocking, and the new AMD Phenoms should too, but then you need a board to match as i have already said

robin1989 · « **Reply #5 on:** December 13, 2007, 06:50:09 AM »

if you were to go for that proccesor what motherboard do you recomend

Tec_ · « **Reply #6 on:** December 13, 2007, 07:01:47 AM »

if i understand over clocking you are putting undue stress on your processor. i understand that some people can not afford to spend the money on a better processor. but i would rather have a processor that ran at 3Ghz with out breaking a sweat than strain one to get it to run at the same speed.

robin1989 · « **Reply #7 on:** December 13, 2007, 07:09:51 AM »

what if what your planning on doing is putting it up to lets say 5ghz especially if you have access to liquid nitrogen

Tec_ · « **Reply #8 on:** December 13, 2007, 07:22:16 AM »

well if i had liquid nitrogen i would be flash freezing things and then breaking them

robin1989 · « **Reply #9 on:** December 13, 2007, 07:24:15 AM »

been there done that forgot to get the tshirt

torque154 · « **Reply #10 on:** December 13, 2007, 08:27:12 AM »

Quote from: robin1989 on December 13, 2007, 06:50:09 AM

if you were to go for that proccesor what motherboard do you recomend

Newegg has 7 boards out now.

http://www.newegg.com/Product/Product.aspx?Item=N82E16813131224 I would get this board. there is a lot a crazy stuff, like heatsink for your memory that attaches to the board.

MattZani · « **Reply #11 on:** December 13, 2007, 09:37:47 AM »

that wouldnt work with a Q6600

buffaloclone · « **Reply #12 on:** December 13, 2007, 01:19:09 PM »

so would a nivida board be good? with a AMD dule core?

MattZani · « **Reply #13 on:** December 13, 2007, 01:22:12 PM »

No, Rob wanted a board compatible with the Q6600 (an intel CPU) and torque posted an AMD board

buffaloclone · « **Reply #14 on:** December 13, 2007, 01:45:57 PM »

i actually might get an AMD dule core

torque154 · « **Reply #15 on:** December 14, 2007, 09:33:22 AM »

Woops! I guess he wanted an Intel board. One will be up in a bit

psp339 · « **Reply #16 on:** December 14, 2007, 04:09:22 PM »

For overclocking the Q6600, the Intel P35 chipset is the best. Here are some great ASUS boards:
http://www.newegg.com/Product/Product.aspx?Item=N82E16813131182
http://www.newegg.com/Product/Product.aspx?Item=N82E16813131190
http://www.newegg.com/Product/Product.aspx?Item=N82E16813131225
If you want to go SLI, you should get the EVGA 680i. It doesnt overclock as well as the P35 chipset.

XeoBllaze · « **Reply #17 on:** July 12, 2009, 08:36:16 AM »

Depends which CPU, Stepping, HSF, Chipset and Ram.

I'm running the C2D E8400 Wolfdale processor + stock HSF with the Intel P45 chipset and Centon PC2-5300 memory.

I can overclock my CPU @ 3.8GHz stable 24/7 and around 4GHz+ with additional cooling and light benchmark software.

PspKicks316 · « **Reply #18 on:** July 12, 2009, 09:00:30 AM »

What the hell are you bumping a 2 year old topic for?!

loganbyers07 · « **Reply #19 on:** July 12, 2009, 09:46:50 AM »

He just wanted to put his 2 cents in.

PspKicks316 · « **Reply #20 on:** July 12, 2009, 02:50:39 PM »

Quote from: loganbyers07 on July 12, 2009, 09:46:50 AM

He just wanted to put his 2 cents in.

Against the rules to bump old topics...especially 2 year old ones made by someone who hasn't been around in a year and a half!

loganbyers07 · « **Reply #21 on:** July 12, 2009, 07:11:23 PM »

Your right, I was just stating my oppinion. He shouldn't of bumped it but we should not be arguing with him about why he bumped it.

News:

Author Topic: overclocking question (Read 5625 times)