« previous next »
Pages: [1]   Go Down

Author Topic: Help!?!  (Read 2301 times)

Offline TeHKuRlZz

  • Chief squatting Hard
  • *
  • Posts: 19
  • Post quality +0/-0
  • Gender: Male
  • Acidmods User
Help!?!
« on: July 18, 2009, 02:04:31 AM »
I have a 4gig memory card and i droped my PSP and it says I have 0KB and I used it on my friends PSP and it said I have 1gig left. . Any help?

 
Logged

Offline ApheX

  • Club AM VIP
  • Millennium Poster
  • *
  • Posts: 1094
  • Post quality +1/-0
  • Gender: Male
  • PSP And PSP Slim Case/Hardware Modder
    • ApheX MoDs
Re: Help!?!
« Reply #1 on: July 18, 2009, 02:14:29 AM »
Have you tried testing another memory card in your psp? if your having the same problem, then it's to do with the mobo. If not then the card is damaged.

It's possible part of the memory card slot on your slim is damaged. One of the pins connecting to the card maybe out of place. the only thing you can do is take the psp apart, check to see if any of them are out of place.

Logged

Offline EliteGamer83

  • Millennium Poster
  • *
  • Posts: 1233
  • Post quality +0/-0
  • Gender: Male
  • Trusted Seller! Slim Modder! Graphics Artist!
Re: Help!?!
« Reply #2 on: July 18, 2009, 06:05:49 AM »
I think the easiest thing to do is plug the car directly into your PC and see if your PC reads it.
Logged

Offline ApheX

  • Club AM VIP
  • Millennium Poster
  • *
  • Posts: 1094
  • Post quality +1/-0
  • Gender: Male
  • PSP And PSP Slim Case/Hardware Modder
    • ApheX MoDs
Re: Help!?!
« Reply #3 on: July 18, 2009, 10:47:07 AM »
That's cool to see if the cards working, but it isn't gonna tell you much if it's the console that's damaged.
Test the card as elite said in a PC and try another card in the psp to see if you have the same problem.
« Last Edit: July 18, 2009, 10:48:58 AM by ApheX »
Logged

Offline TeHKuRlZz

  • Chief squatting Hard
  • *
  • Posts: 19
  • Post quality +0/-0
  • Gender: Male
  • Acidmods User
Re: Help!?!
« Reply #4 on: July 18, 2009, 12:30:58 PM »
My PC does read the card.
I tried a different card and it didn't read it on my PSP.
So it's the mobo?
« Last Edit: July 18, 2009, 12:47:51 PM by TeHKuRlZz »
Logged

Offline bustinthejustin

  • Registered BST
  • E = MC² Mad Scientist
  • *
  • Posts: 2326
  • Post quality +1/-0
  • Gender: Male
Re: Help!?!
« Reply #5 on: July 18, 2009, 12:52:53 PM »
Yeah, unfortunately. I could be your card slot on your PSP is bent, then you could get away with just replacing the card slot.
Logged

Sig by Kenshinffx - Thanks!

Offline TeHKuRlZz

  • Chief squatting Hard
  • *
  • Posts: 19
  • Post quality +0/-0
  • Gender: Male
  • Acidmods User
Re: Help!?!
« Reply #6 on: July 18, 2009, 01:56:18 PM »
How can I replace the slot?
Logged

Offline bustinthejustin

  • Registered BST
  • E = MC² Mad Scientist
  • *
  • Posts: 2326
  • Post quality +1/-0
  • Gender: Male
Re: Help!?!
« Reply #7 on: July 18, 2009, 02:03:36 PM »
Well you can buy a replacement one from dealextreme.com. Then it's a matter of desoldering the old one and resoldering a new one.
Logged

Sig by Kenshinffx - Thanks!

Offline TeHKuRlZz

  • Chief squatting Hard
  • *
  • Posts: 19
  • Post quality +0/-0
  • Gender: Male
  • Acidmods User
Re: Help!?!
« Reply #8 on: July 18, 2009, 02:47:00 PM »
Quote from: bustinthejustin on July 18, 2009, 02:03:36 PM
Well you can buy a replacement one from dealextreme.com. Then it's a matter of desoldering the old one and resoldering a new one.

I need to solder the slot off then put the new one?
This slot? Making sure.
http://dealextreme.com/details.dx/sku.21995
And is the Full Housing good at DealExtreme?
Logged

Offline bustinthejustin

  • Registered BST
  • E = MC² Mad Scientist
  • *
  • Posts: 2326
  • Post quality +1/-0
  • Gender: Male
Re: Help!?!
« Reply #9 on: July 18, 2009, 04:01:08 PM »
Yes that slot should work. And the full housings aren't perfect, but they're still pretty good and they're cheap =D
Logged

Sig by Kenshinffx - Thanks!

Offline TeHKuRlZz

  • Chief squatting Hard
  • *
  • Posts: 19
  • Post quality +0/-0
  • Gender: Male
  • Acidmods User
Re: Help!?!
« Reply #10 on: July 18, 2009, 04:53:07 PM »
So do I need to unsolder then solder it?
Logged

Offline bustinthejustin

  • Registered BST
  • E = MC² Mad Scientist
  • *
  • Posts: 2326
  • Post quality +1/-0
  • Gender: Male
Re: Help!?!
« Reply #11 on: July 18, 2009, 05:17:34 PM »
Yeah you have to desolder the old one, and then resolder the new one.
Logged

Sig by Kenshinffx - Thanks!

Offline TeHKuRlZz

  • Chief squatting Hard
  • *
  • Posts: 19
  • Post quality +0/-0
  • Gender: Male
  • Acidmods User
Re: Help!?!
« Reply #12 on: July 18, 2009, 05:51:02 PM »
How do I desolder?
Logged

Offline bustinthejustin

  • Registered BST
  • E = MC² Mad Scientist
  • *
  • Posts: 2326
  • Post quality +1/-0
  • Gender: Male
Re: Help!?!
« Reply #13 on: July 18, 2009, 06:28:12 PM »
Um.. do you know how to solder?

You should atleast learn to solder first. And if you don't know how to solder/desolder, you might not want to try this...

An easy way though, would be to snip off the pins of the slot, and then individually desolder each pin.
« Last Edit: July 18, 2009, 06:34:12 PM by bustinthejustin »
Logged

Sig by Kenshinffx - Thanks!

Offline TeHKuRlZz

  • Chief squatting Hard
  • *
  • Posts: 19
  • Post quality +0/-0
  • Gender: Male
  • Acidmods User
Re: Help!?!
« Reply #14 on: July 19, 2009, 12:59:12 AM »
Quote from: bustinthejustin on July 18, 2009, 06:28:12 PM
Um.. do you know how to solder?

You should atleast learn to solder first. And if you don't know how to solder/desolder, you might not want to try this...

An easy way though, would be to snip off the pins of the slot, and then individually desolder each pin.

No I don't know how solder  :(
I can practice on some old mobo I have from a PSP phat.
I can just a regular solder to de-solder?
 
« Last Edit: July 19, 2009, 12:05:54 PM by TeHKuRlZz »
Logged
Pages: [1]   Go Up
« previous next »
 
SMF spam blocked by CleanTalk
SimplePortal 2.3.5 © 2008-2012, SimplePortal